ETC HG4117/012-Z2S Auto motive subminiature pcb power relay Datasheet

HG4117
Automotive Subminiature PCB Power Relay
FEATURES
15A continuous current capacity
Six different contact forms
Available with open, dust cover and sealed version
Automotive-oriented design
TYPICAL AUTOMOTIVE APPLICATIONS
Flasher
Interval wiper control
Fuel pump control
Anti-theft alarm system
Automatic mirror adjustment
Air conditioning
Door lock
ABS
Belt tension adjustment
Power window
CONTACT DATA
1 Form A 1 Form B
Form
(H)
Max. Switching Current
60A
(S:100A)
20A
Make
Break
Material
Initial Contact Resistance
Max. Switching Voltage
Max. Continuous Current
Min. Load
Mechanical
Service Life
Electrical
15A
(D)
12A
10A
10A
1 Form C (Z)
1 Form U 1 Form V
(SH)
(SD)
NO
NC
60A
2 x 40A
12A
2
x 8A
(S:70A)
(S:100A)
2 x 20A
2 x 7A
20A
10A
AgNi0.15, AgSnOInO
100 mΩ max. at 0.1A, 6VDC
See curve, current dependent
15A
10A
2 x 10A
2 x 7A
0.5A, 5VDC
107 ops.
5
2 x 10 ops, see Note 4
1 Form W (SZ)
NO
NC
2 x 30A
2
x 5A
(S:50A)
2 x 15A
2 x 5A
2 x 7A
2 x 5A
COIL DATA
Coil Voltage
Code
Nominal
Voltage
( VDC)
Resistance
(Ω) ±10%
006
012
024
6
12
24
28
130
520
Allowable
Voltage
( VDC)
Must Operate Voltage max.
( VDC)
A, B, C, U, V
3.75
7.50
15.00
W
4.5
9.0
18.0
8
16
31
Must Release Voltage min.
( VDC)
B, V
0.35
0.70
1.40
A, C, U, W
0.7
1.4
2.8
CHARACTERISTICS
Operate Time
Release Time
Insulation Resistance
Dielectric Strength
Shock Resistance
Vibration Resistance
Drop Resistance
Power Consumption
Ambient Temperature
Weight
3 ms. typical
1.5 ms. typical
100 MΩ, at 500 VDC, 50%RH
500 Vrms, 1 min.
10 g, 11ms.
DA 1.5mm, 20 - 200 Hz, functional
1 M height drop on concrete in final enclosure
1.1 W, approx.
-40ºC to 85ºC operating; -40ºC to 155ºC storage
Open: 8 g; Covered: 12 g, approx.
ORDERING DESIGNATION
Example:
HG4117 /
012 Model
Coil Voltage code
Contact Form
H: 1 Form A ; SH: 1 Form U
D: 1 Form B ; SD: 1 Form V
Z: 1 Form C ; SZ: 1 Form W
Version
Nil: Open; 1: Sealed; 2: Dust Cover
Contact Material
Nil: AgNi10; A: AgNi0.15; C: AgCdO; S: AgSnOInO
Z
1
A
HG4117
1/2
HG4117
REFERENCE CURVES
OVERALL DIMENSIONS, MOUNTING HOLES AND WIRING DIAGRAMS
(mm)
Overall Dimensions
Mounting Holes (Bottom View)
Wiring Diagrams (Bottom View)
NOTES
1.
2.
3.
4.
5.
6.
All parameters, unless otherwise specified, are measured at ambient temperature 23ºC.
Maximum make current refers to inrush current of lamp load.
At ambient temperature of 85ºC, maximum allowable voltage should be reduced to 72%.
Electrical life obtained at resistive or inductive load at 10A, 15VDC for A, B, C, U, V forms, 7A, 15VDC for W form,
with suitable arc-suppression circuit attached with operating frequency of 1 ops/sec.
Custom-made services available with operational quantity. Please let us know your special requirements.
Specifications subject to change without prior notice.
Willow Technologies Limited
Shawlands Court
Newchapel Road
Tel: +44 (0) 1342 835234
Lingfield
Fax: +44 (0) 1342 834306
Surrey RH7 6BL
email: [email protected]
England
HG4117
2/2
Similar pages