Card Edge Type Ribbon Cable Connector HIF5 Series ■ Features 1. Product Variation The area to install the connector body is classified into three types according to full hole mounting area, semi-mounting area and non-mounting area. 2. Mounting Density Enhancement This connector is designed so that the ribbon cable can turn back within the connector molding range. The connector can be installed without coming out of the insulator. 3. Applicable Cable The applicable cable is a <UL2651>AWG#28 flat cable (7 pcs./0.127mm, jacket dia.: 0.8~1.0mm). ■ Applications Computers, FDD, various kinds of electronic equipment. ■ Product Specifications Current rating: 1A Voltage rating: 200V AC Rating Item Operating Temperature Range:–55 to +85ç (Note 1) Operating Moisture Range:40 to 80% Storage Temperature Range:–10 to +60ç(Note 2) Storage Humidity Range:40 to 70% (Note 2) Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1µs or more 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle No damage, cracks, or parts looseness. (–55ç: 30 minutes ➝15 to 35ç: 5 minutes max. 125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles 7. Durability (Mating/un-mating) Contact resistance15m ohms max. 500 cycles 8. Resistance to Flow: 260ç for 10 seconds No deformation of components affecting performance. Soldering heat Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■ Material Part Material Finish Insulator PBT Black Contact Copper alloy Remarks UL94V-0 Contact area Gold plated Connection area Tin-lead plated --------------- ■ Ordering Information HIF5 1 B - * D A - 2.54 R 2 3 4 5 6 7 1 Series Name: HIF 5 4 Contact alignment: D : Double 2 Mold type B: With full mounting hole 5 Plating type: A : Selective gold plated C: With half mounting hole 6 Contact Pitch: 2.54mm D: Without mounting hole 7 Connection type: R : Ribbon cable 3 Number of contacts: 20, 26, 34, 40, 50, 60 B55 ■ With Mounting Full Hole Number of Contacts A HIF5B-20DA-2.54R 564-0014-5 Part Number CL No. 20 56 HIF5B-26DA-2.54R 564-0015-8 26 63.62 55.88 43.66 35.66 30.48 31.75 41.16 HIF5B-34DA-2.54R 564-0016-0 34 73.78 66.04 53.82 45.82 40.64 41.91 51.32 HIF5B-40DA-2.54R 564-0017-3 40 81.40 73.66 61.44 53.44 48.26 49.53 58.94 HIF5B-50DA-2.54R 564-0018-6 50 94.10 86.36 74.14 66.14 60.96 62.23 71.64 HIF5B-60DA-2.54R 564-0019-9 60 106.8 99.06 86.84 78.84 73.66 74.93 84.34 B C D E F H 48.26 36.04 28.04 22.86 24.13 33.54 ■ With Mounting Half hole Part Number B56 CL No. Number of Contacts A B C D E F H HIF5C-20DA-2.54R 564-0020-8 20 50.80 45.72 36.04 28.04 22.86 24.13 33.54 HIF5C-26DA-2.54R 564-0021-0 26 58.42 53.34 43.66 35.66 30.48 31.75 41.16 HIF5C-34DA-2.54R 564-0022-3 34 68.58 63.50 53.82 45.82 40.64 41.91 51.32 HIF5C-40DA-2.54R 564-0023-6 40 76.20 71.12 61.44 53.44 48.26 49.53 58.94 HIF5C-50DA-2.54R 564-0024-9 50 88.90 83.82 74.14 66.14 60.96 62.23 71.64 HIF5C-60DA-2.54R 564-0025-1 60 101.6 96.52 86.84 78.84 73.66 74.93 84.34 ■ Without Mounting Hole Part Number CL No. Number of Contacts A B C D E HIF5D-20DA-2.54R 564-0026-4 20 36.04 28.04 22.86 24.13 33.54 HIF5D-26DA-2.54R 564-0027-7 26 43.66 35.66 30.48 31.75 41.16 HIF5D-34DA-2.54R 564-0028-0 34 53.82 45.82 40.64 41.91 51.32 HIF5D-40DA-2.54R 564-0029-2 40 61.44 53.44 48.26 49.53 58.94 HIF5D-50DA-2.54R 564-0030-1 50 74.14 66.14 60.96 62.23 71.64 HIF5D-60DA-2.54R 564-0031-4 60 86.84 78.84 73.66 74.93 84.34 B57 BPCB Dimensions Number of Contacts 20 26 34 40 50 60 A 22.86 30.48 40.64 48.26 60.96 73.66 B 27.84 35.46 45.62 53.24 65.94 78.64 Note. Using the polarizing key prevents mis-insertion in the printed board. For use, insert the polarizing key so as to hit the mold bottom. BPolarizing Key Part Number CL No. Material CR7C-GPIN 507-0055-8 Poly acetal resin, white HIF5B-GPIN 564-0052-4 PBT, beige BPanel Cutouts Unit: mm B58 Number of Contacts 20 26 34 40 50 60 mounting Half hole size A 45.72 53.34 63.50 71.12 83.82 96.52 mounting Full hole size A 48.26 55.88 66.04 73.66 86.36 99.06 BConnection Procedures Note 1. Cable length tolerance Less than 500 +100 (mm) Note 2. When a cable such as a twist cable or a slit More than 500 pcs. % (like a roller screen) cable is used, the cable pitch will slightly change according to cable +3 0 manufacturers. If connection failure has occurred, consult HRS Sales Department. HIF5B Type HIF5B Type (No cable clamp) AO Connection HIF5B Type AO Connection HIF5B Type (No cable clamp) BO Connection HIF5B Type BO Connection HIF5B Type (No cable clamp) CO Connection HIF5B Type CO Connection HIF5B Type (No cable clamp) DO Connection HIF5C Type AO Connection HIF5C Type BO Connection DO Connection HIF5C Type (No cable clamp) AO Connection HIF5C Type (No cable clamp) BO Connection B59 HIF5C Type CO Connection HIF5C Type DO Connection HIF5D Type AO Connection HIF5D Type BO Connection HIF5D Type CO Connection HIF5D Type DO Connection B60 HIF5C Type (No cable clamp) CO Connection HIF5C Type (No cable clamp) DO Connection HIF5D Type (No cable clamp) AO Connection HIF5D Type (No cable clamp) BO Connection HIF5D Type (No cable clamp) CO Connection HIF5D Type (No cable clamp) DO Connection