Mean Well HLG-150-48 150w single output switching power supply Datasheet

HLG-150
150W Single Output Switching Power Supply
series
Features :
Universal AC input / Full range
Built-in active PFC function
High efficiency up to 94%
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistance)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.9)
F
HLG-150-12 A
110
M
M
SELV
IP65 IP67
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
HLG-150-12
HLG-150-15
HLG-150-20
HLG-150-24
HLG-150-30
HLG-150-36
HLG-150-42
HLG-150-48
HLG-150-54
DC VOLTAGE
12V
15V
20V
24V
36V
42V
48V
54V
RATED CURRENT
12.5A
10A
7.5A
6.3A
30V
5A
4.2A
3.6A
3.2A
2.8A
RATED POWER
150W
150W
150W
151.2W
150W
151.2W
151.2W
153.6W
151.2W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
200mVp-p
VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V
13.5 ~ 17V
17 ~ 22V
22 ~ 27V
27 ~ 33V
33 ~ 40V
38 ~ 46V
43 ~ 53V
49 ~ 58V
2.5 ~ 4.2A
2.16 ~ 3.6A
1.92 ~ 3.2A
1.68 ~ 2.8A
MODEL
OUTPUT
Can be adjusted by internal potentiometer or through output cable
CURRENT ADJ. RANGE
7.5 ~ 12.5A
3.8 ~ 6.3A
3 ~ 5A
2.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIME
1.5%
2.0%
Note.7 2500ms, 80ms at full load
16ms at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.4 90 ~ 264VAC
230VAC / 115VAC ; B type 2500ms, 200ms at 95% load
230VAC / 115VAC
230VAC / 115VAC
127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.95/230VAC (Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)
92%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER CURRENT
SHORT CIRCUIT
PROTECTION
4.5 ~ 7.5A
2.5%
LOAD REGULATION
INPUT
6 ~ 10A
VOLTAGE TOLERANCE Note.3
OVER VOLTAGE
93%
92.5%
1.7A / 115VAC
0.75A / 230VAC
COLD START 75A/230VAC
93.5%
93.5%
93.5%
94%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
47 ~ 53V
34 ~ 38V
14 ~ 17V
18 ~ 21V
28 ~ 34V
41 ~ 46V
23 ~ 27V
59 ~ 65V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
WORKING TEMP.
-40 ~ +70
SAFETY STANDARDS Note.6
54 ~ 60V
<0.75mA / 240VAC
100
10 (RTH2)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
VIBRATION
94%
95 ~ 108%
OVER TEMPERATURE
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
94%
(Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80
0.03%/
, 10 ~ 95% RH
(0 ~ 50
)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;
design refer to UL60950-1, TUV EN60950-1
SAFETY & WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
EMC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 60% load) ; EN61000-3-3
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
I/P-FG:1.88KVAC
O/P-FG:0.5KVAC
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
192.2Khrs min. MIL-HDBK-217F (25 )
228*68*38.8mm (L*W*H)
1.15Kg; 12pcs/14.8Kg/0.74CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. Type A only.
6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. Refer to warranty statement.
HLG-150
150W Single Output Switching Power Supply
Mechanical Specification
Case No.994D
series
Unit:mm
Blank:(HLG-150)
228
204
12
9.4
9.6
300 20
34.2
T case
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
102
300 20
9.4
34
SJTW 18AWG 3C
SJTW 14AWG 2C
4.2 4PL
-V(Black)
+V(Red)
38.8
T case: Max. Case Temperature.
IP67 rated. Cable for I/O connection.
A Type:(HLG-150-_A)
228
204
12
9.4
9.6
Vo
ADJ.
300 20
34.2
T case
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
Io
ADJ.
102
300 20
9.4
34
SJTW 18AWG 3C
SJTW 14AWG 2C
4.2 4PL
-V(Black)
+V(Red)
38.8
T case: Max. Case Temperature.
IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
B Type:(HLG-150-_B)
228
204
12
9.6
9.4
300 20
SJTW 18AWG 2C
68
T case
102
SJTW 14AWG 2C
34
SJTW 18AWG 3C
DIM+(Blue)
DIM-(White)
-V(Black)
+V(Red)
4.2 4PL
T case: Max. Case Temperature.
38.8
9.4
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
34.2
300 20
File Name:HLG-150-SPEC 2012-03-01
HLG-150
150W Single Output Switching Power Supply
series
D Type(option):(HLG-150-_D)
228
204
12
9.4
9.6
300 20
34.2
T case
102
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
300 20
9.4
34
SJTW 18AWG 3C
-V(Black)
+V(Red)
SJTW 14AWG 2C
4.2 4PL
38.8
T case: Max. Case Temperature.
IP67 rated. Timer dimming function, contact MEAN WELL for details.
Block Diagram
Fosc : 100KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
DIM+
DIM(B Type)
O.L.P.
FG
O.L.P.
PFC
CONTROL
DETECTION
CIRCUIT
PWM
CONTROL
O.T.P.
O.V.P.
Derating Curve
Static Characteristics
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-40
-25
-10
0
15
30
50
AMBIENT TEMPERATURE ( )
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
264
INPUT VOLTAGE (V) 60Hz
File Name:HLG-150-SPEC 2012-03-01
HLG-150
150W Single Output Switching Power Supply
series
Power Factor Characteristic
Constant Current Mode
PF
1 .0 0
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9 0
0 .8 8
0 .8 6
0 .8 4
0 .8 2
0 .8 0
0 .7 8
230V ac
115V ac
50%
60%
70%
80%
90%
100%
(150W)
LOAD
EFFICIENCY vs LOAD (48V Model)
HLG-150 series possess superior working efficiency that up to 94% can be reached in field applications.
94
EFFICIENCY (%)
90
86
230Vac
82
115Vac
78
74
70
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
Vo(%)
100
(A) Constant
Voltage area
(B)
Constant
Current area
50
50
100
Io (%)
Typical LED power supply I-V curve
File Name:HLG-150-SPEC 2012-03-01
HLG-150
150W Single Output Switching Power Supply
series
DIMMING OPERATION
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
HLG-150
-V(Black)
+V(Red)
Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
Please DO NOT connect "DIM-" to "-V".
Reference resistance value for output current adjustment (Typical)
Resistance value
10K
Percentage of rated current
10%
20K
30K
20%
30%
40K
50K
40%
60K
70K
80K
90K
OPEN
100K
50%
60%
70%
80%
90%
100%
102%~108%
1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
102%~108%
10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
102%~108%
Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to
achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
Dimming connection diagram for turning the lighting fixture ON/OFF :
N
FG
L
Switch
Relay
Adjuster
0~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Green/
Yellow
Brown
Blue
AC/L
HLG-150
B Type
AC/N
DIM+
DIMV(-)
V(+)
Blue
White
Black
Red
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HLG-150-SPEC 2012-03-01
HLG-150
150W Single Output Switching Power Supply
series
WATERPROOF CONNECTION
Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-150 to operate in dry/wet/damp or outdoor environment.
AC
source
HLG-150
I/P
Size
O/P
Size
Pin Configuration (Female)
M12
Order No.
Suitable Current
4-PIN
5A/PIN
M12-04
10A max.
Pin Configuration (Female)
M15
5-PIN
5A/PIN
M12-05
10A max.
2-PIN
12A/PIN
M15-02
12A max.
Order No.
Suitable Current
LED Lamp
Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
20
25
66
26
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HLG-150
O/P Wires
CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
Junction Box(Option )
10
76
5
8.5
SJTW 18AWG 3C
-V(Black)
+V(Red)
32
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
61
8.5 6
204
366
SJTW 14AWG 2C
2- 5
3- PF 1/2"
3- PF 1/2"
150 20
35
38.8
150 20
Optional junction box available for A / Blank - type , please contact MEAW WELL for details.
86
File Name:HLG-150-SPEC 2012-03-01
Similar pages