Mean Well HLG-60H-42 60w single output switching power supply Datasheet

HLG-60H
60W Single Output Switching Power Supply
series
Features :
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistance)
Suitable for LED lighting and moving sign applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet location
5 years warranty (Note.10)
F
HLG-60H-12 A
110
M
M
SELV
IP65 IP67
( for 48V,54V only)
( except for 48V,54V )
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
DC VOLTAGE
HLG-60H-15
HLG-60H-20
HLG-60H-24
HLG-60H-30
HLG-60H-36
HLG-60H-42
HLG-60H-48
HLG-60H-54
15V
20V
24V
30V
36V
42V
48V
54V
12 ~ 20V
14.4 ~ 24V
25.2 ~ 42V
28.8 ~ 48V
32.4 ~ 54V
4A
3A
2.5A
18 ~ 30V
2A
21.6 ~ 36V
RATED CURRENT
1.7A
1.45A
1.3A
1.15A
RATED POWER
60W
60W
60W
60W
61.2W
60.9W
62.4W
62.1W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
200mVp-p
200mVp-p
300mVp-p
300mVp-p
300mVp-p
VOLTAGE ADJ. RANGE Note.6 13.5 ~ 17V
17 ~ 22V
22 ~ 27V
27 ~ 33V
33 ~ 40V
40 ~ 46V
44 ~ 53V
49 ~ 58V
0.87 ~ 1.45A
0.78 ~ 1.3A
0.69 ~ 1.15A
CONSTANT CURRENT REGION Note.4 9 ~ 15V
OUTPUT
Can be adjusted by internal potentiometer or through output cable
CURRENT ADJ. RANGE
2.4 ~ 4A
1.8 ~ 3A
1.2 ~ 2A
1 ~ 1.7A
VOLTAGE TOLERANCE Note.3
2.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
1.5%
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIME
Note.8 1500ms, 80ms / 115VAC at full load
16ms/230VAC
HOLD UP TIME (Typ.)
VOLTAGE RANGE
INPUT
Note.5 90 ~ 305VAC
1000ms, 80ms / 230VAC at full load
16ms/115VAC at full load
127 ~ 431VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)
89%
87.5%
89.5%
0.64A / 115VAC
0.32A / 230VAC
COLD START 70A/230VAC
AC CURRENT (Typ.)
INRUSH CURRENT(Typ.)
OVER CURRENT
90%
90%
Note.4
SHORT CIRCUIT
OVER VOLTAGE
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
48 ~ 58V
35 ~ 43V
18 ~ 24V
28 ~ 35V
41 ~ 49V
23 ~ 30V
WORKING TEMP.
-40 ~ +70
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS Note.7
-40 ~ +80
0.03%/
, 10 ~ 95% RH
(0 ~ 60
)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 independent ; IP65 or IP67 approved ;
Design refer to UL60950-1, TUV EN60950-1, EN60335-1
EMC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C ( 60% load) ; EN61000-3-3
ISOLATION RESISTANCE
PACKING
NOTE
59 ~ 68V
(Refer to "Derating Curve")
I/P-O/P:3.75KVAC
DIMENSION
54 ~ 63V
20 ~ 95% RH non-condensing
SAFETY & WITHSTAND VOLTAGE
OTHERS
90.5%
Protection type : Shut down o/p voltage, re-power on to recover
95
10 (RTH2)
Protection type : Shut down o/p voltage, re-power on to recover
EMC IMMUNITY
MTBF
90.5%
95 ~ 108%
OVER TEMPERATURE
EMC EMISSION
90%
0.3A / 277VAC
<0.75mA / 277VAC
LEAKAGE CURRENT
PROTECTION
1.5 ~ 2.5A
I/P-FG:1.88KVAC
O/P-FG:0.5KVAC
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A
338Khrs min. MIL-HDBK-217F (25 )
171*61.5*36.8mm (L*W*H)
0.73Kg; 20pcs/15.6Kg/0.8CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. Type A only.
7. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
10. Refer to warranty statement.
HLG-60H
60W Single Output Switching Power Supply
Mechanical Specification
Case No.957B
series
Unit:mm
Blank:(HLG-60H)
171
147.2
11.9
9.6
300 20
300 20
T case
73.6
+V(Red)
-V(Black)
30.75
32
46.5
61.5
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
SJTW 18AWG 3C
SVT 18AWG 2C
4.2 4PL
36.8
T case: Max. Case Temperature.
IP67 rated. Cable for I/O connection.
A Type:(HLG-60H-_A)
171
147.2
11.9
9.6
300 20
300 20
T case
30.75
32
46.5
61.5
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
SJTW 18AWG 3C
73.6
Io
ADJ
+V(Red)
-V(Black)
SVT 18AWG 2C
Vo
ADJ
4.2 4PL
36.8
T case: Max. Case Temperature.
IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
B Type:(HLG-60H-_B)
171
147.2
11.9
9.6
300 20
SVT 18AWG 2C
73.6
UL 2517 18AWG 2C
+V(Red)
-V(Black)
DIM+(Blue)
DIM-(White)
4.2 4PL
T case: Max. Case Temperature.
36.8
SJTW 18AWG 3C
T case
30.75
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
32
46.5
61.5
300 20
File Name:HLG-60H-SPEC 2011-08-31
HLG-60H
60W Single Output Switching Power Supply
series
D Type(option):(HLG-60H-_D)
171
147.2
11.9
9.6
300 20
300 20
T case
73.6
+V(Red)
-V(Black)
30.75
32
46.5
61.5
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
SJTW 18AWG 3C
SVT 18AWG 2C
4.2 4PL
36.8
T case: Max. Case Temperature.
IP67 rated. Timer dimming function, contact MEAN WELL for details.
Block Diagram
Fosc : 100KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
DIM+
DIM(B Type)
O.L.P.
O.T.P.
FG
O.L.P.
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
100
90
80
80
230VAC
Input only
70
LOAD (%)
LOAD (%)
60
40
20
-40
-25
-10
0
15
30
50
AMBIENT TEMPERATURE ( )
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:HLG-60H-SPEC 2011-08-31
60W Single Output Switching Power Supply
HLG-60H
series
Power Factor Characteristic
PF
Constant Current Mode
1
0 .9 9
0 .9 8
0 .9 7
0 .9 6
0 .9 5
0 .9 4
0 .9 3
0 .9 2
0 .9 1
0 .9
0 .8 9
0 .8 8
0 .8 7
0 .8 6
0 .8 5
0 .8 4
277VAC
230VAC
115VAC
50%
60%
70%
80%
90%
100%
(60W)
LOAD
EFFICIENCY vs LOAD (48V Model)
EFFICIENCY (%)
HLG-60H series possess superior working efficiency that up to 90.5% can be reached in field applications.
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
277VAC
230VAC
115VAC
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
(B)
Constant
Current area
Vo(%)
100
(A) Constant
Voltage area
60
(max.)
(C)
Hiccup
Protection
50
95
Io (%)
Typical LED power supply I-V curve
File Name:HLG-60H-SPEC 2011-08-31
HLG-60H
60W Single Output Switching Power Supply
series
DIMMING OPERATION
+V(Red)
-V(Black)
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
HLG-60H
DIM+(Blue)
DIM-(White)
Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
Please DO NOT connect "DIM-" to "-V".
Reference resistance value for output current adjustment (Typical)
OPEN
Single driver
60K
100K
20K
10K
30K
40K
50K
70K
80K
90K
Resistance
Multiple
drivers
value
(N=driver quantity for synchronized 10K
/N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N
-----
dimming operation)
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~105%
1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~105%
10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~105%
Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to
achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
Dimming connection diagram for turning the lighting fixture ON/OFF :
N
FG
L
Switch
Relay
Adjuster
0~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Green/
Yellow
Brown
Blue
AC/L
HLG-60H
B Type
AC/N
DIM+
DIMV(-)
V(+)
Blue
White
Black
Red
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HLG-60H-SPEC 2011-08-31
HLG-60H
60W Single Output Switching Power Supply
series
WATERPROOF CONNECTION
Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-60H to operate in dry/wet/damp or outdoor environment.
AC
source
HLG-60H
I/P
Size
O/P
Pin Configuration (Female)
M12
Order No.
Suitable Current
4-PIN
5A/PIN
M12-04
10A max.
5-PIN
5A/PIN
M12-05
10A max.
Size
Pin Configuration (Female)
M15
2-PIN
12A/PIN
M15-02
12A max.
Order No.
Suitable Current
LED Lamp
Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
20
25
66
26
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HLG-60H
O/P Wires
CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
File Name:HLG-60H-SPEC 2011-08-31
Similar pages