HP HLMA-KH00 T-13/4 (5 mm), t-1 (3 mm), high performance alingap led lamp Datasheet

H
T-13/4 (5 mm), T-1 (3 mm), High
Performance AlInGaP LED
Lamps
SunPower Series
HLMA-CX00 Series
HLMA-DX00 Series
HLMA-KX00 Series
HLMT-CX00 Series
HLMT-DX00 Series
Technical Data
Features
Description
• Outstanding LED Material
Efficiency
• High Light Output over a
Wide Range of Currents
• Low Electrical Power
Dissipation
• CMOS/MOS Compatible
• Colors: 590/592 nm Amber,
615/617 nm and 622 nm
Reddish-Orange
• Variety of Packages Available
These untinted, non-diffused, solid
state lamps utilize the latest
absorbing/transparent substrate
aluminum indium gallium phosphide (AS/TS AlInGaP) LED technology. These materials have a very
high luminous efficiency, capable
of producing high light output over
a wide range of drive currents. In
addition, these LED lamps are at
wavelengths ranging from amber
to reddish orange and at viewing
angles ranging from 7 to 45
degrees.
Applications
• Outdoor Message Boards
• Safety Lighting Equipment
• Signaling Applications
• Emitter for Emitter/
Detector Applications
• Changeable Message Signs
• Portable Equipment
• Medical Equipment
• Automotive Lighting
• Alternative to Incandescent
Lamps
5963-2323E
1-37
Package Dimensions
9.19 (0.362)
8.43 (0.332)
12.70 (0.500)
11.94 (0.470)
9.19 (0.362)
8.43 (0.332)
0.89 (0.035)
0.64 (0.025)
CATHODE
LEAD
3.18 (0.125)
2.67 (0.105)
5.08 (0.200)
4.57 (0.180)
5.08 (0.200)
4.57 (0.180)
3.43 (0.135)
2.92 (0.115)
4.70 (0.185)
4.19 (0.165)
6.35 (0.250)
5.58 (0.220)
0.89 (0.035)
0.64 (0.025)
1.65 (0.065)
1.35 (0.053)
CATHODE
LEAD
NOTE 1
23.0
MIN.
(0.90)
0.102 (0.004)
MAX. TYP.
1.02
(0.040) NOM.
0.45 SQUARE NOMINAL
(0.018)
25.40
MIN.
(1.00)
25.40
MIN.
(1.00)
1.27
NOM.
(0.050)
2.54 NOM.
(0.100)
1.27 NOM.
(0.050)
1.27 NOM.
(0.050)
0.64 SQUARE
(0.025) NOMIMAL
0.46 SQUARE
(0.018) NOMIMAL
CATHODE
6.10 (0.240)
5.59 (0.220)
6.10 (0.240)
5.59 (0.220)
2.54 NOM.
(0.100)
A
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. THE LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040")
DOWN THE LEADS, UNLESS OTHERWISE NOTED.
1-38
2.54 NOM.
(0.100)
NOTES
B
C
Absolute Maximum Ratings at TA = 25°C
(T-13/4 Package)
DC Forward Current[1,4,5] ........................................................... 50 mA
Peak Forward Current[2] ........................................................... 200 mA
Time Average Input Power[2] ................................................... 103 mW
Transient Forward Current[3] (10 µs Pulse) .............................. 500 mA
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
Operating Temperature Range .......................................... -40 to 100°C
Storage Temperature ......................................................... -40 to 120°C
Junction Temperature ................................................................. 130°C
Soldering Temperature .......................................... 260°C for 5 seconds
[1.59 mm (0.06 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the
Max Allowable Time Average Power as specified in Figure 5.
3. The transient peak current is the maximum nonrecurring peak current the device can
withstand without damaging the LED die and wire bonds.
4. Drive Currents between 10 and 30 mA are recommended for best long term
performance.
5. Operation at currents below 10 mA is not recommended, please contact your
Hewlett-Packard sales representative.
Absolute Maximum Ratings at TA = 25°C (T-1 Package)
DC Forward Current[1,4,5] ........................................................... 50 mA
Peak Forward Current[2] ........................................................... 200 mA
Time Average Input Power[2] ................................................... 103 mW
Transient Forward Current[3] (10 µs Pulse) .............................. 500 mA
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
Operating Temperature Range .......................................... -40 to 100°C
Storage Temperature ......................................................... -40 to 100°C
Junction Temperature .................................................................. 110°C
Solder Temperature ................................................ 260°C for 5 seconds
[1.59 mm (0.06 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the
Max Allowable Time Average Power as specified in Figure 5.
3. The transient peak current is the maximum nonrecurring peak current the device can
withstand without damaging the LED die and wire bonds.
4. Drive Currents between 10 mA and 30 mA are recommended for best long term
performance.
5. Operation at currents below 10 mA is not recommended, please contact your
Hewlett-Packard sales representative.
1-39
Optical Characteristics at TA = 25°C
TS-AlInGaP T-13/4
Part
Number
HLMTCL00[1]
CH00[1]
DL00[4]
DH00[4]
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min.
Typ.
2600
8300
2900
9000
450
1500
500
1800
Peak
Wavelength
λpeak (nm)
Typ.
594
623
594
623
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
592
617
592
617
Viewing Angle
2θ1/2
Degrees[3]
Typ.
8
8
24
24
Luminous
Efficacy
ηv
(lm/w)
480
263
480
263
Package
Drawing
A
B
Notes:
1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis
of the lamp package.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
4. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern
may not be aligned with this axis.
AS-AlInGaP T-13/4
Part
Number
HLMACL00[1]
CH00[1]
DL00[4]
DH00[4]
DG00[4]
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min.
Typ.
1000
3500
1000
3500
300
800
290
600
290
500
Peak
Wavelength
λpeak (nm)
Typ.
592
621
592
621
630
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
590
615
590
615
622
Viewing Angle
2θ1/2
Degrees[3]
Typ.
7
7
24
24
24
Luminous
Efficacy
ηv
(lm/w)
480
263
480
263
197
Package
Drawing
A
B
Notes:
1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis
of the lamp package.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
4. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern
may not be aligned with this axis.
AS-AlInGaP T-1
Part
Number
HLMAKL00
KH00
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min.
Typ.
35
200
35
200
Peak
Wavelength
λpeak (nm)
Typ.
592
621
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
590
615
Viewing Angle
2θ1/2
Degrees[3]
Typ.
45
45
Luminous
Efficacy
ηv
(lm/w)
480
263
Package
Drawing
C
Notes:
1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern
may not be aligned with this axis.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
1-40
Electrical Characteristics at TA = 25°C
TS-AlInGaP T-13/4
Part
Number
HLMTCL00
CH00
DL00
DH00
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Typ.
Max.
2.0
2.4
2.0
2.4
2.0
2.4
2.0
2.4
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min.
Typ.
5
25
5
25
5
25
5
25
Capacitance
C (pF)
VF = 0,
f = 1 MHz
Typ.
70
70
70
70
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min.
Typ.
5
25
5
25
5
25
5
25
5
25
Capacitance
C (pF)
VF = 0,
f = 1 MHz
Typ.
40
40
40
40
40
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min.
Typ.
5
25
5
25
Capacitance
C (pF)
VF = 0,
f = 1 MHz
Typ.
40
40
Thermal
Resistance
RθJ-PIN (°C/W)
210
210
260
260
Speed of
Response
τs (ns)
Time Constant
e-t/τs
Typ.
13
13
13
13
Thermal
Resistance
RθJ-PIN (°C/W)
210
210
260
260
260
Speed of
Response
τs (ns)
Time Constant
e-t/τs
Typ.
13
13
13
13
13
Thermal
Resistance
RθJ-PIN (°C/W)
290
290
Speed of
Response
τs (ns)
Time Constant
e-t/τs
Typ.
13
13
AS-AlInGaP T-13/4
Part
Number
HLMACL00
CH00
DL00
DH00
DG00
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Typ.
Max.
1.9
2.4
1.9
2.4
1.9
2.4
1.9
2.4
1.9
2.4
AS-AlInGaP T-1
Part
Number
HLMAKL00
KH00
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Typ.
Max.
1.9
2.4
1.9
2.4
1-41
200
RELATIVE INTENSITY
AMBER
IF – FORWARD CURRENT – mA
1.0
REDDISH-ORANGE
0.5
180
160
140
120
100
594 600
621
650
630
40
20
0
1.0
0
550
80
60
700
WAVELENGTH
2.5
70
60
50
40
30
20
10
0
1.5
2.0
2.5
3.0
2.0
1.5
1.0
0.5
50
40
Rθ J-A = 585 °C/W
30
RθJ-A = 780 °C/W
20
10
0
0.0
3.5
0
VF – FORWARD VOLTAGE – V
10
20
30
40
50
0
Figure 3. Relative Luminous Intensity
vs. Forward Current. Derating Based
on TJMAX.
20
40
60
80
100
120
140
TA – AMBIENT TEMPERATURE – °C
IF – DC FORWARD CURRENT – mA
Figure 2b. Forward Current vs.
Forward Voltage, TS-AlInGaP.
3.0
2.5
60
IF – FORWARD CURRENT – mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
IF – FORWARD CURRENT – mA
100
80
2.0
Figure 2a. Forward Current vs.
Forward Voltage, AS-AlInGaP.
Figure 1. Relative Intensity vs. Wavelength.
90
1.5
VF – FORWARD VOLTAGE – V
Figure 4a. Maximum DC Current vs.
Ambient Temperature for AS T-13/4
Lamps. Derating Based on
TJMAX = 130°C.
60
40
Rθ J-A = 566 °C/W
30
RθJ-A = 600 °C/W
20
10
30
25
Rθ J-A = 618 °C/W
RθJ-A = 412 °C/W
20
15
10
0
20
40
60
80
100
120
140
TA – AMBIENT TEMPERATURE – °C
Figure 4b. Maximum DC Current vs.
Ambient Temperature for TS T-13/4
Lamps. Derating Based on
TJMAX = 130°C.
f > 1 KHz
50
40
f > 300 Hz
30
f > 100 Hz
20
10
5
0
0
1-42
40
35
IAVG – AVERAGE CURRENT – mA
45
IF – FORWARD CURRENT – mA
IF – FORWARD CURRENT – mA
50
50
0
0 10 20 30 40 50 60 70 80 90 100
TA – AMBIENT TEMPERATURE – °C
Figure 4c. Maximum Forward Current
vs. Ambient Temperature for T-1
Lamps. Derating Based on
TJMax = 110 °C.
50
100
150
200
IPEAK – PEAK FORWARD CURRENT – mA
Figure 5. Maximum Average Current
vs. Peak Forward Current.
1.0
NORMALIZED INTENSITY
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
20° 18° 16° 14° 12° 10°
8°
6°
4°
0°
2°
4°
2°
8° 10° 12° 14° 16° 18° 20°
6°
θ – ANGULAR DISPLACEMENT – DEGREES
Figure 6. Normalized Luminous Intensity vs. Angular Displacement,
HLMT-CH00/CL00.
100
NORMALIZED INTENSITY
90
80
70
60
50
40
30
20
10
0
20 18 16 14 12 10 8
6
4
2
0
2
4
6
8 10 12 14 16 18 20
θ – ANGULAR DISPLACEMENT – DEGREES
Figure 7. Normalized Luminous Intensity vs. Angular Displacement,
HLMA-DG00/-DH00/-DL00.
1.0
NORMALIZED INTENSITY
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100° 90° 80° 70° 60° 50° 40° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
θ – ANGULAR DISPLACEMENT – DEGREES
Figure 8. Normalized Luminous Intensity vs. Angular
Displacement, HLMA-KH00/-KL00.
1-43
Similar pages