HP HLMP-D120 T-13/4 (5 mm), t-1 (3 mm), high performance, tinted, diffused, alingap, and ts algaas red led lamp Datasheet

H
T-13/4 (5 mm), T-1 (3 mm), High
Performance, Tinted, Diffused,
AlInGaP, and TS AlGaAs Red
LED Lamps
Technical Data
Features
Applications
• High Light Output Over a
Wide Range of Currents
• Popular T-1 and T-1 3/4
Packages
• Choice of Three Colors
Amber
Reddish-Orange
Deep Red
• Wide Viewing Angles
• Long Life: Solid State
Technology
• Available on Tape and Reel
• Outdoor Message Boards
• Automotive Lighting
• Portable Equipment
• Medical Equipment
• Changeable Message Signs
HLMA-DX05 Series
HLMA-KX05 Series
HLMP-D1XX Series
HLMP-J100/J150 Series
Description
The HLMA-D/KXXX series tinted,
diffused, solid state lamps utilize
the newly developed aluminum
indium gallium phosphide
(AlInGaP) LED technology. This
technology has a very high
luminous efficiency, capable of
producing high light output over a
wide range of drive currents.
These LED lamps are available
with a choice of two colors, 592
nm amber and 615 nm reddishorange, and with two viewing
angles, 65° and 60°.
The HLMP-D/JXXX series tinted,
diffused solid state lamps utilize
the highly optimized transparent
substrate aluminum gallium
arsenide (TS AlGaAs) LED
technology. This technology has a
very high luminous efficiency,
Device Selection Guide
Package Description
Viewing
Angle
2θ1/2
Amber
λd = 592 nm
ReddishOrange
λd = 615 nm
Deep
Red
λd = 644 nm
Package
Outline
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
65°
HLMADL05
HLMADH05
A
T-1 (3 mm), Tinted, Diffused,
Standard Current
60°
HLMAKL05
HLMAKH05
B
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
40°
HLMPD115
A
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
25°
HLMPD120
A
T-1 (3 mm), Tinted, Diffused,
Standard Current
55°
HLMPJ100
C
T-1 (3 mm), Tinted, Diffused,
Diffused, Low Current
55°
HLMPJ150
C
5964-9287E
1-49
capable of producing high light
output over the wide range of
drive currents from 500 µA to
50 mA. The color is deep red at a
dominant wavelength of 644 nm.
TS AlGaAs is a flip-chip LED
technology, die attached to the
anode lead and wire bonded to
the cathode lead. Available viewing angles are 25°, 40°, and 55°.
Package Dimensions
5.08 (0.200)
4.57 (0.180)
3.18 (0.125)
2.67 (0.105)
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
3.43 (0.135)
2.92 (0.115)
9.19 (0.362)
8.43 (0.332)
0.89 (0.035)
0.64 (0.025)
4.70 (0.185)
4.19 (0.165)
6.35 (0.250)
5.58 (0.220)
4.70 (0.185)
4.19 (0.165)
6.35 (0.250)
5.58 (0.220)
1.02
(0.040) NOM.
1.02
NOM.
(0.040)
CATHODE
0.45
(0.018)
SQUARE
NOMINAL
0.45 SQUARE NOMINAL
(0.018)
24.13
MIN.
(0.95)
25.40 MIN.
(1.00)
CATHODE
ANODE
24.13
MIN.
(0.95)
CATHODE
ANODE
1.27
NOM.
(0.050)
1.27( 0.050) NOM.
2.54 NOM.
(0.100)
0.45 (0.018)
SQUARE
NOMIMAL
2.54 NOM.
(0.100)
1.27
NOM.
(0.050)
6.10 (0.240)
5.59 (0.220)
CATHODE
2.54 (0.100) NOM.
C
B
A
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND ABOUT
1 mm (0.040") DOWN THE LEADS.
HLMA-DL05/DH05/Kl05/KH05 AlInGaP Lamps
Absolute Maximum Ratings at TA = 25°C
HLMADL05
HLMADH05
HLMAKL05
HLMAKH05
Units
DC Forward Current[1,3,4]
50
50
50
50
mA
Peak Forward Current[2]
200
200
200
200
mA
Average Input Power[2]
103
103
103
103
mW
Reverse Voltage (IR = 100 µA)
5
5
5
5
V
Operating Temperature Range
-40 to
+100
-40 to
+100
-40 to
+100
-40 to
+100
°C
Storage Temperature Range
-55 to
+100
-55 to
+100
-55 to
+100
-55 to
+100
°C
Parameter
Junction Temperature
Soldering Temperature
[1.59 mm (0.06 in.) below seating plane]
110
260°C for 5 second
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 5.
3. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
4. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
1-50
°C
Optical Characteristics at TA = 25°C
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min.
Typ.
Part Number
HLMA-
Peak
Wavelength
λpeak (nm)
Typ.
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
Viewing
Angle
2 θ1/2
Degrees[3]
Typ.
Luminous
Efficacy
ηv
(lm/w)
DL05
35
100
594
592
65
480
DH05
35
100
621
615
65
263
KL05
35
100
594
592
60
480
KH05
35
100
621
615
60
263
Notes:
1. φv is the total luminous flux output as measured with an integrating sphere.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25°C
Part
Number
HLMA-
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Typ.
Max.
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min.
Typ.
Capacitance
C (pF)
VF = 0,
f = 1 mHz
Typ.
Thermal
Resistance
RθJ-PIN (°C/W)
Speed of Response
τs (ns)
Time Constant
e-t/τs
Typ.
DL05
1.9
2.4
5
25
60
260
13
DH05
1.9
2.4
5
25
60
260
13
KL05
1.9
2.4
5
25
60
290
13
KH05
1.9
2.4
5
25
60
290
13
200
RELATIVE INTENSITY
AMBER
IF – FORWARD CURRENT – mA
1.0
REDDISH-ORANGE
0.5
0
550
594
600
621
630
WAVELENGTH – nm
Figure 1. Relative Intensity vs.
Wavelength.
650
700
180
160
140
120
100
80
60
40
20
0
1.0
1.5
2.0
2.5
3.0
VF – FORWARD VOLTAGE – V
Figure 2. Forward Current vs.
Forward Voltage.
1-51
2.5
2.0
1.5
1.0
0.5
45
40
Rθ J-A = 618 °C/W
35
30
RθJ-A = 412 °C/W
25
20
15
10
I AVG – AVERAGE CURRENT – mA
I F – FORWARD CURRENT – mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
50
f ≥ 1 KHz
50
40
f ≥ 300 Hz
30
f ≥ 100 Hz
20
10
5
0.0
0
10
20
30
40
50
0
0
0 10 20 30 40 50 60 70 80 90 100
IF – DC FORWARD CURRENT – mA
Figure 3. Relative Luminous Intensity
vs. Forward Current.
T A – AMBIENT TEMPERATURE – °C
Figure 4. Maximum Forward Current
vs. Ambient Temperature. Derating
Based on TJ Max = 110°C.
1.0
0.9
NORMALIZED INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100° 90° 80° 70° 60° 50° 40° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Spatial Radiation Pattern for HLMA-DL05/DH05 65° Lamps.
1.0
0.9
NORMALIZED INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100° 90° 80° 70° 60° 50° 40° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
ANGULAR DISPLACEMENT – DEGREES
Figure 7. Spatial Radiation Pattern for HLMA-KL05/KH05 60° Lamps.
1-52
50
100
150
200
IPEAK – PEAK FORWARD CURRENT – mA
Figure 5. Maximum Average Current
vs. Peak Forward Current.
HLMP-D115/D120/J100/J150 TS AlGaAs Red Lamps
Absolute Maximum Ratings at TA = 25°C
HLMPD115
HLMPD120
HLMPJ100
HLMPJ150
Units
50
50
50
50
mA
300
300
300
300
mA
100
100
100
100
mW
Reverse Voltage (IR = 100 µA)
5
5
5
5
V
Operating Temperature Range
-55 to
+100
-55 to
+100
-55 to
+100
-55 to
+100
°C
Storage Temperature Range
-55 to
+100
-55 to
+100
-55 to
+100
-55 to
+100
°C
Parameter
DC Forward
Current[1]
Peak Forward
Current[2]
Average Input Power[2]
Junction Temperature
°C
110
Soldering Temperature
[1.59 mm (0.06 in.) below seating plane]
260°C for 5 second
Notes:
1. Derate linearly as shown in Figure 12.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 13.
Optical Characteristics at TA = 25°C
Part Number
HLMP-
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min.
Typ.
Peak
Wavelength
λpeak (nm)
Typ.
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
Viewing
Angle
2 θ1/2
Degrees[3]
Typ.
Luminous
Efficacy
ηv
(lm/w)
D115
138
250
654
644
40
85
D120
138
350
654
644
25
85
J100
39
175
654
644
55
85
J150
1.3
3.0
654
644
55
85
Notes:
1. φv is the total luminous flux output as measured with an integrating sphere.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25°C
Part
Number
HLMP-
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Min.
Typ.
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min.
Typ.
Capacitance
C (pF)
VF = 0
f = 1 mHz
Typ.
Thermal
Resistance
RθJ-PIN (°C/W)
Speed of Response
τs (ns)
Time Constant
e-t/τs
Typ.
D115
1.85
2.4
5
20
20
260
45
D120
1.85
2.4
5
20
20
260
45
J100
1.85
2.4
5
20
20
290
45
J150
1.6
1.9
5
20
20
290
45
1-53
1.0
300
2.4
2.0
10-1
10-2
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
IF – FORWARD CURRENT – mA
RELATIVE INTENSITY
200
100
50
20
10
5
2
600
0
0.5
WAVELENGTH – nm
1.5
2.0
2.5
3.0
3.5
IF – FORWARD CURRENT – mA
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
40
RθJA = 400° C/W
30
RθJA = 550° C/W
20
10
0.1
0
0.0
5
10
20
50
100 200 300
IPEAK – PEAK FORWARD CURRENT – mA
Figure 11. Relative Efficiency vs. Peak
Forward Current.
1-54
0.05
0
20
40
60
80
5
2
1
10
20
50
Figure 10. Relative Luminous Intensity
vs. DC Forward Current.
50
2
0.1
IF – DC FORWARD CURRENT – mA
Figure 9. Forward Current vs.
Forward Voltage.
1.2
1
0.2
VF – FORWARD VOLTAGE – V
Figure 8. Relative Intensity vs.
Wavelength.
ηV – RELATIVE EFFICIENCY
(NORMALIZED AT 20 mA)
1.0
0.5
0.01
0.5
1
1000
700
IAVG = AVERAGE FORWARD CURRENT – mA
10-3
500
1.0
100
TA – AMBIENT TEMPERATURE – °C
Figure 12. Maximum Forward Current
vs. Ambient Temperature. Derating
Based on TJ Max = 110°C.
50
f > 1000 Hz
40
f > 300 Hz
30
f > 100 Hz
20
10
0
50
100
150
200
250
300
IPEAK – PEAK FORWARD CURRENT – mA
Figure 13. Maximum Average Current
vs. Peak Forward Current.
1.0
0.9
NORMALIZED INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100° 90° 80° 70° 60° 50° 40° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
ANGULAR DISPLACEMENT – DEGREES
Figure 14. Spatial Radiation Pattern for 40° HLMP-D115 Lamp.
1.0
0.9
NORMALIZED INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100° 90° 80° 70° 60° 50° 40° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
ANGULAR DISPLACEMENT – DEGREES
Figure 15. Spatial Radiation Pattern for 25° HLMP-D120 Lamp.
1.0
0.9
NORMALIZED INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100° 90° 80° 70° 60° 50° 40° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
ANGULAR DISPLACEMENT – DEGREES
Figure 16. Spatial Radiation Pattern for 55° HLMP-J100-J150 Lamps.
1-55
Similar pages