HP HLMP-S501-D0BDG 2 mm x 5 mm rectangular led lamp Datasheet

H
2 mm x 5 mm Rectangular
LED Lamps
Technical Data
Features
HLMP-S100
HLMP-S20X Series
HLMP-S30X Series
HLMP-S40X Series
HLMP-S50X Series
HLMP-S600
Package Dimensions
• Rectangular Light Emitting
Surface
• Excellent for Flush
Mounting on Panels
• Choice of Five Bright Colors
• Long Life: Solid State
Reliability
• Excellent Uniformity of
Light Output
Description
The HLMP-S100, -S200, -S300,
-S400, -S500, S600 are epoxy
encapsulated lamps in
rectangular packages which are
easily stacked in arrays or used
for discrete front panel
indicators. Contrast and light
uniformity are enhanced by a
special epoxy diffusion and
tinting process.
The HLMP-S100 uses double
heterojunction (DH) absorbing
substrate (AS) aluminum gallium
arsenide (AlGaAs) LEDs to
produce outstanding light output
5964-9379E
1-153
Electrical/Optical Characteristics at TA = 25°C
Sym.
Iv
2θ1/2
Description
Luminous
Intensity
Included Angle
Between Half
Luminous
Intensity Points
λPEAK Peak Wavelength
Device HLMPAlGaAs Red
S100
High Efficiency Red
S200
S201
Orange
S400
S401
Yellow
S300
S301
Green
S500
S501
Emerald Green
S600[4]
Min. Typ.
3.4
7.5
2.1
3.4
3.5
7.5
2.1
3.4
3.5
7.5
1.4
2.2
2.1
4.0
2.6
4.2
4.0
8.0
1.0
3.0
Max.
Units
mcd
IF = 20 mA
IF = 20 mA
See Note 1
All
110
Deg.
AlGaAs Red
High Efficiency Red
Orange
Yellow
Green
Emerald Green
645
635
600
583
565
558
nm
Measurement at
Peak
See Note 2
Time const, e-t/τs
λd
Dominant
Wavelength
AlGaAs Red
High Efficiency Red
Orange
Yellow
Green
Emerald Green
637
626
602
585
569
560
nm
τs
Speed of
Response
AlGaAs Red
High Efficiency Red
Orange
Yellow
Green
Emerald Green
30
90
280
90
500
3100
ns
C
Capacitance
AlGaAs Red
High Efficiency Red
Orange
Yellow
Green
Emerald Green
30
11
4
15
18
35
pF
All
260
°C/W
RθJ-PIN Thermal
Resistance
VF
Forward Voltage
AlGaAs Red
HER/Orange
Yellow
Green/Emerald
Green
1.6
1.5
1.5
1.5
VR
Reverse Breakdown Voltage
All
5.0
1-154
Test Conditions
1.8
1.9
2.1
2.2
2.2
2.6
2.6
3.0
VF = 0; f = 1 MHz
Junction to Cathode
Lead at Seating
Plane
V
IF = 20 mA
V
IR = 100 µA
Electrical/Optical Characteristics at TA = 25°C (cont’d)
Sym.
ηV
Description
Luminous
Efficacy
Device HLMP-
Min. Typ.
AlGaAs Red
High Efficiency Red
Orange
Yellow
Green
Emerald Green
Max.
Units
80
145
380
500
595
656
lumens/
watt
Test Conditions
See Note 3
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines
the color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas
and ηv is the luminous efficacy in lumens/watt.
4. Please refer to Application Note 1061 for information comparing standard green and emerald green light output degradation.
Absolute Maximum Ratings at TA = 25°C
Yellow
Green/
Emerald
Green
Units
90
60
90
mA
20
25
20
25
mA
30
30
20
30
mA
AlGaAs
Red
High Efficiency
Red/Orange
Peak Forward Current
300
Average Forward Current[1]
Parameter
[2]
DC Current
Transient Forward Current[3]
(10 µsec Pulse)
500
LED Junction Temperature
110
Operating Temperature Range
-20 to +100
Storage Temperature Range
-55 to +100
mA
110
110
-55 to +100
-55 to +100
Lead Soldering Temperature
[1.6 mm (0.063 in.) below
seating plane]
110
°C
-20 to +100
°C
-55 to +100
260°C for 5 seconds
Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. For AlGaAs Red, Red, Orange, and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at
0.34 mA/°C.
3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wire bond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
1.0
ORANGE
RELATIVE INTENSITY
EMERALD GREEN
TA = 25° C
AlGaAs RED
HIGH
PERFORMANCE
GREEN
HIGH EFFICIENCY RED
0.5
YELLOW
0
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative Intensity vs. Wavelength.
1-155
Figure 2. Forward Current vs.
Forward Voltage Characteristics. VF
(300 mA) for AlGaAs Red = 2.6 Volts
Typical.
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 5. Maximum Tolerable Peak Current vs. Peak Duration.
(IPEAK MAX Determined from Temperature Derated IDC MAX).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
1-156
Figure 4. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. LED Peak Current. ηv (300 mA) for
AlGaAs Red = 0.7.
Similar pages