HP HLMP-WL02 High intensity alingap led lamp Datasheet

High Intensity AlInGaP
LED Lamps
SunPower Series
HLMP-WLxx
HLMP-NL06
HLMP-WHxx
HLMP-NH04
HLMP-WGxx
HLMP-NG07
Technical Data
Features
Description
• T-1 (3 mm) and T-1 3 /4
(5 mm) General Purpose
LED Lamps
• AlInGaP SunPower Intensity
• High Light Output
• Clear and Tinted Diffused
Lens Options
• Narrow and Wide Viewing
Angles
• Amber, Red-Orange, and Red
• Available on Tape and Reel
This family of 3 mm and 5 mm
LED lamps is specially designed
for applications requiring higher
levels of intensity than is
achieved with a standard lamp.
The 5 mm lamp is available with
15, 30, and 65 degree viewing
angle options. The 3 mm lamp is
available with a 60 degree
viewing angle.
Applications
• General Purpose
• Consumer Goods
• Indicator Lights
Device Selection Guides
T-1 3/4 (5 mm) Lamp
Color
Part Number
Amber
HLMP-WL12
Amber
HLMP-WL27
Amber
HLMP-WL02
Red Orange
HLMP-WH12
Red Orange
HLMP-WH27
Red Orange
HLMP-WH02
Red
HLMP-WG12
Red
HLMP-WG27
Red
HLMP-WG02
Package
Diff.
Tint
T-1 (3 mm) Lamp
Color
Part Number
Amber
HLMP-NL06
Red Orange
HLMP-NH04
Red
HLMP-NG07
Package
Diff.
Tint
X
X
X
X
X
X
Luminous Intensity
Min. mcd, If @ 20 mA
450
205
35
270
155
35
270
155
26
Viewing Angle
2θ 1/2 (Degrees)
15
30
65
15
30
65
15
30
65
Luminous Intensity
Min. mcd, If @ 20 mA
96.2
90.2
90.2
Viewing Angle
2θ 1/2 (Degrees)
60
60
60
2
Technical Data
Typical
Viewing
Angle, 2θ1/2
(Deg.)[2]
15
30
65
Amber
(λd = 590 nm)[1]
Minimum
Luminous
Part
Intensity
No.
Iv (mcd)[3,4],
HLMP@ 20 mA
WL12
450
WL27
205
WL02
35
60
NL06
96.2
Red-Orange
(λd = 615 nm)[1]
Minimum
Luminous
Part
Intensity
No.
Iv (mcd)[3,4],
HLMP@ 20 mA
WH12
270
WH27
155
WH02
35
NH04
90.2
Red
(λd = 626 nm)[1]
Minimum
Luminous
Part
Intensity
No.
Iv (mcd)[3,4],
HLMP@ 20 mA
WG12
270
WG27
155
WG02
26
NG07
90.2
Package
Drawing/
Nominal
Diameter
A/5 mm
A/5 mm
A/5 mm
Epoxy
clear
clear
tinted
diffused[5]
clear
B/3 mm
Notes:
1. Dominant Wavelength, λd, is derived from the CIE Chromaticity Diagram, and represents the color of the lamp.
2. Θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
3. The luminous intensity is measured on the mechanical axis of the lamp package.
4. The optical axis is closely aligned with the package mechanical axis.
5. Tinting of amber lamps is yellow, red-orange lamps are tinted a reddish orange, and red lamps are tinted red.
Package Dimensions
B
A
3.80 ± 0.30
3.10 ± 0.20
5.00 ± 0.20
(0.197 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008
3.35 ± 0.30
1.14 ± 0.20
(0.045 ± 0.008)
5.70 ± 0.5
2.00
0.8 MAX.
(MENISCUS)
2.35 (0.093)
MAX.
31.60
(1.244) MIN.
0.65 MAX.
0.70 (0.028)
MAX.
23.0 MIN.
CATHODE
LEAD
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
FLAT
2.54 ± 0.38
(0.100 ± 0.015)
1.00 MIN.
(0.039)
0.44 ± 0.2
1.0 MIN.
0.50 ± 0.10 SQ. TYP.
(0.020 ± 0.004)
3.60
2.54 ± 0.3
0.4
+ 0.1
–0
3
Absolute Maximum Ratings at TA = 25°C
Parameter
DC Forward Current
Peak Pulsed Forward Current [3,4]
Average Forward Current
Reverse Voltage (I R = 100 µA)
LED Junction Temperature
Operating Temperature
Storage Temperature
Dip/Drag Solder Temperature
Wave Solder Temperature
5 mm
3 mm
[1,3,4]
50 mA
30 mA[2,3,4]
70 mA
50 mA
30 mA
30 mA
5V
5V
130°C
110°C
-40°C to +100°C
-40°C to +80°C
-40°C to +120°C
-40°C to +85°C
260°C for 5 seconds
245°C for 3 seconds
[1.59 mm (0.060 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. Derate linearly as shown in Figure 5.
3. For long term performance with minimal light output degradation, drive currents between 10 and 30 mA are recommended.
4. Please contact your Agilent sales representative about operating currents below 10 mA.
Electrical/Optical Characteristics at TA = 25°C
Parameter
Forward Voltage
Amber (λd = 590 nm)
Red-Orange (λd = 615 nm)
Red (λ d = 626 nm)
Reverse Voltage
Peak Wavelength
Amber
Red-Orange
Red
Spectral Halfwidth
Symbol
Min.
Typ.
5
2.02
1.94
1.90
20
VF
VR
Max.
Units
2.4
V
V
∆λ1/2
592
621
635
17
nm
Speed of Response
τs
20
ns
Capacitance
Thermal Resistance
C
RΘJ-PIN
40
240
pF
°C/W
Luminous Efficacy[5]
Amber
Red-Orange
Red
ηv
500
235
155
lm/W
λPEAK
nm
Test Conditions
I F = 20 mA
I R = 100 µA
Peak of Wavelength of
Spectral Distribution
at IF = 20 mA
Wavelength Width at
Spectral Distribution
1/ 2 Power point at
I F = 20 mA
Exponential Time
Constant, e-t/τs
VF = 0, f = 1 MHz
LED Junction-to-Cathode
Lead
Emitted Luminous
Power/Emitted Radiant
Power
Note:
1. The radiant intensity, Ie, in watts per steridian, may be found from the equation Ie = Iv /ηv, where I v is the luminous intensity in
candelas and ηv is the luminous efficacy in lumens/watt.
4
1.0
70
RED-ORANGE
AMBER
AMBER
CURRENT – mA
RELATIVE INTENSITY
60
RED
0.5
50
40
30
RED
20
10
0
550
600
650
0
1.0
700
WAVELENGTH – nm
1.5
2.0
2.5
VF – FORWARD VOLTAGE – V
Figure 1. Relative Intensity vs. Peak Wavelength.
Figure 2. Forward Current vs.
Forward Voltage.
IF – FORWARD CURRENT – mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
3.0
2.5
2.0
1.5
1.0
0.5
0
0
20
40
60
50
40
RθJA = 585° C/W
30
RθJA = 780° C/W
20
10
0
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – °C
Figure 3. Relative Luminous Intensity
vs. Forward Current.
Figure 4. Maximum Forward Current
vs. Ambient Temperature for 5 mm
Lamps. Derating Based on T JMAX =
130°C.
IF – FORWARD CURRENT – mA
IF – DC FORWARD CURRENT – mA
30
RθJA = 500° C/W
20
RθJA = 660° C/W
10
0
0 10 20 30 40 50 60 70 80 90
TA – AMBIENT TEMPERATURE – °C
Figure 5. Maximum Forward Current
vs. Ambient Temperature for 3 mm
Lamps. Derating Based on T JMAX =
110 °C.
3.0
5
1.0
RELATIVE INTENSITY – %
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-25
-20
-15
-10
-5
0
5
10
15
20
25
20
25
80
100
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Representative Spatial Radiation Pattern for 15°
Viewing Angle T-1 3/4 (5 mm) Lamps (HLMP-WX12).
1.0
RELATIVE INTENSITY – %
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-25
-20
-15
-10
-5
0
5
10
15
ANGULAR DISPLACEMENT – DEGREES
Figure 7. Representative Spatial Radiation Pattern for 30°
Viewing Angle T-1 3/4 (5 mm) Lamps (HLMP-WX27).
NORMALIZED INTENSITY – %
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-100
-80
-60
-40
-20
0
20
40
ANGULAR DISPLACEMENT – DEGREES
Figure 8. Representative Spatial Radiation
Pattern for 65° Viewing Angle Tinted/Diffused
T-1 3/4 (5 mm) Lamps (HLMP-WX02).
60
6
NORMALIZED INTENSITY – %
100
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
ANGULAR DISPLACEMENT – DEGREES
Figure 9. Representative Spatial Radiation
Pattern for 60° Viewing Angle T-1 (3 mm) Lamps
(HLMP-NL06/NH04/NG07).
www.semiconductor.agilent.com
Data subject to change.
Copyright © 1999 Agilent Technologies, Inc.
Obsoletes 5965-9780E (7/97)
5968-0947E (11/99)
Similar pages