Hittite HMC194MS8 Gaas mmic spdt switch dc - 3 ghz Datasheet

HMC194MS8 / 194MS8E
v06.0608
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Typical Applications
Features
The HMC194MS8 /HMC194MS8E is ideal for:
Ultra Small Package: MSOP8
• Cellular/PCS Base Stations
High Isolation: 50 dB
• Portable Wireless
Positive Control: 0/+3V to 0/+7V
• MMDS & WirelessLAN
Functional Diagram
General Description
10
SWITCHES - SMT
The HMC194MS8 & HMC194MS8E are low-cost
SPDT switches in 8-lead MSOP packages for use in
applications which require high isolation between two
RF paths. The devices can control signals from DC to
3 GHz and have been optimized to provide extremely
high isolation with minimal insertion loss in medium
and low power applications. On chip circuitry allows
positive voltage control operation at very low DC currents with control inputs compatible with CMOS and
most TTL logic families. RF1 and RF2 are reflective
opens when “OFF”.
Electrical Specifi cations, TA = +25° C, Vctl = 0/+5 Vdc, 50 Ohm System
Parameter
Frequency
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
Insertion Loss
RF1 / RF2
RF1 / RF2
Isolation
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
48 / 50
40 / 42
31
24
Typ.
Max.
Units
0.7
0.8
0.8
0.9
1.0
1.1
dB
dB
dB
52 / 54
44 / 46
35
28
dB
dB
dB
dB
24
22
dB
dB
Return Loss
DC - 2.0 GHz
DC - 2.5 GHz
Input Power for 1 dB Compression
0/+5V Control
0.5 - 3.0 GHz
24
28
dBm
0.5 - 3.0 GHz
49
53
dBm
10
24
ns
ns
Input Third Order Intercept
(Two-tone Input Power = +7 dBm Each Tone)
0/+5V Control
Switching Characteristics
DC - 3.0 GHz
tRISE, tFALL (10/90% RF)
tON , tOFF (50% CTL to 10/90% RF)
10 - 26
Min.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC194MS8/ HMC194MS8
v06.0608
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Isolation
0
0
-0.5
-10
ISOLATION (dB)
-1
-1.5
-2
RF1
RF2
-20
-30
-40
-50
-2.5
-60
-3
-70
0
1
2
0
3
1
FREQUENCY (GHz)
POWER FOR 0.1dB & 1dB COMPRESSION
0
RETURN LOSS (dB)
3
10
Input 0.1 and 1.0 dB
Compression vs. Control Voltage
Return Loss
S11
S22
-10
-20
-30
-40
0
2
FREQUENCY (GHz)
1
2
32
28
24
20
16
12
P0.1dB at 900 MHz
P1dB at 900 MHz
P0.1dB at 1900 MHz
P1dB at 1900 MHz
P0.1dB at 3000 MHz
P1dB at 3000 MHz
8
4
0
3
5
3
7
Control Input (V)
SWITCHES - SMT
INSERTION LOSS (dB)
Insertion Loss
FREQUENCY (GHz)
Input Third Order
Intercept Point vs. Control Voltage
Truth Table
*Control Input Voltage Tolerances are ± 0.2 Vdc.
THIRD ORDER INTERCEPT (dBm)
60
Control Input*
50
40
30
900 MHz
1900 MHz
3000 MHz
20
10
A
(Vdc)
B
(Vdc)
Control Current
Ia
(uA)
Ib
(uA)
Signal Path State
RF to
RF1
RF to
RF2
0
+3
-0.05
+0.05
ON
OFF
+3
0
+0.05
-0.05
OFF
ON
OFF
0
+5
-2
+2
ON
+5
0
+2
-2
OFF
ON
0
+7
-15
+15
ON
OFF
+7
0
+15
-15
OFF
ON
0
3
5
7
Control Input (V)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 27
HMC194MS8/ HMC194MS8
v06.0608
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Absolute Maximum Ratings
+27 dBm
Control Voltage Range (A & B)
-0.2 to +7.5 Vdc
Hot Switch Power Level (Vctl= 0V/+5V)
+24 dBm
Channel Temperature
150 °C
Continuous Pdiss (T= 85 °C)
(derate 5.5 mW/°C above 85 °C)
360 mW
Thermal Resistance
180 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1B
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Note: DC blocking capacitors are required at ports RFC, RF1 and
RF2. Their value will determine the lowest transmission frequency.
Outline Drawing
SWITCHES - SMT
10
RF Input Power (Vctl= 0V/+5V)
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC194MS8
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC194MS8E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H194
XXXX
[2]
H194
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
10 - 28
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC194MS8/ HMC194MS8
v06.0608
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Typical Application Circuit
SWITCHES - SMT
10
Notes:
1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 3 to 7 Volts applied to the CMOS logic gates.
3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.
4. Highest RF signal power capability is achieved with Control set to 0/+7V.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 29
HMC194MS8/ HMC194MS8
v06.0608
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Evaluation Circuit Board
SWITCHES - SMT
10
List of Materials for Evaluation PCB 105143 [1]
Item
Description
J1 - J3
PC Mount SMA RF Connector
J4 - J6
DC Pin
C1 - C3
100 pF capacitor, 0402 Pkg.
R1, R2
100 Ω resistor, 0402 Pkg.
U1
HMC194MS8 / HMC194MS8E
SPDT Switch
PCB [2]
107821 Evaluation PCB
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should
have 50 ohm impedance and the package ground
leads should be connected directly to the ground
plane similar to that shown above. The evaluation circuit board shown above is available from
Hittite Microwave Corporation upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
10 - 30
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC194MS8/ HMC194MS8
v06.0608
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Notes
SWITCHES - SMT
10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 31
Similar pages