Hittite HMC230MS8 4 db lsb gaas mmic 3-bit digital attenuator, 0.75 - 2.0 ghz Datasheet

HMC230MS8 / 230MS8E
v02.0505
ATTENUATORS - SMT
6
4 dB LSB GaAs MMIC 3-BIT DIGITAL
ATTENUATOR, 0.75 - 2.0 GHz
Typical Applications
Features
The HMC230MS8 / HMC230MS8E is ideal for:
4 dB LSB Steps to 28 dB
• Cellular
Single Positive Control Per Bit
• PCS, ISM, MMDS
+/- 0.5 dB Typical Bit Error
• WLL Handset
• Base Station Infrastructure
Pin - For - Pin Replacement to
AA100-59 Digital Attenuator
Functional Diagram
General Description
The HMC230MS8 & HMC230MS8E are broadband 3
- bit positive control GaAs IC digital attenuators in 8
lead MSOP surface mount plastic packages. Covering 0.75 to 2 GHz, the insertion loss is typically less
than 2 dB. The attenuator bit values are 4 (LSB), 8,
and 16 dB for a total attenuation of 28 dB. Accuracy
is excellent at ± 0.5 dB typical with an IIP3 of up to
+48 dBm. Three bit control voltage inputs, toggled
between 0 and +3 to +5 volts, are used to select each
attenuation state at less than 50 uA each. A single
Vdd bias of +3 to +5 volts applied through an external
5K Ohm resistor is required.
Electrical Specifications,
TA = +25° C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated)
Parameter
Typical
Max.
Units
Insertion Loss
0.75 - 1.7 GHz
1.7 - 2.0 GHz
Frequency
Min.
1.6
1.8
1.8
2.1
dB
dB
Attenuation Range
0.75 - 2.0 GHz
28
dB
Return Loss (RF1 & RF2, All Atten. States)
0.75 - 1.7 GHz
1.7 - 2.0 GHz
10
13
13
16
dB
dB
0.75 - 1.4 GHz
0.75 - 1.4 GHz
1.40 - 2.0 GHz
± 0.3 + 3% of Atten. Setting Max
± 0.4 + 6% of Atten. Setting Max
± 0.3 + 3% of Atten. Setting Max
dB
dB
dB
Attenuation Accuracy: (Reference to Insertion Loss)
4, 8, 12, 16, 20 dB States
24, 28 dB States
All Attenuation States
Input Power for 0.1 dB Compression
5V
3V
0.75 - 2.0 GHz
20
19
dBm
dBm
Input Third Order Intercept
(Two-Tone Input Power = 0 dBm Each)
5V
3V
0.75 - 2.0 GHz
46
45
dBm
dBm
0.75 - 2.0 GHz
560
600
ns
ns
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
6-8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC230MS8 / 230MS8E
v02.0505
4 dB LSB GaAs IC 3-BIT DIGITAL
ATTENUATOR, 0.75 - 2.0 GHz
Return Loss RF1, RF2
Insertion Loss
(Only Major States are Shown)
-0.5
-5
-1
-1.5
-2
16, 28 dB
-10
4 dB
-15
-20
-2.5
8 dB
-3
0.75
1
1.25
1.5
1.75
-25
0.75
2
1
FREQUENCY (GHz)
1.25
1.5
1.75
2
FREQUENCY (GHz)
Normalized Attenuation
Bit Error vs. Attenuation State
0
3
-5
2
-10
BIT ERROR (dB)
NORMALIZED INSERTION LOSS (dB)
(Only Major States are Shown)
-15
-20
4 dB
8 dB
16 dB
28 dB
-25
1
0
0.9 GHz
1.9 GHz
-1
-30
-35
0.75
-2
1
1.25
1.5
1.75
2
4
8
12
FREQUENCY (GHz)
16
20
Relative Phase vs. Frequency
(Only Major States are Shown)
(Only Major States are Shown)
28
60
4
RELATIVE PHASE (deg.)
3
2
1
0
-1
4 dB
8 dB
16 dB
28 dB
-2
40
20
0
-20
4 dB
8 dB
16 dB
28 dB
-40
-3
-4
0.75
24
ATTENUATION STATE (dB)
Bit Error vs. Frequency
BIT ERROR (dB)
ATTENUATORS - SMT
+25C
-40C
+85C
RETURN LOSS (dB)
INSERTION LOSS (dB)
6
0
0
1
1.25
1.5
FREQUENCY (GHz)
1.75
2
-60
0.75
1
1.25
1.5
1.75
2
FREQUENCY (GHz)
Note: All Data Typical Over Voltage (+3V to +5V) & Temperature (-40 to +85 deg C).
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6-9
HMC230MS8 / 230MS8E
v02.0505
4 dB LSB GaAs IC 3-BIT DIGITAL
ATTENUATOR, 0.75 - 2.0 GHz
Control & Bias Voltages
ATTENUATORS - SMT
6
State
Bias Condition
Low
0 to +0.2Vdc @ 20 uA Max
High
Vdd ±0.2V @ 50 uA Typ
Truth Table
Control Voltage Input
Note: Vdd = +3V to +5V ± 0.2V
Attenuation Setting
RF1 - RF2
V1
16 dB
V2
4 dB
V3
8 dB
High
High
High
Reference I.L.
High
Low
High
4 dB
High
High
Low
8 dB
Low
High
High
16 dB
Low
Low
Low
28 dB
Max. Atten.
Any combination of the above states will provide an attenuation
approximately equal to the sum of the bits selected.
Application Circuit
DC blocking capacitors C1 & C2 are required on RF1 & RF2. Choose
C1 = C2 = 100 ~ 300 pF to allow lowest customer specific frequency to
pass with minimal loss. R1 = 5K Ohm is required to supply voltage to
the circuit through either PIN 1 or PIN 5.
6 - 10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC230MS8 / 230MS8E
v02.0505
4 dB LSB GaAs IC 3-BIT DIGITAL
ATTENUATOR, 0.75 - 2.0 GHz
Absolute Maximum Ratings
Vdd to +0.5 Vdc
Bias Voltage (Vdd)
+8.0 Vdc
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
RF Input Power (0.75 - 2 GHz)
+26 dBm
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
6
ATTENUATORS - SMT
Control Voltage (V1, V2, V3)
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC230MS8
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC230MS8E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H230
XXXX
[2]
H230
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 11
HMC230MS8 / 230MS8E
v02.0505
4 dB LSB GaAs IC 3-BIT DIGITAL
ATTENUATOR, 0.75 - 2.0 GHz
Evaluation Circuit Board
ATTENUATORS - SMT
6
*R2 = R3 = R4 = 100 Ohm.
These Resistors are optional and may
be used to enhance decoupling of the
RF path from the control inputs.
List of Materials for Evaluation PCB 103155
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J6
DC Pin
R1
5k Ohm Resistor, 0402 Chip
R2, R3, R4
100 Ohm Resistor, 0402 Chip
C1, C2
0402 Chip Capacitor, Select for Lowest Frequency
of Operation
U1
HMC230MS8 / HMC230MS8E Digital Attenuator
PCB [2]
103153 Evaluation PCB 1.25” x 1.5”
[1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package ground leads should be connected directly to
the ground plane similar to that shown. A sufficient
number of VIA holes should be used to connect the
top and bottom ground planes. The evaluation circuit board as shown is available from Hittite Microwave Corporation upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
6 - 12
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC230MS8 / 230MS8E
v02.0505
4 dB LSB GaAs IC 3-BIT DIGITAL
ATTENUATOR, 0.75 - 2.0 GHz
Notes:
ATTENUATORS - SMT
6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 13
Similar pages