HITTITE HMC273MS10G_08

HMC273MS10G / 273MS10GE
v04.0907
ATTENUATORS - SMT
5
1 dB LSB GaAs MMIC 5-BIT DIGITAL
ATTENUATOR, 0.7 - 3.8 GHz
Typical Applications
Features
The HMC273MS10G(E) is ideal for:
RoHs Compliant Product
• Cellular; UMTS/3G Infrastructure
1 dB LSB Steps to 31 dB
• ISM, MMDS, WLAN, WiMAX
Single Positive Control Per BIT
• Microwave Radio & VSAT
±0.2 dB Typical Bit Error
• Test Equipment and Sensors
Miniature MSOP 10 Package: 14.8mm2
Included in the HMC-DK004 Designer’s Kit
Functional Diagram
General Description
The HMC273MS10G(E) is a general purpose
broadband 5-Bit positive control GaAs IC digital
attenuator in a 10 lead MSOP plastic package.
Covering 0.7 to 3.8 GHz, the insertion loss is typically
less than 2.5 dB. The attenuator bit values are
1 (LSB), 2, 4, 8, and 16 dB for a total attenuation
of 31 dB. Accuracy is excellent at ±0.2 dB typical
with an IIP3 of up to +48 dBm. Five bit control voltage inputs, toggled between 0 and +3 to +5 volts, are
used to select each attenuation state. A single Vdd
bias of +3 to +5 volts applied through an external
5K Ohm resistor is required.
Electrical Specifi cations,
TA = +25° C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated)
Parameter
Insertion Loss
Attenuation Range
0.7 - 3.8 GHz
Return Loss (RF1 & RF2, All Atten. States)
0.7 - 1.4 GHz
1.4 - 2.7 GHz
2.7 - 3.8 GHz
Attenuation Accuracy: (Referenced to Insertion Loss)
All Attenuation States
All Attenuation States
All Attenuation States
All Attenuation States
Min.
Typical
Max.
Units
1.8
2.3
2.8
3.5
3.9
2.4
2.9
3.4
4.2
4.4
dB
dB
dB
dB
dB
31
dB
17
20
14
dB
dB
dB
0.7 - 1.4 GHz
1.4 - 2.2 GHz
2.2 - 2.7 GHz
2.7 - 3.8 GHz
± (0.30 + 3% of Atten. Setting) Max
± (0.30 + 4% of Atten. Setting) Max
± (0.40 + 5% of Atten. Setting) Max
± (0.50 + 5% of Atten. Setting) Max
dB
dB
dB
dB
11
12
10
Input Power for 0.1 dB Compression
Vdd = 5V
Vdd = 3V
0.7 - 3.8 GHz
27
22
dBm
dBm
Input Third Order Intercept Point
(Two-tone Input Power = 0 dBm Each Tone)
Vdd = 5V
Vdd = 3V
0.7 - 3.8 GHz
48
46
dBm
dBm
0.7 - 3.8 GHz
560
600
ns
ns
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
5 - 22
Frequency
0.7 - 1.4 GHz
1.4 - 2.3 GHz
2.3 - 2.7 GHz
2.7 - 3.7 GHz
3.7 - 3.8 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC273MS10G / 273MS10GE
v04.0907
1 dB LSB GaAs MMIC 5-BIT DIGITAL
ATTENUATOR, 0.7 - 3.8 GHz
5
Return Loss RF1, RF2
(Only Major States are Shown)
Insertion Loss vs. Temperature
-5
+25 C
+85 C
-40 C
-1
-2
-3
-4
-5
0.5
IL 16 dB 1 dB 8 dB
-10
-15
-20
31 dB
-25
1
1.5
2
2.5
3
3.5
4 dB
-30
0.5
4
1
1.5
FREQUENCY (GHz)
2
2.5
2 dB
3
3.5
4
FREQUENCY (GHz)
Normalized Attenuation
(Only Major States are Shown)
Bit Error vs. Attenuation State
1
0.9 GHz
2.4 GHz
3.5 GHz
-5
0.5
-10
BIT ERROR (dB)
NORMALIZED ATTENUATION (dB)
0
-15
-20
-25
0
1.9 GHz
-0.5
-30
-35
0.5
-1
1
1.5
2
2.5
3
3.5
0
4
4
FREQUENCY (GHz)
8
12
16
20
24
28
32
ATTENUATION STATE (dB)
Bit Error vs. Frequency
Relative Phase vs. Frequency
(Only Major States are Shown)
(Only Major States are Shown)
100
2
1.5
80
31 dB
RELATIVE PHASE (deg)
BIT ERROR (dB)
ATTENUATORS - SMT
0
RETURN LOSS (dB)
INSERTION LOSS (dB)
0
2 dB
1
0.5
0
-0.5
1,4,8 dB
60
31 dB
40
16 dB
20
0
1,2,4,8 dB
-20
16 dB
-1
0.5
1
1.5
2
2.5
3
3.5
4
-40
0.5
1
1.5
FREQUENCY (GHz)
2
2.5
3
3.5
4
FREQUENCY (GHz)
Note: All Data Typical Over Voltage (+3V to +5V)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 23
HMC273MS10G / 273MS10GE
v04.0907
1 dB LSB GaAs MMIC 5-BIT DIGITAL
ATTENUATOR, 0.7 - 3.8 GHz
5
Worst Case Step Error
Between Successive Attenuation States
Truth Table
STEP ERROR (dB)
ATTENUATORS - SMT
1.2
Control Voltage Input
Attenuation
Setting
RF1 - RF2
0.8
V1
16 dB
V2
8 dB
V3
4 dB
V4
2 dB
V5
1 dB
0.4
High
High
High
High
High
Reference
I.L.
0
High
High
High
High
Low
1 dB
High
High
High
Low
High
2 dB
High
High
Low
High
High
4 dB
High
Low
High
High
High
8 dB
Low
High
High
High
High
16 dB
Low
Low
Low
Low
Low
31 dB
Max. Atten.
-0.4
-0.8
-1.2
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
Any combination of the above states will provide an attenuation
approximately equal to the sum of the bits selected.
Control Voltages
State
Bias Condition
Low
0 to +0.2 V @ 20 uA Max
High
Vdd ± 0.2V @ 100 uA Max
Note: Vdd = +3V to 5V ± 0.2V
Application Circuit
DC blocking capacitors C1 & C2 are required on RF1 & RF2. Choose C1 = C2 = 100 ~ 300 pF to allow lowest customer specific
frequency to pass with minimal loss. R1 = 5K Ohm is required to supply voltage to the circuit through either PIN 6 or PIN 10.
5 - 24
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC273MS10G / 273MS10GE
v04.0907
1 dB LSB GaAs MMIC 5-BIT DIGITAL
ATTENUATOR, 0.7 - 3.8 GHz
Control Voltage (V1 - V5)
Vdd + 0.5 Vdc
Bias Voltage (Vdd)
+8.0 Vdc
Channel Temperature
150 °C
Continuous Pdiss (T=85°C)
(derate 6mW/°C above 85°C)
0.4 W
Thermal Resistance
163 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
RF Input Power (0.7 - 3.7 GHz)
+30 dBm
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
ATTENUATORS - SMT
5
Absolute Maximum Ratings
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC273MS10G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC273MS10GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H273
XXXX
[2]
H273
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 25
HMC273MS10G / 273MS10GE
v04.0907
1 dB LSB GaAs MMIC 5-BIT DIGITAL
ATTENUATOR, 0.7 - 3.8 GHz
Evaluation Circuit Board
ATTENUATORS - SMT
5
* R2 - R6 = 100 Ohm.
These resistors are optional
and may be used to enhance
decoupling of the RF path
from the control inputs.
List of Materials for Evaluation PCB 103393 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J6
DC Pin
R1
5k Ohm Resistor, 0402 Chip
R2, R3, R4
100 Ohm Resistor, 0402 Chip
C1, C2
0402 Chip Capacitor, Select for Lowest
Frequency of Operation
U1
HMC273MS10G / HMC273MS10GE
Digital Attenuator
PCB [2]
103391 Evaluation PCB 1.5” x 1.5”
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed ground paddle
should be connected directly to the ground plane
similar to that shown below. A sufficient number
of via holes should be used to connect the top
and bottom ground planes. The evaluation circuit
board as shown is available from Hittite Microwave
Corporation upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
5 - 26
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC273MS10G / 273MS10GE
v04.0907
1 dB LSB GaAs MMIC 5-BIT DIGITAL
ATTENUATOR, 0.7 - 3.8 GHz
5
ATTENUATORS - SMT
Notes:
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 27