Hittite HMC490LP5 Gaas phemt mmic low noise high ip3 amplifier, 12 - 16 ghz Datasheet

HMC490LP5 / 490LP5E
v03.1109
LOW NOISE AMPLIFIERS - SMT
8
GaAs PHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
Typical Applications
Features
The HMC490LP5(E) is ideal for:
Noise Figure: 2.5 dB
• Point-to-Point Radios
P1dB Output Power: +25 dBm
• Point-to-Multi-Point Radios
Gain: 23 dB
• VSAT
Output IP3: +34 dBm
3
+5V Supply
• Military EW, ECM & C I
50 Ohm Matched Input/Output
32 Lead 5x5mm SMT Package: 25mm2
Functional Diagram
General Description
The HMC490LP5(E) is a high dynamic range GaAs
PHEMT MMIC Low Noise Amplifier which operates
between 12 and 16 GHz. The HMC490LP5(E) provides
23 dB of gain, 2.5 dB noise figure and an output IP3
of +34 dBm from a +5V supply voltage. This versatile
amplifier combines excellent, stable +25 dBm P1dB
output power with very low noise figure making it ideal
for receive and transmit applications. The amplifier is
packaged in a leadless 5x5 mm QFN surface mount
package.
Electrical Specifi cations, TA = +25° C, Vdd = 5V, Idd = 200 mA*
Parameter
Min.
Frequency Range
Gain
Typ.
Max.
12 - 16
20
GHz
23
dB
Gain Variation Over Temperature
0.03
0.04
dB/ °C
Noise Figure
2.5
3.5
dB
Input Return Loss
8
Output Return Loss
8
dB
25
dBm
27
dBm
Output Third Order Intercept (IP3)
34
dBm
Supply Current (Idd)(Vdd = 5V, Vgg = -0.8V Typ.)
200
mA
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
22
* Adjust Vgg between -2 to 0V to achieve Idd = 200 mA typical.
8 - 130
Units
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
dB
HMC490LP5 / 490LP5E
v03.1109
GaAs PHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
Broadband Gain & Return Loss
8
Gain vs. Temperature
30
28
26
24
S21
S11
S22
10
GAIN (dB)
RESPONSE (dB)
20
0
-10
22
20
18
+25 C
16
+85 C
14
-40 C
12
10
-20
8
8
10
12
14
16
18
20
10
11
12
FREQUENCY (GHz)
Input Return Loss vs. Temperature
14
15
16
17
18
Output Return Loss vs. Temperature
0
0
-2
+25 C
+85 C
-40 C
-4
+25 C
+85 C
-40 C
-4
RETURN LOSS (dB)
RETURN LOSS (dB)
13
FREQUENCY (GHz)
-6
-8
-10
-8
-12
LOW NOISE AMPLIFIERS - SMT
30
-16
-12
-20
-14
10
11
12
13
14
15
16
17
18
10
11
12
Noise Figure vs. Temperature
14
15
16
17
18
16
17
18
Output IP3 vs. Temperature
40
10
35
8
30
+25 C
+85 C
-40 C
6
IP3 (dBm)
NOISE FIGURE (dB)
13
FREQUENCY (GHz)
FREQUENCY (GHz)
4
+25 C
+85 C
-40 C
25
20
2
15
0
10
10
11
12
13
14
15
FREQUENCY (GHz)
16
17
18
10
11
12
13
14
15
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 131
HMC490LP5 / 490LP5E
v03.1109
GaAs PHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
Psat vs. Temperature
32
32
28
28
24
24
20
20
16
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature
+25 C
+85 C
-40 C
12
16
8
4
4
0
+25 C
+85 C
-40 C
12
8
0
10
11
12
13
14
15
16
17
18
10
11
12
FREQUENCY (GHz)
Gain, Noise Figure & OIP3 vs.
Supply Voltage @ 14 GHz, Idd= 200 mA
Pout (dBm), GAIN (dB), PAE (%)
GAIN (dB), IP3 (dBm)
4
32
3
28
2
1
24
0
20
3.5
4
4.5
15
16
17
18
30
Noise Figure
Gain
IP3
14
Power Compression @ 14 GHz
5
40
36
13
FREQUENCY (GHz)
NOISE FIGURE (dB)
LOW NOISE AMPLIFIERS - SMT
8
5
25
20
15
10
Pout (dBm)
Gain (dB)
PAE (%)
5
0
-20
5.5
-15
-10
-5
0
5
10
INPUT POWER (dBm)
Vdd (V)
Gain, Noise Figure & IP3 vs.
Supply Current @ 14 GHz, Vdd= 5V*
Reverse Isolation vs. Temperature
34
5
30
4
0
3
22
2
18
14
100
1
Gain
IP3
125
ISOLATION (dB)
26
NOISE FIGURE (dB)
GAIN (dB), IP3 (dBm)
-10
+25 C
+85 C
-40 C
-20
-30
-40
-50
-60
Noise Figure
150
Idd (mA)
175
0
200
-70
10
11
12
13
14
15
16
FREQUENCY (GHz)
* Idd is controlled by varying Vgg
8 - 132
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
17
18
HMC490LP5 / 490LP5E
v03.1109
GaAs PHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
Typical Supply Current vs. Vdd
Drain Bias Voltage (Vdd1, Vdd2, Vdd3)
+5.5V
Vdd (V)
Idd (mA)
Gate Bias Voltage (Vgg)
-4 to 0V
+3.0
140
RF Input Power (RFIN)(Vdd = +5V)
+10 dBm
+3.5
154
Channel Temperature
175 °C
+4.0
168
Continuous Pdiss (T = 85 °C)
(derate 29 mW/°C above 85 °C)
2.65 W
+4.5
188
+5.0
200
Thermal Resistance
(channel to ground paddle)
34 °C/W
+5.5
208
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Note: Amplifi er will operate over full voltage ranges shown
above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
8
LOW NOISE AMPLIFIERS - SMT
Absolute Maximum Ratings
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC490LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC490LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H490
XXXX
[2]
H490
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 133
HMC490LP5 / 490LP5E
v03.1109
GaAs PHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
LOW NOISE AMPLIFIERS - SMT
8
8 - 134
Pin Descriptions
Pin Number
Function
Description
1, 2, 6 - 12,
14 - 19, 23, 24,
26, 27, 29 - 31
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
3, 5, 20, 22
GND
Package bottom must also
be connected to RF/DC ground.
4
RFIN
This pad is AC coupled
and matched to 50 Ohms.
13
Vgg
Gate control for amplifier. Adjust to achieve Idd of 200 mA.
Please follow “MMIC Amplifier Biasing Procedure”
Application Note. External bypass capacitors of 100 pF and
0.01 μF are required.
21
RFOUT
This pad is AC coupled
and matched to 50 Ohms.
25, 28, 32
Vdd3, 2, 1
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 0.01 μF are required.
Interface Schematic
Application Circuit
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC490LP5 / 490LP5E
v03.1109
GaAs PHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
8
LOW NOISE AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 108402 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J8
DC Pin
C1 - C4
1000 pF Capacitor, 0402 Pkg.
C5 - C8
4.7 μF Capacitor, Tantalum
U1
HMC490LP5 / HMC490LP5E
PCB [2]
108540 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and package bottom should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 135
Similar pages