Hittite HMC511LP5 Mmic vco w/ half frequency output 9.05 - 10.15 ghz Datasheet

HMC511LP5 / 511LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY
OUTPUT 9.05 - 10.15 GHz
Typical Applications
Features
Low noise MMIC VCO w/Half Frequency, for:
• VSAT Radio
Dual Output: Fo = 9.05 - 10.15 GHz
Fo/2 = 4.525 - 5.075 GHz
• Point to Point/Multi-Point Radio
Pout: +13 dBm
• Test Equipment & Industrial Controls
Phase Noise: -115 dBc/Hz @100 kHz Typ.
• Military End-Use
No External Resonator Needed
32 Lead 5x5mm SMT Package: 25mm²
Functional Diagram
The HMC511LP5 & HMC511LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC511LP5 & HMC511LP5E integrate resonators,
negative resistance devices, varactor diodes and
feature a half frequency output. The VCO’s phase
noise performance is excellent over temperature,
shock, and process due to the oscillator’s monolithic
structure. Power output is +13 dBm typical from a +5V
supply. The voltage controlled oscillator is packaged
in a leadless QFN 5x5 mm surface mount package,
and requires no external matching components.
VCOS with Fo/2 OUTPUT - SMT
8
Electrical Specifications, TA = +25° C, Vcc = +5V
Parameter
Frequency Range
Power Output
Min.
Fo
Fo/2
Tune Voltage
Typ.
RFOUT
RFOUT/2
+9
+5
Vtune
2
+16
+11
200
265
Tune Port Leakage Current (Vtune= 13V)
Output Return Loss
1/2
2nd
3rd
Units
GHz
GHz
-115
Supply Current (Icc) (Vcc = +5.0V)
Harmonics/Subharmonics
Max.
9.05 - 10.15
4.525 - 5.075
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT
Pulling (into a 2.0:1 VSWR)
8-1
General Description
dBm
dBm
dBc/Hz
13
V
300
mA
10
µA
2
dB
38
15
30
dBc
dBc
dBc
8
MHz pp
Pushing @ Vtune= 5V
15
MHz/V
Frequency Drift Rate
0.9
MHz/°C
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC511LP5 / 511LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY
OUTPUT 9.05 - 10.15 GHz
Frequency vs. Tuning Voltage, Vcc= +5V
10.6
10.6
10.2
10.2
OUTPUT FREQUENCY (GHz)
9.8
9.4
9
Vcc=4.75V
Vcc=5.0V
Vcc=5.25V
8.6
8.2
7.8
9.8
9.4
9
+25 C
+85 C
-40 C
8.6
8.2
7.8
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
4
TUNING VOLTAGE (VOLTS)
Sensitivity vs. Tuning Voltage, Vcc= +5V
7
8
9
10
11 12
13
20
8
18
OUTPUT POWER (dBm)
600
SENSITIVITY (MHz/V)
6
Output Power
vs. Tuning Voltage, Vcc= +5V
700
500
+25 C
+85 C
-40 C
400
300
200
100
16
14
12
10
8
6
+25 C
+85 C
-40 C
4
2
0
0
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
4
TUNING VOLTAGE (VOLTS)
5
6
7
8
9
10
11 12
13
TUNING VOLTAGE (VOLTS)
SSB Phase Noise vs. Tuning Voltage
SSB Phase Noise @ Vtune = +5V
-10
0
-30
-50
SSB PHASE NOISE (dBc/Hz)
SSB PHASE NOISE (dBc/Hz)
5
TUNING VOLTAGE (VOLTS)
10kHz offset
100kHz offset
-70
-90
-110
-130
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VOLTS)
11
12
13
-20
-40
+25 C
+85 C
-40 C
-60
-80
-100
-120
-140
-160
2
10
3
10
4
10
5
10
VCOS with Fo/2 OUTPUT - SMT
OUTPUT FREQUENCY (GHz)
Frequency vs. Tuning Voltage, T= 25°C
6
10
OFFSET FREQUENCY (Hz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-2
HMC511LP5 / 511LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY
OUTPUT 9.05 - 10.15 GHz
RFOUT/2 Output Power
vs. Tuning Voltage, Vcc= +5V
5.4
14
5.2
12
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
RFOUT/2 Frequency
vs. Tuning Voltage, Vcc= +5V
5
4.8
4.6
4.4
+25 C
+85 C
-40 C
4.2
10
8
6
+25 C
+85 C
-40 C
4
2
4
3.8
0
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
TUNING VOLTAGE (VOLTS)
Absolute Maximum Ratings
VCOS with Fo/2 OUTPUT - SMT
8
8-3
4
5
6
7
8
9
10
11 12
13
TUNING VOLTAGE (VOLTS)
Typical Supply Current vs. Vcc
Vcc
+5.5 Vdc
Vcc (V)
Vtune
0 to +15V
4.75
Icc (mA)
245
Junction Temperature
135 °C
5.0
265
Continuous Pdiss (T=85 °C)
(derate 31.5 mW/C above 85 °C
1.58 W
5.25
285
Thermal Resistance
(junction to ground paddle)
31.6 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Note: VCO will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC511LP5 / 511LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY
OUTPUT 9.05 - 10.15 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC511LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL3
[1]
HMC511LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
[2]
Package Marking [3]
H511
XXXX
H511
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
VCOS with Fo/2 OUTPUT - SMT
8
8-4
HMC511LP5 / 511LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY
OUTPUT 9.05 - 10.15 GHz
Pin Descriptions
VCOS with Fo/2 OUTPUT - SMT
8
8-5
Pin Number
Function
Description
1 - 4, 6 - 10,
13 - 18, 20, 22 28, 30 - 32
N/C
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
12
RFOUT/2
Half frequency output (AC coupled).
19
RFOUT
RF output (AC coupled).
21
Vcc
Supply Voltage, +5V
29
VTUNE
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
5, 11 Paddle
GND
Package bottom has an exposed metal paddle
that must be connected to RF/DC ground.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC511LP5 / 511LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY
OUTPUT 9.05 - 10.15 GHz
Evaluation PCB
List of Materials for Evaluation PCB 110227 [1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
J5
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4
1,000 pF Capacitor, 0402 Pkg.
C5 - C7
2.2 µF Tantalum Capacitor
U1
HMC511LP5(E) VCO
PCB [2]
110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
VCOS with Fo/2 OUTPUT - SMT
8
[2] Circuit Board Material: Arlon 25FR
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-6
Similar pages