Hittite HMC544 Gaas mmic t/r switch, dc - 4 ghz Datasheet

HMC544 / 544E
v00.0206
GaAs MMIC T/R SWITCH,
DC - 4 GHz
Typical Applications
Features
The HMC544 / HMC544E is ideal for:
Very Low Insertion Loss: 0.2 dB @ 1.0 GHz
• Cellular/PCS/3G Infrastructure
High Input P1dB: +39 dBm
• Basestations & Repeaters
High Input IP3: +55 dBm
• WLAN, WiMAX and WiBro
Positive Control: 0/+3V to 0/+5V
• Microwave and Fixed Wireless Radios
Compact SOT26 SMT Package
Functional Diagram
General Description
10
SWITCHES - SMT
The HMC544 & HMC544E are low cost SPDT switches in 6-lead SOT26 packages for use in transmitreceive applications which require very low insertion
loss at medium power levels. These devices can
control signals from DC to 4.0 GHz and are especially
suited for 450, 900, 1900, 2300, and 2700 MHz
applications with <0.5 dB insertion loss. This GaAs
PHEMT design provides exceptional linearity
performance of +36 dBm 1dB compression point and
+55 dBm third order intercept at +3 volt bias. RF1
and RF2 are reflective opens when “Off”. On-chip
circuitry allows positive control operation at very low
DC current.
Electrical Specifi cations, TA = +25° C, Vctl = 0/+3 Vdc, 50 Ohm System
Parameter
Frequency
Insertion Loss
DC - 1.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
DC - 4.0 GHz
Isolation
DC - 1.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
DC - 4.0 GHz
Return Loss
18
10
9
8
DC - 4.0 GHz
0/+5V Control
0/+3V Control
Input Power for 1 dB Compression
0.3 - 4.0 GHz
Input Third Order Intercept
(Two-Tone Input Power = +27 dBm Each Tone)
0.3 - 4.0 GHz
Switching Characteristics
DC - 4.0 GHz
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
10 - 300
Min.
36
33
Typ.
Max.
Units
0.25
0.4
0.5
0.7
0.5
0.7
0.8
1.0
dB
dB
dB
dB
23
14
13
12
dB
dB
dB
dB
32
dB
39
36
dBm
dBm
55
dBm
70
140
ns
ns
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC544 / 544E
v00.0206
GaAs MMIC T/R SWITCH,
DC - 4 GHz
Insertion Loss
Return Loss
0
-10
-0.5
RETURN LOSS (dB)
-1
+25C
+85C
-40C
-1.5
RFC
RF1, RF2
-20
-30
-40
-2
-50
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0
0.5
1
1.5
FREQUENCY (GHz)
0
0
-5
-5
-10
-10
-15
-20
RF1
RF2
3
3.5
4
4.5
10
-15
-20
-25
-30
-30
-35
-35
-40
RF1 ON
RF2 ON
-40
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0
0.5
1
1.5
FREQUENCY (GHz)
2.5
3
3.5
4
4.5
Input IP3 vs. Vctl
65
60
60
INPUT IP3 (dBm)
65
55
50
+25C
+85C
-40C
45
2
FREQUENCY (GHz)
Input IP3 vs. Temperature, Vctl = 0/+3V
INPUT IP3 (dBm)
2.5
Isolation Between Ports RF1 & RF2
ISOLATION (dB)
ISOLATION (dB)
Isolation Between Ports RFC & RF1 / RF2
-25
2
FREQUENCY (GHz)
SWITCHES - SMT
INSERTION LOSS (dB)
0
55
+3V
+5V
50
45
40
40
0
0.5
1
1.5
2
2.5
FREQUENCY (GHz)
3
3.5
4
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 301
HMC544 / 544E
v00.0206
GaAs MMIC T/R SWITCH,
DC - 4.0 GHz
Input P1dB vs. Temperature, Vctl = 0/+3V
Compression vs. Vctl
45
INPUT P0.1dB & P1dB (dBm)
45
INPUT P1dB (dBm)
40
35
+25C
+85C
-40C
30
25
20
0.5
1
1.5
30
P0.1dB +3V
P0.1dB +5V
P1dB +3V
P1dB +5V
25
2
2.5
3
3.5
4
0
0.5
FREQUENCY (GHz)
10
SWITCHES - SMT
35
20
0
10 - 302
40
1
1.5
2
2.5
3
3.5
FREQUENCY (GHz)
Truth Table
Control Voltages
Control Input
Signal Path
A
B
RFC to RF1
RFC to RF2
Low
High
High
On
Off
Low
Off
On
State
Bias Condition
Low
0 to 0.2 Vdc @ 1 µA Typical
High
+3 Vdc @ 0.5 µA Typical to
+5 Vdc @ 2 µA Typical (±0.2 Vdc)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
4
HMC544 / 544E
v00.0206
GaAs MMIC T/R SWITCH,
DC - 4.0 GHz
Absolute Maximum Ratings
RF Input Power (Vctl = 0/+5V)
+39 dBm
Control Voltage Range (A & B)
-0.2 to +12 Vdc
Hot Switch Power Level
(Vctl = 0/+5V)
+39 dBm
Channel Temperature
150 °C
Continuous Pdiss (T= 85 °C)
(derate 7.14 mW/ °C above 85°C)
0.465 W
Thermal Resistance
140 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
DC blocks are required at ports RFC, RF1 and RF2.
10
SWITCHES - SMT
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC544
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC544E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H544
XXXX
[2]
544E
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 303
HMC544 / 544E
v00.0206
GaAs MMIC T/R SWITCH,
DC - 4.0 GHz
Typical Application Circuit
SWITCHES - SMT
10
Notes:
1. Set logic gate Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3V to +5V applied to the CMOS logic gates.
3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.
Pin Descriptions
10 - 304
Pin Number
Function
Description
1, 3, 5
RF2, RF1, RFC
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
2
GND
This pin must be connected to RF/DC ground.
4
B
See truth and control voltage tables.
6
A
See truth and control voltage tables.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC544 / 544E
v00.0206
GaAs MMIC T/R SWITCH,
DC - 4.0 GHz
Evaluation Circuit Board
SWITCHES - SMT
10
List of Materials for Evaluation PCB 101675 [1]
Item
Description
J1 - J5
PCB Mount SMA RF Connector
J6 - J8
DC Pin
C1 - C5
330 pF capacitor, 0402 Pkg.
U1
HMC544 / HMC544E SPDT Switch
PCB [2]
101659 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should
have 50 ohm impedance and the package ground
leads should be connected directly to the ground
plane similar to that shown above. The evaluation circuit board shown above is available from
Hittite Microwave Corporation upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 305
Similar pages