Hittite HMC591LP5 Gaas phemt mmic 2 watt power amplifier, 6.0 - 9.5 ghz Datasheet

HMC591LP5 / 591LP5E
v02.0107
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
AMPLIFIERS - SMT
5
Typical Applications
Features
The HMC591LP5 / HMC591LP5E is ideal for use as a
power amplifier for:
Saturated Output Power: +33 dBm @ 20% PAE
• Point-to-Point Radios
Gain: 18 dB
• Point-to-Multi-Point Radios
DC Supply: +7.0 V @ 1340 mA
• Test Equipment & Sensors
50 Ohm Matched Input/Output
• Military End-Use
QFN Leadless SMT Packages, 25 mm2
Output IP3: +41 dBm
• Space
Functional Diagram
General Description
The HMC591LP5 & HMC591LP5E are high dynamic
range GaAs PHEMT MMIC 2 Watt Power Amplifiers
which operate from 6 to 9.5 GHz. The amplifier
provides 18 dB of gain, +33 dBm of saturated power,
and 19% PAE from a +7.0V supply. This 50 Ohm
matched amplifier does not require any external
components and the RF I/Os are DC blocked for robust
operation. For applications which require optimum
OIP3, Idd should be set for 940 mA, to yield +41 dBm
OIP3. For applications which require optimum output P1dB, Idd should be set for 1340 mA, to yield
+33 dBm Output P1dB.
Electrical Specifications, TA = +25° C, Vdd = +7V, Idd = 1340 mA[1]
Parameter
Min.
Frequency Range
Typ.
Max.
Min.
6-8
Gain
16
Max.
18
dB
dB/ °C
Input Return Loss
14
12
dB
Output Return Loss
12
10
dB
33
dBm
33
dBm
41
41
dBm
1340
1340
mA
30
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
32
32.5
[2]
Supply Current (Idd)
30
[1] Adjust Vgg between -2 to 0V to achieve Idd= 1340 mA typical.
[2] Measurement taken at 7V @ 940mA, Pin/Tone = -15 dBm
5 - 598
GHz
0.05
Output Power for 1 dB
Compression (P1dB)
15
Units
0.05
Gain Variation Over Temperature
19
Typ.
6 - 9.5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC591LP5 / 591LP5E
v02.0107
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
20
26
15
24
22
S21
S11
S22
5
0
-5
20
18
16
-10
14
-15
12
-20
10
+25C
+85C
-40C
8
-25
4
5
6
7
8
9
10
11
6
12
6.5
7
0
-5
-5
-10
-15
+25C
+85C
-40C
8.5
9
9.5
10
-10
-15
+25C
+85C
-40C
-20
-25
-25
4
5
6
7
8
9
10
11
12
4
5
6
FREQUENCY (GHz)
35
34
34
33
33
Psat (dBm)
36
35
32
31
+25C
+85C
-40C
29
8
9
10
11
12
9
9.5
10
Psat vs. Temperature
36
30
7
FREQUENCY (GHz)
P1dB vs. Temperature
P1dB (dBm)
8
Output Return Loss vs. Temperature
0
RETURN LOSS (dB)
RETURN LOSS (dB)
Input Return Loss vs. Temperature
-20
7.5
FREQUENCY (GHz)
FREQUENCY (GHz)
AMPLIFIERS - SMT
28
GAIN (dB)
RESPONSE (dB)
25
10
5
Gain vs. Temperature
Broadband Gain & Return Loss
32
31
30
+25C
+85C
-40C
29
28
28
27
27
26
26
6
6.5
7
7.5
8
8.5
FREQUENCY (GHz)
9
9.5
10
6
6.5
7
7.5
8
8.5
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 599
HMC591LP5 / 591LP5E
v02.0107
P1dB vs. Current
Psat vs. Current
36
36
35
35
34
34
33
33
Psat (dBm)
P1dB (dBm)
AMPLIFIERS - SMT
5
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
32
31
30
29
31
30
28
27
27
26
26
6
6.5
7
7.5
8
8.5
9
9.5
10
6
FREQUENCY (GHz)
7.5
8
8.5
9
9.5
10
35
Pout(dBm), GAIN (dB), PAE(%)
44
42
40
OIP3 (dBm)
7
Power Compression @ 8 GHz,
7V @ 1340 mA
46
38
36
34
+25C
+85C
-40C
32
30
28
26
6
6.5
7
7.5
8
8.5
9
9.5
30
25
Pout
Gain
PAE
20
15
10
5
0
-14 -12 -10 -8 -6 -4 -2 0
10
FREQUENCY (GHz)
2
4
6
8 10 12 14 16 18
INPUT POWER (dBm)
Output IM3, 7V @ 940 mA
Output IM3, 7V @ 1340 mA
100
100
90
90
6 GHz
7 GHz
8 GHz
9 GHz
10 GHz
80
70
60
50
60
50
40
40
30
30
20
20
10
-20 -18 -16 -14 -12 -10 -8
-6
-4
-2
Pin/Tone (dBm)
0
2
4
6 GHz
7 GHz
8 GHz
9 GHz
10 GHz
80
IM3 (dBc)
70
IM3 (dBc)
6.5
FREQUENCY (GHz)
Output IP3 vs. Temperature
7V @ 940 mA, Pin/Tone = -15 dBm
5 - 600
940 mA
1140 mA
1340 mA
29
940 mA
1140 mA
1340 mA
28
32
6
8
10
-20 -18 -16 -14 -12 -10 -8
-6
-4
-2
0
2
Pin/Tone (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
4
6
8
HMC591LP5 / 591LP5E
v02.0107
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
Gain & Power vs. Supply Current @ 8 GHz
Gain & Power vs. Supply Voltage @ 8 GHz
34
32
30
28
Gain
P1dB
Psat
26
24
22
20
18
16
940
1140
34
32
30
28
Gain
P1dB
Psat
26
24
22
20
18
16
6.5
1340
7
Idd SUPPLY CURRENT (mA)
Reverse Isolation
vs. Temperature, 7V @ 1340 mA
10
-10
9.5
POWER DISSIPATION (W)
ISOLATION (dB)
Power Dissipation
0
-20
+25C
+85C
-40C
-30
7.5
Vdd SUPPLY VOLTAGE (Vdc)
AMPLIFIERS - SMT
36
GAIN (dB), P1dB (dBm), Psat(dBm)
GAIN (dB), P1dB (dBm), Psat(dBm)
36
5
-40
-50
-60
-70
9
8.5
8
6 GHz
7 GHz
8 GHz
9 GHz
10 GHz
7.5
7
6.5
-80
6
6.5
7
7.5
8
8.5
9
9.5
10
6
-14 -12 -10 -8
FREQUENCY (GHz)
Absolute Maximum Ratings
-6
-4
-2
0
2
4
6
8
10 12 14
INPUT POWER (dBm)
Typical Supply Current vs. Vdd
Drain Bias Voltage (Vdd)
+8 Vdc
Vdd (V)
Idd (mA)
Gate Bias Voltage (Vgg)
-2.0 to 0 Vdc
+6.5
1350
RF Input Power (RFin)(Vdd = +7.0 Vdc)
+15 dBm
+7.0
1340
Channel Temperature
175 °C
+7.5
1330
Continuous Pdiss (T= 75 °C)
(derate 104.3 mW/°C above 75 °C)
10.43 W
Thermal Resistance
(channel to package bottom)
9.59 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Note: Amplifier will operate over full voltage ranges shown
above Vgg adjusted to achieve Idd = 1340 mA at +7.0V
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 601
HMC591LP5 / 591LP5E
v02.0107
Outline Drawing
AMPLIFIERS - SMT
5
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC591LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC591LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H591
XXXX
[2]
H591
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
5 - 602
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC591LP5 / 591LP5E
v02.0107
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
Pad Number
Function
Description
1, 2, 6 - 8,
10 - 12, 14, 15,
17 - 19, 23, 24,
26, 27, 29 - 31
N/C
Not connected.
3, 5, 20, 22
GND
Package bottom has an exposed metal paddle
that must be connected to RF/DC ground.
4
RFIN
This pad is AC coupled and
matched to 50 Ohms.
9
Vgg
Gate control for amplifier. Adjust to achieve Idd of 1340 mA.
Please follow “MMIC Amplifier Biasing Procedure”
Application Note. External bypass capacitors of
100 pF and 2.2 μF are required.
13, 16, 25, 28, 32
Vdd 1-5
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 2.2 μF are required.
21
RFOUT
This pad is AC coupled and
matched to 50 Ohms.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
AMPLIFIERS - SMT
5
Pad Descriptions
5 - 603
HMC591LP5 / 591LP5E
v02.0107
AMPLIFIERS - SMT
5
5 - 604
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
Application Circuit
Component
Value
C1 - C6
100pF
C7 - C12
2.2μF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC591LP5 / 591LP5E
v02.0107
GaAs PHEMT MMIC 2 WATT
POWER AMPLIFIER, 6.0 - 9.5 GHz
5
AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 108190
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J4
DC Pin
C1 - C6
100pF Capacitor, 0402 Pkg.
C7 - C12
2.2 μF Capacitor, 1206 Pkg
U1
HMC591LP5 / HMC591LP5E
PCB [2]
109001 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 605
Similar pages