Hittite HMC603MS10E 0.5 db lsb gaas mmic 5-bit digital positive control attenuator, 0.7 - 3.8 ghz Datasheet

HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
ATTENUATORS - SMT
6
Typical Applications
Features
The HMC603MS10 / HMC603MS10E is ideal for:
0.5 dB LSB Steps to 15.5 dB
• Cellular/3G Infrastructure
Single Positive Control Per Bit
• ISM, MMDS
± 0.15 dB Typical Bit Error
• WLAN, WiMAX, & WiBro
High Input IP3: +50 dBm
MSOP10 SMT Package
Functional Diagram
General Description
The HMC603MS10 & HMC603MS10E are general
purpose broadband 5-bit positive control GaAs IC
digital attenuators in 10 lead MSOP surface mount
plastic packages. Covering 0.7 to 3.8 GHz, the insertion loss is less than 2.0 dB typical. The attenuator
bit values are 0.5 (LSB), 1, 2, 4 and 8 dB for a total
attenuation of 15.5 dB. Attenuation accuracy is
excellent at ± 0.15 dB typical with an IIP3 of +50 dBm.
Five bit control voltage inputs, toggled between 0
and +3 to +5V, are used to select each attenuation
state at less than 1.0 uA each. A single Vdd bias
of +3 to +5V applied through an external 5K Ohm
resistor is required.
Electrical Specifications,
TA = +25° C, Vdd= +3V to +5V & Vctl= 0/Vdd (Unless Otherwise Stated)
Parameter
Frequency (GHz)
0.7 - 1.4
1.4 - 2.3
2.3 - 2.7
2.7 - 3.8
Insertion Loss
Attenuation Range
Max.
Units
1.3
1.7
2.2
2.7
1.6
2.0
2.5
3.1
dB
dB
dB
dB
15.5
dB
25
18
13
12
dB
dB
dB
dB
All States
0.7 - 2.2
2.2 - 3.8
± (0.2 + 2% of Atten. Setting) Max.
± (0.3 + 3% of Atten. Setting) Max.
Vdd = 5V
Vdd = 3V
0.7 - 3.8
29
28
dBm
dBm
REF - 2 dB States
2.5 - 15.5 dB States
0.7 - 3.8
53
48
dBm
dBm
1.6
1.6
μs
μs
Attenuation Accuracy: (Referenced to Insertion Loss)
Input Third Order Intercept Point
(Two-tone Input Power = 0 dBm Each Tone)
Typical
0.7 - 1.4
1.4 - 2.3
2.3 - 2.7
2.7 - 3.8
Return Loss (RF1 & RF2, All Atten. States)
Input Power for 0.1 dB Compression
Min.
dB
dB
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
6 - 182
0.7 - 3.8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
Return Loss RF1, RF2
(Only Major States are Shown)
-5
-1
RETURN LOSS (dB)
INSERTION LOSS (dB)
6
0
0
-0.5
-1.5
-2
-2.5
-3
+25 C
+85 C
-40 C
-3.5
1 dB
8 dB
I.L
-10
0.5 dB
-15
2 dB
-20
-25
4 dB
15.5 dB
-4
0.5
1
1.5
2
2.5
3
3.5
-30
0.5
4
1
1.5
FREQUENCY (GHz)
2
2.5
3
3.5
4
FREQUENCY (GHz)
Normalized Attenuation
Bit Error vs. Attenuation State
0
0.5
-2
0.4
3.5 GHz
-4
2.4 GHz
0.3
BIT ERROR (dB)
NORMALIZED ATTENUATION (dB)
(Only Major States are Shown)
-6
-8
-10
-12
0.2
0.1
0
-0.1
-14
-16
-0.2
-18
0.5
-0.3
0.5
0.9 GHz
1
1.5
2
2.5
3
3.5
4
2
3.5
FREQUENCY (GHz)
5
1.9 GHz
6.5
8
9.5
11
12.5
14
15.5
ATTENUATION STATE (dB)
Bit Error vs. Frequency
Relative Phase vs. Frequency
(Only Major States are Shown)
(Only Major States are Shown)
40
0.6
1 dB
RELATIVE PHASE (deg)
0.5 dB
0.3
BIT ERROR (dB)
ATTENUATORS - SMT
Insertion Loss
0
2 dB
-0.3
15.5 dB
20
15.5 dB
8 dB
4 dB
0
-20
0.5, 1, 2 dB
4 dB
8 dB
-0.6
0.5
1
1.5
2
2.5
FREQUENCY (GHz)
3
3.5
4
-40
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 183
HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
Truth Table
Worst Case Step Error
0.6
Control Voltage Input
V1
8 dB
V2
4 dB
V3
2 dB
V4
1 dB
V5
0.5 dB
Attenuation
State
RF1 - RF2
0.2
High
High
High
High
High
Reference I.L.
0.1
High
High
High
High
Low
0.5 dB
0.5
0.4
STEP ERROR (dB)
ATTENUATORS - SMT
6
0.3
0
High
High
High
Low
High
1 dB
-0.2
High
High
Low
High
High
2 dB
-0.3
High
Low
High
High
High
4 dB
Low
High
High
High
High
8 dB
Low
Low
Low
Low
Low
15.5 dB
Max. Atten.
-0.1
-0.4
-0.5
-0.6
0.5
1
1.5
2
2.5
3
3.5
4
Any combination of the above states will provide an attenuation
approximately equal to the sum of the bits selected.
FREQUENCY (GHz)
Bias Voltage & Current
Control & Bias Voltages
Vdd = +5.0 Vdc ± 10%
Vdd
(VDC)
Idd (Typ.)
(μA)
+3.0
4.0
+5.0
5.0
State
Bias Condition
Low
0 to +0.2V @ 1.0 μA Max.
High
Vdd ± 0.2V @ 0.5 μA Max.
Note: Vdd = +3V to +5V ± 0.2V
0.00.20.2
Application Circuit
Note:
DC Blocking Capacitors C1 & C2 are required on RF1
& RF2. Choose C1 = C2 = 100 ~ 300 pF to allow lowest
customer specific frequency to pass with minimal loss.
R1= 5K Ohm is required to supply voltage to the circuit
through either Pin 6 or Pin 10.
6 - 184
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
Absolute Maximum Ratings
+30 dBm
Control Voltage (V1 - V5)
Vdd + 0.5 Vdc
Bias Voltage (Vdd)
+8.0 Vdc
Channel Temperature
150 °C
Thermal Resistance
182 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
6
ATTENUATORS - SMT
RF Input Power (0.7 - 3.8 GHz)
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC603MS10
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC603MS10E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking
[1]
H603
XXXX
[2]
H603
XXXX
[3]
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 185
HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
Pin Descriptions
ATTENUATORS - SMT
6
6 - 186
Pin Number
Function
Description
1-5
V1 - V5
See truth table and control voltage table.
6
RF2
This pin is DC coupled and matched to 50 Ohm.
A blocking capacitor is required.
7-9
GND
These pins must be DC grounded.
10
RF1
This pin is DC coupled and matched to 50 Ohm.
A blocking capacitor is required.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC603MS10 / 603MS10E
v00.0905
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
Evaluation Circuit Board
ATTENUATORS - SMT
6
* R2 - R6= 100 Ohm.
These resistors are optional
and may be used to enhance
decoupling of the RF path
from the control inputs.
List of Materials for Evaluation PCB 112747 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J8
DC Pin
R1
5k Ohm Resistor, 0402 Pkg.
R2 - R6
100 Ohm Resistor, 0402 Pkg.
C1 - C2
0402 Chip Capacitor, Select Value for Lowest
Frequency
U1
HMC603MS10 / HMC603MS10E
Digital Attenuators
PCB [2]
112746 Evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 187
Similar pages