HITTITE HMC687LP4_10

HMC687LP4 / 687LP4E
v04.0509
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Typical Applications
Features
The HMC687LP4(E) is Ideal for:
High Input IP3: +35 dBm
• Cellular/3G & LTE/WiMAX/4G
8 dB Conversion Loss @ 0 dBm LO
• Basestations & Repeaters
Optimized for High Side LO Input
• GSM, CDMA & OFDM
Upconversion & Downconversion Applications
• Transmitters and Receivers
Adjustable Supply Current
24 Lead 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
The HMC687LP4(E) is a high dynamic range passive
MMIC mixer with integrated LO amplifier in a 4x4 SMT
QFN package covering 1.7 to 2.2 GHz. Excellent input
IP3 performance of +35 dBm for down conversion is
provided for 3G & 4G GSM/CDMA applications at an
LO drive of 0 dBm. With an input 1 dB compression
of +23 dBm, the RF port will accept a wide range of
input signal levels. Conversion loss is 8 dB typical.
The DC to 500 MHz IF frequency response will satisfy GSM/CDMA transmit or receive frequency plans.
The HMC687LP4(E) is optimized for high side LO
frequency plans and is pin for pin compatible with the
HMC685LP4(E) which is a 1.7 - 2.2 GHz converter
optimized for low side LO.
Electrical Specifications,
TA = +25° C, IF = 200 MHz, LO = 0 dBm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*
Icc = 120 mA
Nominal Supply
Parameter
Min.
Typ.
Icc = 100 mA
Icc = 70 mA
Typ.
Typ.
Max.
Units
Frequency Range, RF
1.7 - 2.2
GHz
Frequency Range, LO
1.7 - 2.4
GHz
Frequency Range, IF
DC - 500
Conversion Loss
8
Noise Figure (SSB)
10.5
MHz
8
8
dB
8
8
8
dB
34
dB
LO to RF Isolation
22
30
32
LO to IF Isolation
22
29
29
31
dB
RF to IF Isolation
31
42
42
42
dB
35
34
32
dBm
IP3 (Input)
1 dB Compression (Input)
LO Drive Input Level (Typical)
Supply Current Icc total
23
-3 to +3
120
145
22
20
dBm
-3 to +3
-3 to +3
dBm
100
70
mA
* Unless otherwise noted all measurements performed as downconverter with high side LO & IF = 200 MHz.
10 - 1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Conversion Gain vs. Temperature
Isolation
0
RF/IF
LO/RF
LO/IF
-5
-10
+25 C
+85 C
-40 C
-15
-20
1.6
1.7
1.8
1.9
2
-30
-40
-50
2.1
2.2
2.3
-60
1.6
2.4
1.7
1.8
RF FREQUENCY (GHz)
1.9
2
2.1
2.2
2.3
2.4
RF FREQUENCY (GHz)
Conversion Gain vs. LO Drive
Return Loss
0
0
-5
-5
RETURN LOSS (dB)
CONVERSION GAIN (dB)
10
-20
-10
-3 dBm
0 dBm
+3 dBm
-15
-20
1.6
1.7
1.8
1.9
2
-10
-15
RF
LO
-20
-25
2.1
2.2
2.3
-30
1.2
2.4
1.4
1.6
RF FREQUENCY (GHz)
1.8
2
2.2
2.4
FREQUENCY (GHz)
IF Bandwidth (LO= 2.2 GHz)
Input P1dB vs. Temperature
0
30
-5
25
-15
P1dB (dBm)
RESPONSE (dB)
-10
-20
-25
20
-30
+25 C
+85 C
-40 C
15
IF Return Loss
Conversion Gain
-35
Mixers - SINGLE & DOUBLE BALANCED - SMT
-10
ISOLATION (dB)
CONVERSION GAIN (dB)
0
-40
-45
0
0.1
0.2
0.3
IF FREQUENCY (GHz)
0.4
0.5
10
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
RF FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
10 - 2
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Input IP3 vs. Temperature [1]
40
35
35
IP3 (dBm)
40
30
-3 dBm
0 dBm
+3 dBm
25
20
1.6
1.7
1.8
1.9
2
+25 C
+85 C
-40 C
25
2.1
2.2
2.3
20
1.6
2.4
1.7
1.8
2.1
2.2
2.3
2.4
90
-2RF+2LO RESPONSE (dBc)
-2RF +2LO RESPONSE (dBc)
2
-2RF +2LO Response vs. LO Drive [2]
90
+25 C
+85 C
-40 C
80
70
60
50
40
1.6
1.9
RF FREQUENCY (GHz)
-2RF +2LO Response vs. Temperature [2]
1.7
1.8
1.9
2
2.1
2.2
2.3
70
60
50
40
1.6
2.4
-3 dBm
0 dBm
+3 dBm
80
1.7
1.8
RF FREQUENCY (GHz)
1.9
2
2.1
2.2
2.3
2.4
RF FREQUENCY (GHz)
-3RF +3LO Response vs. Temperature [2]
-3RF +3LO Response vs. LO Drive [2]
90
-3RF+3LO RESPONSE (dBc)
90
85
80
75
+25 C
+85 C
-40 C
70
65
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
RF FREQUENCY (GHz)
[1] Two-tone input power = +9 dBm each tone, 1 MHz spacing.
10 - 3
30
RF FREQUENCY (GHz)
-3RF+3LO RESPONSE (dBc)
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
IP3 (dBm)
Input IP3 vs. LO Drive [1]
85
80
75
-3 dBm
0 dBm
+3 dBm
70
65
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
RF FREQUENCY (GHz)
[2] Referenced to RF Input power at 0 dBm
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Low Power Consumption Performance
Input IP3 vs. G_Bias Voltage [1]
-6
32
-7
30
-8
28
Vcc1, 2, 3 = 3.3 V
R9 = 270 Ohms
-10
-12
1.6
1.8
1.9
1V
1.5 V
2V
2.5 V
24
1V
1.5 V
2V
2.5 V
1.7
26
Vcc1, 2, 3 = 3.3 V
R9 = 270 Ohms
Icc = 67 mA
2
2.1
2.2
22
2.3
20
1.6
2.4
1.7
1.8
RF FREQUENCY (GHz)
-6
36
-7
34
-8
32
-9
-11
-12
1.6
1.7
1.8
1.9
Vcc1, 2, 3 = 5.0 V
R9 = 270 Ohms
Icc = 120 mA
2
2.1
2.1
2.3
2.4
30
1.5 V
2V
2.5 V
3V
3.5 V
2.2
26
2.3
24
1.6
2.4
1.7
1.8
RF FREQUENCY (GHz)
1.9
2
2.1
2.2
2.3
2.4
RF FREQUENCY (GHz)
Conversion Gain vs. Icc
Input IP3 vs. Icc [1]
-7
36
Vcc1, 2, 3 = 5.0 V
G_Bias = 2.5 V
34
-8
IP3 (dBm)
32
-9
120 mA
110 mA
100 mA
90 mA
80 mA
70 mA
-10
-11
1.6
2.2
Vcc1, 2, 3 = 5.0 V
R9 = 270 Ohms
Icc = 120 mA
28
1.5 V
2V
2.5 V
3V
3.5 V
2
Input IP3 vs. G_Bias Voltage [1]
IP3 (dBm)
CONVERSION GAIN (dB)
Conversion Gain vs. G_Bias Voltage
-10
1.9
RF FREQUENCY (GHz)
1.7
1.8
1.9
30
28
120 mA
110 mA
100 mA
90 mA
80 mA
70 mA
26
Vcc1, 2, 3 = 5.0 V
G_Bias = 2.5 V
2
2.1
2.2
2.3
24
2.4
RF FREQUENCY (GHz)
22
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
Mixers - SINGLE & DOUBLE BALANCED - SMT
-9
-11
CONVERSION GAIN (dB)
10
Icc = 67 mA
IP3 (dBm)
CONVERSION GAIN (dB)
Conversion Gain vs. G_Bias Voltage
2.4
RF FREQUENCY (GHz)
[1] Two-tone input power = +9 dBm each tone, 1 MHz spacing
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
10 - 4
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Low Power Consumption Performance
Conversion Gain vs.
Temperature, Icc = 70 mA
Input IP3 vs. Temperature, Icc = 70 mA [1]
36
34
-7
32
-8
IP3 (dBm)
30
-9
-10
-12
1.6
28
26
24
1.7
1.8
1.9
2
+25 C
+85 C
-40 C
22
+25 C
+85 C
-40 C
-11
20
2.1
2.2
2.3
18
1.6
2.4
1.7
1.8
RF FREQUENCY (GHz)
1.9
2
2.1
2.2
2.3
2.4
2.2
2.3
2.4
RF FREQUENCY (GHz)
Icc vs. R9
130
120
Icc (mA)
110
Vcc1, 2, 3 = 5.0 V
100
90
80
70
60
250
300
350
400
450
500
550
600
R9 (Ohms)
Typical Upconverter Performance
Conversion Gain vs. LO Drive
Input IP3 vs. LO Drive [1]
0
35
-5
30
IP3 (dBm)
CONVERSION GAIN (dB)
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
CONVERSION GAIN (dB)
-6
-10
-3 dBm
0 dBm
+3 dBm
-15
-20
1.6
1.7
1.8
1.9
2
2.1
25
-3 dBm
0 dBm
+3 dBm
20
2.2
2.3
2.4
RF FREQUENCY (GHz)
15
1.6
1.7
1.8
1.9
2
2.1
RF FREQUENCY (GHz)
[1] Two-tone input power = +9 dBm each tone, 1 MHz spacing.
10 - 5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Absolute Maximum Ratings
MxN Spurious @ IF Port
RF / IF Input (Vcc1, 2, 3 = +5V)
+23 dBm
LO Drive (Vcc1, 2, 3 = +5V)
+10 dBm
mRF
0
1
2
3
4
Vcc1,2,3
+5.5V
0
xx
20
27
54
28
Channel Temperature
125 °C
1
43
0
39
31
57
2
64
60
59
68
87
3
110
81
102
77
96
4
115
129
115
115
112
0.83 mW
Thermal Resistance
(channel to ground paddle)
48.33 °C/W
Storage Temperature
-65 to 150 °C
Operating Temperature
-40 to +85 °C
RF Freq. = 1.9 GHz @ 0 dBm
LO Freq. = 2.1 GHz @ 0 dBm
All values in dBc below IF power level (-1RF + 1LO).
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Typical Supply Current vs. Vcc
Vcc1, 2, 3 (V)
Harmonics of LO
Icc total (mA)
nLO Spur @ RF Port
4.75
113
LO Freq. (GHz)
1
2
3
4
5.00
120
1.6
37
25
46
42
5.25
127
1.7
35
24
44
41
Downconverter will operate over full voltage range shown above.
1.8
33
23
43
42
1.9
30
22
36
36
2.0
29
23
40
28
2.1
29
24
44
27
2.2
32
24
42
31
2.3
34
24
42
38
LO = 0 dBm
All values in dBc below input LO level measured at RF port.
10
Mixers - SINGLE & DOUBLE BALANCED - SMT
Continuous Pdiss (T = 85°C)
(derate 20.69 mW/°C above 85°C)
nLO
[1] Two-tone input power = +9 dBm each tone, 1 MHz spacing.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
10 - 6
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Outline Drawing
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
10 - 7
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.25mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE
FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC687LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC687LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H687
XXXX
H687
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Pin Descriptions
Pin Number
Description
N/C
No connection. These pins may be connected to RF
ground. Performance will not be affected.
2, 5, 15, 17
GND
Package bottom must be
connected to RF/DC ground.
3
RF
This pin is matched single-ended 50 Ohm and DC
shorted to ground through a balun.
4
TAP
Center tap of secondary side of the internal RF balun.
Short to ground with a zero ohm close to the IC.
8, 10, 24
Vcc1, Vcc2,
Vcc3
Power supply voltage. See application circuit
for required external components.
9
LO_BIAS
LO buffer current adjustment pin. Adjust the LO buffer
current through the external resistor R9 shown in the
application circuit (connect 270 Ohms for nominal
operation). This adjustment allows for a trade-off
between power dissipation and linearity performance of
the converter.
16
LO
This pin is matched single-ended 50 Ohm and DC
shorted to ground through a balun.
19
G_BIAS
External bias. See application circuit for recommended external components. Apply +2.5V for nominal
operation at 5V supply voltage. G_Bias can be set to
between 0 and 5Vdc. The G_bias pin has an internal
15K ohm resistance to ground. This adjustment allows
for a trade off between conversion loss and linearity
performance of the converter (see figures CG, IP3 vs.
G-Bias).
21, 22
IFN, IFP
Differential IF input / output pins matched to differential
50 Ohms. For applications not requiring operation to
DC an off chip DC blocking capacitor should be used.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
10
Mixers - SINGLE & DOUBLE BALANCED - SMT
Function
1, 6, 7, 11 - 14,
18, 20, 23
10 - 8
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Evaluation PCB
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
List of Materials for Evaluation PCB 119935 [1]
Item
Description
J1 - J3
SMA Connector
J4 - J7
DC Pin
C19
22 pF Capacitor, 0402 Pkg.
C7, C8
10 nF Capacitor, 0402 Pkg.
C10, C12, C16, C18
1 nF Capacitor, 0402 Pkg.
C11, C15, C17, C21
0.1 µF Capacitor, 0402 Pkg.
C20
4.7 µF Case A, Tantulum
R2 - R4, R7, R8
0 Ohm Resistor, 0402 Pkg.
R9
270 Ohm Resistor, 0603 Pkg.
T1
1:1 Transformer - Tyco MABA CT0039
U1
HMC687LP4(E) Downconverter
PCB [2]
118162 Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25R, FR4
10 - 9
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC687LP4 / 687LP4E
v04.0509
BiCMOS MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 1.7 - 2.2 GHz
Application Circuit
Mixers - SINGLE & DOUBLE BALANCED - SMT
10
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
10 - 10