HITTITE HMC712LP3CE_10

HMC712LP3CE
v04.0410
Attenuators - ANALOG - SMT
8
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
Typical Applications
Features
The HMC712LP3CE is ideal for:
Wide Bandwidth: 5 - 26.5 GHz
• Point-to-Point Radio
Excellent Linearity: +28 dBm Input P1dB
• VSAT Radio
Wide Attenuation Range: 28 dB
• Test Instrumentation
Absorptive Topology
• Microwave Sensors
Singe or Dual Control Operation
• Military, ECM & Radar
16 Lead 3x3mm SMT Package: 9mm²
Functional Diagram
General Description
The HMC712LP3CE is an absorptive Voltage Variable Attenuator (VVA) which operates from 5 - 26.5
GHz and is ideal in designs where an analog DC
control signal must be used to control RF signal
levels over a 28 dB amplitude range. It features two
shunt-type attenuators which are controlled by two
analog voltages, Vctrl1 and Vctrl2. Optimum linearity
performance of the attenuator is achieved by first
varying Vctrl1 of the 1st attenuation stage from -3V
to 0V with Vctrl2 fixed at -3V. The control voltage of
the 2nd attenuation stage, Vctrl2, should then be
varied from -3V to 0V, with Vctrl1 fixed at 0V. The
HMC712LP3CE is housed in a RoHS compliant
3x3 mm QFN leadless package
However, if the Vctrl1 and Vctrl2 pins are connected
together it is possible to achieve the full analog
attenuation range with only a small degradation
in input IP3 performance. Applications include
AGC circuits and temperature compensation of
multiple gain stages in microwave point-to-point and
VSAT radios.
Electrical Specifications, TA = +25° C, 50 Ohm system
Parameter
Insertion Loss
8-1
Min.
5 - 16 GHz
16 - 24 GHz
24 - 26.5 GHz
Typ.
3.5
4.5
5.5
Max.
Units
dB
dB
dB
Attenuation Range
28
dB
Input Return Loss
12
dB
Output Return Loss
10
dB
Input Power for 1 dB Compression (any attenuation)
28
dBm
Input Third Order Intercept
(Two-tone Input Power = 10 dBm Each Tone)
32
dBm
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC712LP3CE
v04.0410
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
8
Attenuation vs. Frequency over Vctrl
Vctrl1 = 0V, Vctrl2 = Variable
Attenuation vs. Frequency over Vctrl
Vctrl1 = Variable, Vctrl2 = -3V
ATTENUATION (dB)
ATTENUATION (dB)
-10
-5
-10
-3.0 V
-1.6 V
-1.2 V
-0.6 V
0.0 V
-20
-30
-3.0 V
-1.8 V
-1.4 V
-0.8 V
0.0 V
-40
-15
-50
2
6
10
14
18
22
26
2
30
6
10
14
FREQUENCY (GHz)
22
26
30
Attenuation vs. Vctrl2
Over Temperature @ 10 GHz, Vctrl1 = 0V
Attenuation vs. Vctrl1
Over Temperature @ 10 GHz, Vctrl2 = -3V
0
0
-5
ATTENUATION (dB)
-2
-4
-6
+25 C
+85 C
-40 C
-8
-10
-15
-20
+25 C
+85 C
-40 C
-25
-30
-10
-35
-3
-2.5
-2
-1.5
-1
-0.5
0
-3
-2.5
-2
Vctrl1 (V)
-1.5
-1
-0.5
0
Vctrl2 (V)
Attenuation vs. Pin @ 10 GHz
Vctrl1 = Variable, Vctrl2 = -3V
0
-2
ATTENUATION (dB)
ATTENUATION (dB)
18
FREQUENCY (GHz)
Attenuators - ANALOG - SMT
0
0
-4
-6
-8
-3.0 V
-1.8 V
-1.4 V
-10
-1.0 V
-0.4
0.0 V
-12
0
5
10
15
20
INPUT POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-2
HMC712LP3CE
v04.0410
Insertion Phase vs. Vctrl2, Vctrl1 = 0V
180
180
135
135
INSERTION PHASE (degrees)
INSERTION PHASE (degrees)
Insertion Phase vs. Vctrl1, Vctrl2 = -3V
90
45
1 GHz
5 GHz
10 GHz
0
20 GHz
25 GHz
-45
-90
-135
90
45
0
1 GHz
5 GHz
10 GHz
20 GHz
25 GHz
-45
-90
-135
-180
-3
-180
-2.5
-2
-1.5
-1
-0.5
0
-3
-2.5
-2
VCRTL 1
-10
-10
RETURN LOSS (dB)
0
-20
-3.0 V
-1.2 V
0.0 V
-40
0
-20
-3.0 V
-1.4 V
0.0 V
-30
6
10
14
18
22
26
2
30
6
10
14
18
22
26
30
26
30
FREQUENCY (GHz)
FREQUENCY (GHz)
Output Return Loss
Vctrl1 = Variable, Vctrl2 = -3V
Output Return Loss
Vctrl1 = 0V, Vctrl2 = Variable
0
RETURN LOSS (dB)
0
RETURN LOSS (dB)
-0.5
-40
2
-10
-20
-3.0 V
-1.2 V
0.0 V
-10
-20
-3.0 V
-1.4 V
0.0 V
-30
-30
2
6
10
14
18
FREQUENCY (GHz)
8-3
-1
Input Return Loss
Vctrl1 = 0V, Vctrl2 = Variable
0
-30
-1.5
VCTRL 2
Input Return Loss
Vctrl1 = Variable, Vctrl2 = -3V
RETURN LOSS (dB)
Attenuators - ANALOG - SMT
8
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
22
26
30
2
6
10
14
18
22
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC712LP3CE
v04.0410
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
Input IP3 vs Input Power @ 10 GHz
Vctrl1 = Variable, Vctrl2 = -3V
Input IP3 vs. Input Power Over Frequency
Vctrl1 = -2.0V, Vctrl2 = -3V (Worst Case IP3)
60
40
IP3 (dBm)
IP3 (dBm)
35
30
-3.0 V
-2.0 V
-1.6 V
-1.0 V
0.0 V
20
30
5 GHz
15 GHz
20 GHz
30 GHz
25
10
20
0
5
10
15
20
0
SINGLE TONE INPUT POWER (dBm)
Input IP3 vs. Input Power Over Temperature
@ 10 GHz, Vctrl1 = -2.0V, Vctrl2 = -3V
10
15
20
Attenuation vs. Frequency over Vctrl
Vctrl1 = Vctrl2
0
40
-10
ATTENUATION (dB)
35
IP3 (dBm)
5
SINGLE TONE INPUT POWER (dBm)
30
+25 C
+85 C
-40 C
25
-20
-30
Attenuators - ANALOG - SMT
40
50
-3.0 V
-1.6 V
-1.2 V
-0.6 V
0.0 V
-40
-50
20
0
5
10
15
2
20
9
Attenuation vs. Vctrl over Temperature
@ 10 GHz, Vctrl1 = Vctrl2
23
30
Attenuation vs. Input Power over Vctrl
Vctrl1 = Vctrl2
0
-10
-10
ATTENUATION (dB)
0
-20
+25 C
+85 C
-40 C
-30
16
FREQUENCY (GHz)
SINGLE TONE INPUT POWER (dBm)
ATTENUATION (dB)
8
-20
-30
-3.0 V
-1.8 V
-1.4 V
-1.0 V
-0.4 V
0.0 V
-40
-40
-3
-2.5
-2
-1.5
-1
CONTROL VOLTAGE (V)
-0.5
0
0
5
10
15
20
INPUT POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-4
HMC712LP3CE
v04.0410
8
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
Input Return Loss, Vctrl1 = Vctrl2
Output Return Loss, Vctrl1 = Vctrl2
-10
RETURN LOSS (dB)
RETURN LOSS (dB)
0
-20
-3.0 V
-1.2 V
0.0 V
-30
-10
-20
-3.0 V
-1.2 V
0.0 V
-40
-30
2
6
10
14
18
22
26
30
2
FREQUENCY (GHz)
6
10
14
18
22
26
30
FREQUENCY (GHz)
Input IP3 vs. Input Power Over
Vctrl @ 10 GHz, Vctrl1 = Vctrl2
60
50
40
IP3 (dBm)
Attenuators - ANALOG - SMT
0
30
20
-3.0 V
-2.0 V
-1.6 V
-1.0 V
0.0 V
10
0
0
5
10
15
20
SINGLE TONE INPUT POWER (dBm)
Absolute Maximum Ratings
8-5
Control Voltages
RF Input Power
+30 dBm
Vctrl1
-3 to 0V @ 10 µA
Control Voltage Range
+1 to -5V
Vctrl2
-3 to 0V @ 10 µA
Channel Temperature
150 °C
Continuous Pdiss (T = 85 °C)
1W
Thermal Resistance
(Channel to ground paddle)
66 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC712LP3CE
v04.0410
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
8
Attenuators - ANALOG - SMT
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.05mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC712LP3CE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
H712
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-6
HMC712LP3CE
v04.0410
Attenuators - ANALOG - SMT
8
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
Pin Descriptions
Pin Number
Function
Description
1, 2, 4, 9, 11, 12
Ground Paddle
GND
Ground paddle must be connected to RF/DC ground.
3
RFIN
This pin is DC coupled and matched to 50 Ohms.
A blocking capacitor is required if RF line potential
is not equal to 0V.
5, 8, 13 - 16
N/C
These pins should be connected to PCB RF ground to
maximize performance.
6
Vctrl1
Control Voltage 1
7
Vctrl2
Control Voltage 2
10
RFOUT
This pin is DC coupled and matched to 50 Ohms.
A blocking capacitor is required if RF line potential
is not equal to 0V.
Interface Schematic
Application Circuit
8-7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC712LP3CE
v04.0410
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
8
Attenuators - ANALOG - SMT
Evaluation PCB
List of Materials for Evaluation PCB 123773 [1]
Item
Description
J1, J2
PCB Mount SMA RF Connector
C1, C2
100 pF Capacitor, 0402 Pkg.
C3, C4
1000 pF Capacitor, 0603 Pkg.
C5, C6
4.7 µF Capacitor, Tantalum
V1, V2
DC Pin
U1
HMC712LP3CE Voltage Variable Attenuator
PCB [2]
123771 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-8