Hittite HMC719LP4 Gaas phemt mmic high ip3 low noise amplifier, 1.3 - 2.9 ghz Datasheet

HMC719LP4 / 719LP4E
v04.0610
Amplifiers - Low Noise - SMT
7
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
Typical Applications
Features
The HMC719LP4(E) is ideal for:
Noise Figure: 1.0 dB
• Cellular/3G and LTE/WiMAX/4G
Gain: 34 dB
• BTS & Infrastructure
Output IP3: +39 dBm
• Repeaters and Femtocells
Single Supply: +3V to +5V
• Access Points
50 Ohm Matched Input/Output
• Test Equipment & Military
24 Lead 4x4 mm SMT Package: 16 mm2
Functional Diagram
General Description
The HMC719LP4(E) is a GaAs PHEMT MMIC
Low Noise Amplifier that is ideal for Cellular/3G and
LTE/WiMAX/4G basestation front-end receivers
operating between 1.3 and 2.9 GHz. The amplifier
has been optimized to provide 1.0 dB noise figure,
34 dB gain and +39 dBm output IP3 from a single
supply of +5V. Input and output return losses are
excellent and the LNA requires minimal external
matching and bias decoupling components. The
HMC719LP4(E) shares the same package and pinout
with the HMC718LP3(E) 600 - 1400 MHz LNA. The
HMC719LP4(E) can be biased with +3V to +5V and
features an externally adjustable supply current
which allows the designer to tailor the linearity
performance of the LNA for each application.
Electrical Specifications, TA = +25°C, Rbias = 1.5k Ohms*
Parameter
Vdd = +3V
Min.
Frequency Range
Gain
Typ.
Max.
Min.
1.3 - 2.2
27
Gain Variation Over Temperature
Vdd = +5V
Typ.
Max.
Min.
2.2 - 2.9
32
22
0.02
Min.
29
35
24
0.02
2.2 - 2.9
GHz
28
dB
0.02
13.5
17.5
16.5
dB
10.5
9.5
13.5
11.5
dB
21.5
dBm
23
dBm
Saturated Output Power (Psat)
12.5
18
Output Third Order Intercept (IP3)
32
Total Supply Current (Idd)
187
15.5
18
18.5
187
18
23
31
220
21.5
39
220
272
1.25
dB/ °C
16
15.5
1.2
Units
Input Return Loss
12.5
0.95
Max.
1.0
Output Power for 1 dB
Compression (P1dB)
1.6
Typ.
Noise Figure
Output Return Loss
1.3
Max.
1.3 - 2.2
26.5
0.02
1.3
Typ.
1.6
39
315
272
dB
dBm
315
mA
* Rbias resistor sets current, see application circuit herein, Vdd = Vdd1 = Vdd2
7-1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
Broadband Gain & Return Loss [1] [2]
7
Gain vs. Temperature [1]
S21
30
35
Vdd=5V
Vdd=3V
10
GAIN (dB)
RESPONSE (dB)
20
S11
0
-10
-40
0.5
+25C
+85C
-40C
25
-20
-30
30
S22
0.8
1.1
1.4
1.7
2
2.3 2.6
FREQUENCY (GHz)
2.9
3.2
20
1.2
3.5
Gain vs. Temperature [2]
1.5
1.8
2.1
2.4
FREQUENCY (GHz)
2.7
3
Input Return Loss vs. Temperature [1]
0
40
-5
RETURN LOSS (dB)
GAIN (dB)
35
30
+25C
+85C
-40C
25
20
1.2
1.5
1.8
2.1
2.4
FREQUENCY (GHz)
2.7
-20
-30
1.2
3
1.5
1.8
2.1
2.4
FREQUENCY (GHz)
2.7
3
Reverse Isolation vs. Temperature [1]
0
0
+25C
+85C
-40C
-5
+25C
+85C
-40C
-20
ISOLATION (dB)
RETURN LOSS (dB)
-15
-25
Output Return Loss vs. Temperature [1]
-10
-15
-20
1.2
+25C
+85C
-40C
-10
Amplifiers - Low Noise - SMT
40
40
-40
-60
1.5
1.8
2.1
2.4
FREQUENCY (GHz)
[1] Vdd = 5V, Rbias = 1.5K
2.7
3
-80
1.2
1.5
1.8
2.1
2.4
FREQUENCY (GHz)
2.7
3
[2] Vdd = 3V, Rbias = 1.5K
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-2
HMC719LP4 / 719LP4E
v04.0610
7
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
Noise Figure vs. Temperature [1] [2]
P1dB vs. Temperature [1] [2]
26
+85C
24
Vdd=5V
Vdd=3V
1.6
Vdd=5V
22
1.4
P1dB (dBm)
NOISE FIGURE (dB)
1.8
1.2
1
20
+25C
+85C
-40C
18
Vdd=3V
16
0.8
+25C
0.6
14
-40C
0.4
1.2
1.5
1.8
2.1
2.4
2.7
12
1.2
3
1.5
1.8
FREQUENCY (GHz)
24
3
2.7
3
+25C
+85C
-40C
45
Vdd=5V
22
40
IP3 (dBm)
Vdd=5V
20
18
Vdd=3V
35
Vdd=3V
+25C
+85C
-40C
14
1.5
1.8
2.1
2.4
30
2.7
25
1.2
3
1.5
1.8
2.1
2.4
FREQUENCY (GHz)
FREQUENCY (GHz)
Output IP3 and Idd vs.
Supply Voltage @ 1700 MHz [3]
Output IP3 and Idd vs.
Supply Voltage @ 2200 MHz [3]
250
40
35
200
35
200
30
150
30
150
25
100
25
100
40
IP3
15
2.7
50
Idd1
Idd2
3.1
3.5
3.9
4.3
4.7
5.1
0
5.5
[2] Vdd = 3V, Rbias = 1.5K
250
IP3
20
15
2.7
VOLTAGE SUPPLY (V)
[1] Vdd = 5V, Rbias = 1.5K
300
Idd1
Idd2
50
0
3.1
3.5
3.9
4.3
4.7
5.1
5.5
VOLTAGE SUPPLY (V)
[3] Rbias = 1.5K
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
Idd (mA)
20
IP3 (dBm)
45
Idd (mA)
300
45
IP3 (dBm)
2.7
50
16
7-3
2.4
Output IP3 vs. Temperature [1] [2]
26
12
1.2
2.1
FREQUENCY (GHz)
Psat vs. Temperature [1] [2]
P1dB (dBm)
Amplifiers - Low Noise - SMT
2
HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
35
Pout
Gain
PAE
25
20
15
10
5
0
-5
-29
-26
-23
-20
-17
-14
INPUT POWER (dBm)
-11
15
10
5
0
-8
30
30
Pout
Gain
PAE
15
10
5
0
-27
-24
-21
-18
-15
-12
INPUT POWER (dBm)
-9
-6
NF
0
40
-27
-24
-21
-18
-15
INPUT POWER (dBm)
-12
-9
20
1
15
5.1
NF
1.4
1.3
30
1.2
25
1.1
20
1
0.9
15
0.9
0.8
10
2.7
5.5
[2] Vdd = 3V, Rbias = 1.5K
P1dB
Gain
NOISE FIGURE (dB)
1.1
1.5
35
NOISE FIGURE (dB)
25
[1] Vdd = 5V, Rbias = 1.5K
5
1.4
1.2
3.9
4.3
4.7
VOLTAGE SUPPLY (V)
10
45
30
3.5
-12
Pout
Gain
PAE
15
1.5
1.3
3.1
20
-5
-30
35
10
2.7
-15
Gain, Power & Noise Figure
vs. Supply Voltage @ 2200 MHz [3]
45
P1dB
Gain
-24
-21
-18
INPUT POWER (dBm)
25
-3
Gain, Power & Noise Figure
vs. Supply Voltage @ 1700 MHz [3]
40
-27
Power Compression @ 2200 MHz [2]
35
20
Pout
Gain
PAE
20
Pout (dBm), Gain (dB), PAE (%)
Pout (dBm), Gain (dB), PAE (%)
25
35
-5
-30
Gain (dB) & P1dB (dBm)
30
-5
-30
Power Compression @ 2200 MHz [1]
25
Amplifiers - Low Noise - SMT
35
Pout (dBm), Gain (dB), PAE (%)
40
Gain (dB) & P1dB (dBm)
Pout (dBm), Gain (dB), PAE (%)
40
30
7
Power Compression @ 1700 MHz [2]
Power Compression @ 1700 MHz [1]
0.8
3.1
3.5
3.9
4.3
4.7
VOLTAGE SUPPLY (V)
5.1
5.5
[3] Rbias = 1.5K
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-4
HMC719LP4 / 719LP4E
v04.0610
7-5
Gain, Noise Figure & Rbias @ 1900 MHz
40
35
1.8
38
33
1.6
36
31
1.4
GAIN (dB)
IP3 (dBm)
Output IP3 vs. Rbias @ 1900 MHz
34
Vdd=3V
Vdd=5V
32
10
1.2
Vdd=3V
Vdd=5V
1
27
30
1
29
100
Rbias (Ohms)
1000
10000
25
100
0.8
1000
Rbias (Ohms)
10000
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
NOISE FIGURE (dB)
Amplifiers - Low Noise - SMT
7
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
HMC719LP4 / 719LP4E
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
7
Absolute Bias Resistor
Range & Recommended Bias Resistor Values for Idd
Vdd (V)
3V
Rbias Ω
Idd1 (mA)
Idd2 (mA)
1k
27
154
1.5k
33
154
10k
46
154
Min
Max
Recommended
1K [1]
Open Circuit
5V
0
Open Circuit
120
70
168
470
88
168
1.5k
104
168
[1] Operation with Vdd= 3V and Rbias < 1K Ohm may result in the part becoming conditionally stable which is not recommended.
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
5.5 V
RF Input Power (RFIN)
(Vdd = +5 Vdc)
-5 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 21.2 mW/°C above 85 °C)
1.9 W
Thermal Resistance
(channel to ground paddle)
47.3 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Typical Supply
Current vs. Vdd (Rbias = 1.5k)
Vdd (V)
Idd1 (mA)
Idd2 (mA)
2.7
22
150
3.0
33
154
3.3
44
155
4.5
87
163
5.0
104
168
5.5
121
169
Amplifiers - Low Noise - SMT
v04.0610
Note: Amplifier will operate over full voltage ranges shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-6
HMC719LP4 / 719LP4E
v04.0610
Outline Drawing
Amplifiers - Low Noise - SMT
7
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC719LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC719LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H719
XXXX
H719
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
7-7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
Function
Description
1, 3 - 5, 7 - 16,
18, 20, 22
Pin Number
N/C
No connection necessary. These pins may be connected to
RF/DC ground without affecting performance.
2
RFIN
This pin is DC coupled
and matched to 50 Ohms.
6
RES
This pin is used to set the DC current of the amplifier by
selection of external bias resistor. See application circuit.
17
RFOUT
RF Output and DC BIAS for the second amplifier.
See Application Circuit for off-chip components.
19
RFIN2
This pin is DC coupled. An off-chip DC
blocking capacitor is required.
21
RFOUT1
This pin is matched to 50 Ohms.
23, 24
Vdd1, 2
Power Supply Voltage for the first amplifier. External bypass
capacitors are required. See application circuit.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
Amplifiers - Low Noise - SMT
7
Pin Descriptions
7-8
HMC719LP4 / 719LP4E
v04.0610
Application Circuit
Amplifiers - Low Noise - SMT
7
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
7-9
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC719LP4 / 719LP4E
v04.0610
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz
7
Amplifiers - Low Noise - SMT
Evaluation PCB
List of Materials for Evaluation PCB 121242
Item
J1 - J3
Description
PCB Mount SMA Connector
J4 - J5
2mm Vertical Molex Connector
C1, C8, C12
220 pF Capacitor, 0402 Pkg.
C3
10 nF Capacitor, 0402 Pkg.
C4, C7, C11
10 nF Capacitor, 0603 Pkg.
C5, C6, C13
1000 pF Capacitor, 0603 Pkg.
C10
4.7 uF Capacitor, 0805 Pkg.
L2
22 nH Inductor, 0402 Pkg.
L3
6.8 nH Inductor, 0603 Pkg.
L4
47 nH Inductor, 0603 Pkg.
R1
1.5 kOhm Rbias Resistor, 0402 Pkg.
R2, R3
0 Ohm Resistor, 0402 Pkg.
U1
HMC719LP4(E) Amplifier
PCB [2]
121126 Evaluation PCB
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25RF
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7 - 10
Similar pages