Roithner HP803WW 3w emitter power led sery Datasheet

HP-803xx 3W Emitter Power LED Series
Features
Highest Flux
Very long operating life ( life >> 50000 hr )
More Energy Efficient than Incandescent and most Halogen lamps
Low voltage DC operated
Instant light (less than 100 ns)
Superior ESD protection
Package Dimensions
O 7.40
Notes
1.
Drawings not to scale
2.
All dimensions are in millimeters .
3.
Tolerance is ±0.1mm unless otherwise noted.
4.
Protruded resin under flange is 1.0mm max.
5.
Lead spacing is measured where the leads emerge from the package.
6.
Specifications are subject to change without notice.
7.
Precautions for ESD:
STATIC SHIELD Electricity and surge damages the LED. It is recommended to use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be
properly grounded
Absolute Maximum Ratings at Ta=25C
Parameter
Symbol
Max
Unit
Power Dissipation
PD
3
W
Pulse Forward Current
IPF
1000
mA
Forward Current
IF
700
mA
Reverse Voltage
VR
5
V
Operating Temperature Range
Topr
- 40 to +85
C
Storage Temperature Range
Tstg
- 40 to + 85
C
Flux Characteristics at 700mA , Junction Temperature, TJ= 25C
Color
Model
Typ.(lumens)
Angle(degree)
White
HP803NW
55 lm
120
Warm White
HP803WW
45 lm
120
Blue
HP803NB
16 lm
120
Cyan
HP803CN
40 lm
120
Pure Green
HP803PG
55 lm
120
Amber
HP803NO
36 lm
120
Red
HP803NR
40 lm
120
Optical Characteristics at 700mA , Junction Temperature, TJ = 25C
Color
CCT / λD
λ
λ/T
7000K
--
--
3300K
3800K
--
--
460nm
470nm
475nm
25
0.04
Cyan
490nm
505nm
515nm
30
0.04
Pure Green
520nm
530nm
540nm
35
0.04
Amber
587nm
590nm
595nm
20
0.05
Red
620nm
625nm
645nm
20
0.05
Min.
Typ.
Max.
White
5000K
6000K
Warm White
2850K
Blue
Electrical Characteristics at 700mA , Junction Temperature, TJ = 25C
/W
Forward Voltage
Color
Thermal Resistance,
V/T
Min.
Typ.
Max.
White
3.8 v
4.0 v
4.2 v
15
-2.0
Warm White
3.8 v
4.0 v
4.2 v
15
-2.0
Blue
3.8 v
4.0 v
4.2 v
15
-2.0
Cyan
3.6 v
3.8 v
4.2 v
15
-2.0
Pure Green
3.6 v
3.8 v
4.2 v
15
-2.0
Amber
2.8 v
3.0 v
3.2 v
18
-2.0
Red
2.8 v
3.0 v
3.2 v
18
-2.0
Junction To Case
Notes
1.
Minimum luminous flux or radiometric power performance guaranteed within published operating
conditions. maintains a tolerance of ±10% on flux and power measurements
2.
Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the
perceived color. maintains a tolerance of± 1 nm for dominant wavelength measurements.
3.
CCT ±5% tester tolerance.
Precautions For Use
Over–current–proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause
big current change
Burn out will happen
Typical Electrical / Optical Characteristics Curves
Spectrum Distribution
Relative luminous intensity(%)
100
Blue
Yellow
Amber
Pure Blue
80
Green
Red
60
Cyan
40
20
0
400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720 740 760
Wavelength (nm)
Spectrum Distribution
Forward Current VS. Forward Voltage
800
Yellow/Red
600
400
Blue/Green
W hite
200
0
0
2.0
1.0
3.0
4.0
5.0
Relative Luminous Inttensity(%)
Forward Current IF (mA)
1000
Lum inous Intensity VS. Forward Current
125
100
75
50
25
0
0
200
Forward Voltage(VF) -Volts
400
600
800
1000
Forward Current IF (mA)
Radiation Diagram
Forward Current VS. Ambient Temperature
20¢X
1000
10¢X
0¢X
30¢X
750
40¢X
Yellow/Red
500
1.0
0.9
50¢X
Blue/Green
White
0.8
60¢X
250
0.7
70¢X
80¢X
0
0
50
100
150
Ambient Temperature (¢X
C)
200
90¢X
0.6
0.4
0.2
0 0.1
0.3
0.5
Reliability Test Items and Conditions
No.
Item
Test Conditions
Test time
Ac⁄Re
1
Solder Heat
260±5C
5 sec
0⁄1
2
Temperature Cycle
100cycle
0⁄1
3
Thermal Shock
20 cycle
0⁄1
4
High Temperature Storage
85C
1000 hrs
0⁄1
5
Low Temperature Storage
-35C
1000 hrs
0⁄1
6
DC Operating Life
IF 700mA
1000 hrs
0⁄1
7
High Temperature⁄High Humidity
Ta 60C R.H 90 .
1000 hrs
0⁄1
Judgment Criteria
-40C
25C
105C
25C
30 min
5 min
30 min
5 min
-40C
105C
5 min
5 min
Forward Voltage Vf
Vfmax Increase <1.2x
Reverse Current IR
IR max Increase <2x
Luminous Intensity Flux
Iv Decay < 50%
Note Measurement shall be taken after the tested samples have been returned to normal ambient conditions.
Soldering heat reliability DIP
Please refer to the following figure
Soldering heat 260¢ JMax.
5¢ Jwithin 5 sec
245¡ Ó
¢ J
Preheat
ROITHNER LASERTECHNIK, A-1040 Vienna, Austria, Wiedner Hauptstrasse 76, Top 9/1
Tel.: +43-1-586 52 43 - 0, Fax.: +43-1-586 52 43 44
e-mail: [email protected]
http://www.roithner-laser.com
Similar pages