HP HPWT-MH00 Super flux led Datasheet

H
Super Flux LEDs
Technical Data
Benefits
SunPower Series
HPWA-MH00 HPWT-MH00
HPWA-DH00 HPWT-DH00
HPWA-ML00 HPWT-ML00
HPWA-DL00 HPWT-DL00
HPWR-M300
• Fewer LEDs Required
• Lowers Total System Cost
• Small and Large Area
Displays
• Backlighting
Features
Description
• High Flux Output
• Designed for High Current
Operation
• Low Thermal Resistance
• Low Profile
• Meets SAE/ECE/JIS
Automotive Color
Requirements
• Packaged in Tubes for Use
with Automatic Pick and
Place Equipment
This revolutionary package design
allows the lighting designer to
reduce the number of LEDs
required and provide a more
uniform and unique illuminated
appearance than with existing
LED solutions. This is possible
through the package’s efficient
optical design and high-current
capabilities. The low profile
package can be easily coupled to
reflectors or lenses to efficiently
distribute light and provide the
desired illuminated appearance.
Applications
• Automotive Exterior
Lighting
• Moving Message Panels
This product family employs red,
red-orange, and amber LED
materials, which allow designers
to match the color of popular
lighting applications, such as
automotive tail, stop, and turn
signal lamps, and area displays.
Included in this family is the
world’s brightest amber LED
material, which is ideal for area
displays and general backlighting
applications.
Device Selection Guide
Part Number
HPWR-M300
HPWA-MH00
HPWA-DH00
HPWA-ML00
HPWA-DL00
HPWT-MH00
HPWT-DH00
HPWT-ML00
HPWT-DL00
LED Color
TS AlGaAs Red
AS AlInGaP Red-Orange
Total Flux
φv (mlm) @ 70 mA[1] Typ.
800
1250
AS AlInGaP Amber
1250
TS AlInGaP Red-Orange
2500
TS AlInGaP Amber
2500
Viewing Angle
2θ1/2 (Degrees) Typ.
90
90
60
90
60
70
40
70
40
Notes:
1. φV is the total luminous flux output as measured with an integrating sphere.
2. θ1/2 is the off axis angle from optical centerline where the luminous intensity is 1/2 the on-axis value.
5964-2064E
1-25
Outline Drawing
0.69 ± 0.20
2xR
(0.027 ± 0.008)
CHAMFER 1.25 x 1.25
(0.049 x 0.049)
C
CATHODE
C
7.62 ± 0.50
(0.300 ± 0.020)
φ 3.00 ± 0.20
ANODE
(0.118 ± 0.008)
A
A
7.62 ± 0.50
(0.300 ± 0.020)
5.0° TYP.
MX00
DX00
1.50 (0.059) OR 1.90 (0.075)
2.50 ± 0.50
(0.098 ± 0.020)
0.50 (0.020)
TYP.
4.40 ± 0.20
(0.173 ± 0.008)
1.55 ± 0.20 TYP.
(0.061 ± 0.008)
0.40 ± 0.20 TYP.
(0.016 ± 0.008)
0.76 ± 0.10 TYP.
(0.030 ± 0.004)
5.08 ± 0.30
(0.200 ± 0.012)
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. DIMENSIONS WITHOUT TOLERANCES ARE NOMINAL.
3. CATHODE LEADS ARE INDICATED WITH A "C" AND
ANODE LEADS ARE INDICATED WITH AN "A".
7.50 ± 0.20
(0.295 ± 0.008)
5.08 ± 0.20
(0.200 ± 0.008)
Absolute Maximum Ratings at TA = 25°C
Parameter
DC Forward Current[1]
Power Dissipation
Reverse Voltage (IR = 100 µA)
Operating Temperature Range
Storage Temperature
High Temperature Chamber
LED Junction Temperature
Solder Conditions
Preheat Temperature
Solder Temperature
HPWR-M300
70
161
10
-40 to +100
-55 to +100
HPWA-MX00/DX00
HPWT-MX00/DX00
[2,3]
70
70[2,3]
147
193
10
10
-40 to +100
-40 to +100
-55 to +100
-55 to +100
125°C, 2 hrs. max.
125°C
100°C
260°C for 5 seconds
[1.5 mm (0.06 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4a and 4b.
2. Drive Currents between 10 mA and 30 mA are recommended for best long term performance.
3. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
1-26
Units
mA
mW
V
°C
°C
Optical Characteristics at TA = 25°C
Peak
Wavelength
λpeak (nm)
Typ.
Color,
Dominant
Wavelength
λd (nm)[2]
Typ.
Total
Included
Angle θ0.90 V
(Degrees)[3]
Typ.
Luminous
Intensity/
Total Flux
Iv (mcd)/φv (mlm)
Typ.
Part Number
Total Flux
φv (mlm)
@ 70 mA[1]
Min. Typ.
HPWR-M300
500
800
655
643
95
0.7
HPWA-MH00
500
1250
621
615
95
0.6
75
0.85
HPWA-DH00
HPWA-ML00
500
1250
592
590
95
0.6
75
0.85
990
2500
626
617
100
0.6
70
1.25
100
0.6
70
1.25
HPWA-DL00
HPWT-MH00
HPWT-DH00
HPWT-ML00
990
2500
594
592
HPWT-DL00
Notes:
1. φv is the total luminous flux output as measured with an integrating sphere.
2. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ0.90 V is the included angle at which 90% of the total luminous flux is captured.
Electrical Characteristics at TA = 25°C
Part Number
HPWR-M300
HPWA-MH00/DH00
HPWA-ML00/DL00
HPWT-MH00/DH00
HPWT-ML00/DL00
Forward
Voltage
VF (Volts)
@ IF = 70 mA
Min. Typ. Max.
2.01
2.25
2.75
2.01
2.25 2.75
2.01
2.25 2.75
2.25
2.65
3.00
2.25
2.65
3.00
Reverse
Capacitance
Breakdown
C (pF)
Thermal
Speed of
VR (Volts)
VF = 0,
Resistance Response
@ IR = 100 µA f = 1 MHz RθJ-PIN (°C/W) τs (ns)[1]
Min.
Typ.
Typ.
Typ.
Typ.
10
20
20
155
45
10
20
40
155
13
10
20
40
155
13
10
20
40
125
13
10
20
40
125
13
Note:
1. ts is the time constant, e-t/τs.
1.0
70
HPWR-M300
HLMA-XX00
60
HPWA-XH00/
XH00
FORWARD CURRENT (mA)
RELATIVE INTENSITY
HPWA-XL00/
HPWT-XL00
RED
HPWT-XH00
0.5
REDORANGE
AMBER
HPWR-M300
50
40
30
HPWT-XX00
20
10
0
550
600
650
WAVELENGTH (nm)
Figure 1. Relative Intensity vs. Wavelength.
700
0
1.5
1.7
1.9
2.1
2.3
2.5
2.7
FORWARD VOLTAGE (V)
Figure 2. Forward Current vs.
Forward Voltage.
1-27
1.0
1.0
0.9
RθJ-A = 200° C/W
0.8
RELATIVE LUMINOUS FLUX
RELATIVE LUMINOUS FLUX
0.9
RθJ-A = 400° C/W
0.7
0.6
RθJ-A = 600° C/W
0.5
0.4
0.3
0.2
0.1
0
10
20
30
40
50
60
RθJ-A = 200° C/W
0.8
0.7
0.6
0.5
RθJ-A = 400° C/W
0.4
0.3
RθJ-A = 600° C/W
0.2
0.1
0
10
70
20
30
40
50
60
70
FORWARD CURRENT (mA)
Figure 3a. HPWR-M300 Relative
Luminous Flux vs. Forward Current.
Figure 3b. HPWA/HPWT-XX00
Relative Luminous Flux vs. Forward
Current.
MAXIMUM DC FORWARD CURRENT (mA)
MAXIMUM DC FORWARD CURRENT (mA)
FORWARD CURRENT (mA)
70
60
50
RθJ-A = 300° C/W
40
RθJ-A = 400° C/W
30 RθJ-A = 500° C/W
20
RθJ-A = 600° C/W
10
0
0
20
40
60
80
100
120
70
60
50
40 RθJ-A = 300° C/W
RθJ-A = 400° C/W
30
RθJ-A = 500° C/W
20
RθJ-A = 600° C/W
10
0
0
20
40
60
Figure 4a. HPWR-M300/HPWA-XX00
Maximum DC Forward Current vs.
Ambient Temperature.
1.0
RELATIVE LUMINOUS INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
80 70
60
50
40
30
20
10
0
10
20 30
40
50
60
70
80
OFF AXIS ANGLE (DEGREES)
Figure 5a. HPWR-M300, HPWA-MX00 Relative Luminous
Intensity vs. Off Axis Angle.
1-28
100
120
Figure 4b. HPWT-XX00 Maximum DC
Forward Current vs. Ambient
Temperature.
0.9
0
100 90
80
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
90 100
RELATIVE LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
OFF AXIS ANGLE (DEGREES)
Figure 5b. HPWT-MX00 Relative Luminous Intensity vs. Off Axis
Angle.
RELATIVE LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
OFF AXIS ANGLE (DEGREES)
Figure 5c. HPWA-DX00 Relative Luminous Intensity vs. Off
Axis Angle.
RELATIVE LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
OFF AXIS ANGLE (DEGREES)
Figure 5d. HPWT-DX00 Relative Luminous Intensity vs. Off
Axis Angle.
1-29
1.0
100
90
HPWA-DX00
0.8
% TOTAL LUMINOUS FLUX
% TOTAL LUMINOUS FLUX
0.9
0.7
0.6
0.5
HPWR-M300
HPWA-MX00
0.4
0.3
0.2
0.1
0
80
HPWT-DX00
70
60
50
HPWT-MX00
40
30
20
10
0
20
40
60
80
100
120
0
0
20
40
60
80
100
120
TOTAL INCLUDED ANGLE (DEGREES)
TOTAL INCLUDED ANGLE (DEGREES)
Figure 6a. HPWR-M300/HPWA-XX00
Percent Total Luminous Flux vs.
Total Included Angle.
Figure 6b. HPWT-XX00 Percent Total
Luminous Flux vs. Total Included
Angle.
1-30
Similar pages