Z-Power LED X10490 Technical Data Sheet Specification HR310 SSC Drawn Approval Customer Approval Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Contents 1. Features 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color & Binning 7. Outline Dimensions 8. Packing 9. Soldering 10. Precaution for use Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet HR310 HR310 Description Features 사진 This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This package LEDs are designed for high • High flux output and high luminance • Designed for high current operation • Uniform color • Low profile and low thermal resistance • Packaged in tubes current operation and high flux output for use with automatic application. But the package’s design insertion equipment features better thermal management characteristics than other LED solutions. Because of these advantages, this product have many applications. Such as automotive tail, stop and turn signal lamps, and electronic signs etc. Applications • Automotive exterior lighting • Electronic signs and signals • Channel letter / lighting • Decorative lighting • Specialty Lighting Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 2. Absolute Maximum Ratings ( Ta = 25ºC ) Item Symbol Value Unit DC Forward Current IF 70 mA Forward Peak Pulse Current IFP [1] 100 mA Reverse Voltage VR 5 V Power Dissipation PD 224 mW Operating Temperature Topr -40 ~ 100 ºC Storage Temperature Tstg -50 ~ 105 ºC Solder Temperature TS 260ºC for 5second [2] ºC Notes : [1] t ≤ 0.1ms, D = 1/10 [2] No closer than 1.5mm from the base of the stopper. 3. Electro-Optical Characteristics ( Ta = 25ºC, IF=70mA ) Item Symbol Luminous Flux [3] Value Unit Min. Typ. Max. ФV[4] 4.4 6.0 - lm Luminous Intensity IV - 10000 - mcd Dominant Wavelength[5] λd 615 625 630 nm Forward Voltage[6] VF - 2.6 3.0 V View Angle 2θ ½ 40 deg. Thermal Resistance RθJ-P 120 ºC /W Optical Efficiency ŋopt - 33 - lm/W Reverse Current (at VR = 5V) IR - - 5 µA Notes : [3] SSC maintains a tolerance of ±10% on flux and power measurements. [4] ФV is the total luminous flux output as measured with an integrated sphere. [5] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength. [6] A tolerance of ±0.05V on forward voltage measurements. Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 4. Reliability Tests Item Condition Note Failures Life Test Ta = RT, IF = 70mA 1000hrs 0/22 High Temperature Operating Ta = 100ºC, IF = 20mA 1000hrs 0/22 Low Temperature Operating Ta = -40ºC, IF = 70mA 1000hrs 0/22 Thermal Shock Ta = -50ºC (30min) ~ 105º (30min) (Transfer time : 5sec, 1Cycle = 1hr) 100 cycles 0/40 Resistance to soldering Heat Ts = 255 ± 5ºC, t = 4 ± 1sec 1 time 0/22 ESD (Human Body Model) 1kV, 1.5kΩ ; 100pF 1 time 0/22 High Temperature Storage Ta = 105ºC 1000hrs 0/22 Low Temperature Storage Ta = -50ºC 1000hrs 0/22 Temperature Humidity Storage Ta = 85ºC, RH = 85% 1000hrs 0/22 Temperature Humidity Operating Ta = 85ºC, RH = 85%, IF = 40mA 500hrs 0/22 < Judging Criteria For Reliability Tests > VF USL[1] X 1.2 IR USL X 2.0 ФV LSL [2] X 0.7 Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level. Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Ta= 25ºC 70 50 40 30 20 Ta= 25ºC 1.2 1.0 Relative Luminous Flux 60 Forward Current(mA) Z-Power LED X10490 Technical Data Sheet 5. Characteristic Diagrams o Rth(J-A) = 200 C/W o Rth(J-A) = 300 C/W o Rth(J-A) = 400 C/W o Rth(J-A) = 500 C/W 0.8 0.6 0.4 0.2 10 0 1.0 0.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 0 10 20 Forward Voltage [V] 50 60 Ta= 25ºC Dominant Wavelength [nm] 626 60 O Rth(J-A) : 300 C/W 40 O Rth(J-A) : 400 C/W O Rth(J-A) : 500 C/W 20 -20 0 20 40 60 80 100 120 O Ambient Temperature TA [ C] Ambient Temperature vs. Maximum Forward Current 624 622 620 618 616 0 20 40 60 80 100 Forward Current [mA] Forward Current vs. Dominant Wavelength Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 70 Forward Current vs. Relative Flux 80 Forward Current IF [mA] 40 Forward Current [mA] Forward Voltage vs. Forward Current 0 -40 30 Document No. : SSC-QP-7-07-24 (Rev.00) IF= 70mA 2.9 1.0 Forward Voltage [V] Relative Luminousity Flux Z-Power LED X10490 Technical Data Sheet IF= 70mA 1.2 0.8 0.6 0.4 0.2 0.0 2.8 2.7 2.6 2.5 0 20 40 60 80 100 0 20 Ta= 25ºC, IF= 70mA 1.0 Relative Luminous Intensity 0.5 600 Wavelength [nm] Spectrum 100 Ta= 25ºC, IF= 70mA 1.0 500 80 Ambient Temperature vs. Forward Voltage Ambient Temperature vs. Relative Flux Relative Emission Intensity 60 Ambient Temperature Ta[ C] Ambient Temperature Ta[ C] 0.0 400 40 o o 700 0.8 0.6 0.4 0.2 0.0 -90 -60 -30 0 30 60 90 Off Axis Angle [deg.] Directivity Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6. Color & Binning Bin Code Luminous Flux Dominant Wavelength Forward Voltage J 1 3 Luminous Flux (lm) @ IF = 70mA Dominant Wavelength (nm) @ IF = 70mA Forward Voltage (V) @ IF = 70mA Bin Code Min. Max. Bin Code Min. Max. Bin Code Min. Max. A 0.5 0.7 0 615 620 1 2.20 2.35 B 0.7 1.0 1 620 625 2 2.35 2.50 C 1.0 1.4 2 625 630 3 2.50 2.60 D 1.4 2.0 4 2.60 2.70 E 2.0 2.6 5 2.70 2.85 F 2.6 3.4 6 2.85 3.00 G 3.4 4.4 H 4.4 5.8 J 5.8 7.6 K 7.6 10.0 L 10.0 13.0 Available ranks Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 7. Outline Dimensions Unit : mm CHAMFER 1.25 X 1.25 3 ± 0.2 7.62 ± 0.5 CATHODE ANODE 7.62 ± 0.5 5.08 ± 0.3 7.5 ± 0.2 1.5±0.2 0.5 0.4 ± 0.2 1.4 MAX 2.5 ± 0.1 4.4 1.9 5.0° 0.76 ± 0.1 5.08 ± 0.2 Notes : Protruded epoxy is 1.0mm maximum. Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 8. Packing Unit : mm 9.7 5.8 12 0.6 2.5 5.1 2.6 DEVICE Cathode HR310 LOT NO. 20XX.XX.XX J14 CAT J14 QTY 60 D/C 07XX Anode SEOUL SEMICONDUCTOR CO., LTD. made in Korea Top view 485±1 Side view * Plastic tube 60pcs max/tube Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Unit : mm * Aluminum Sealing pack (in silica gel) 1200pcs max/pack (20tubes max/pack) HXXXX RANK : XXXX QTY : 1200pcs LOT : 20XX.XX.XX SEOUL SEMICONDUCTOR CO., LTD * Cardboard box (500x220x280) (21600pcs max/box) (18packs max/box) Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 9. Soldering Profile 1) Recommended Wave Soldering Conditions / Profile • Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max). • Soldering heat to be at 255 ºC (260ºC max) for 4 seconds (5 seconds max.) • Soak time above 200 ºC is 5 seconds 300 PEAK 250 255 ºC (260 ºC max) 200 O Temperature [ C] 4s (5s max) 150 PREHEAT 20s (60s Max) 100 85 ºC(120 ºC max) 50 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 T im e [s ] 2) Hand Soldering conditions • Not more than 3 seconds at max. 350ºC, under Soldering iron. 3) Caution • Lead frames are silver plated copper alloy. This substance has a low thermal coefficient (easily conducts heat) • No closer than 1.5mm from the base of the stopper. • The LEDs must not be repositioned after soldering. • Do not apply any stress to the lead particularly when heat. Note : In case the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 10. Precaution for Use 1) Storage • Before opening the package Avoid the absorption of moisture, we recommended to store High Flux LEDs in a dry box(or desiccator) with a desiccant . Otherwise, store them in the following environment: Temperature : 5℃~30℃ Humidity : 50% max. • After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40℃, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, Components should be dried for 10-12hr at 60±5℃ • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. • Avoid quick cooling • Leadframes are silver plated copper alloy. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Static Electricity • Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. • All devices, equipment and machinery must be properly grounded. It is recommended precautions be taken against surge voltage to the equipment that mounts the LEDs. 3) Heat Generation • Thermal is one of the important parameter to design the end product. Please consider the heat generation of the LEDs. • The operating current should be decided after considering the ambient maximum temperature of LEDs. Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 4) Others • The color of the LEDs is changed a little by an operating current and thermal. • Anti radioactive ray design is not considered for the products listed here in. • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. • When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5 • The appearance and specifications of the product may be modified for improvement without notice. SEOUL SEMICONDUCTOR CO., LTD. 148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL : +82-2-3281-6269 FAX :+82-2-858-5537 Homepage : www.seoulsemicon.com www.zled.com E-Store : www.zledstore.com E-mail : [email protected] Rev. 00 December 2007 www.ZLED.com <080407> Rev. 1.6 Document No. : SSC-QP-7-07-24 (Rev.00)