AVAGO HSMN-A431-T50M2 Surface mount led indicator Datasheet

HSMx-A43x-xxxxx
Surface Mount LED Indicator
Data Sheet
Description
Features
The Power PLCC-4 SMT LED with Lens are high-performance
PLCC-4 package size SMT LEDs targeted mainly in Automotive & Electronics Signs and Signals (ESS) markets. These
top-mount single-chip packages with focused radiation
offer high brightness in beam direction and are excellent
for interior automotive, indoor and outdoor sign and industrial applications. With additional lens in 30° variants, these
products are especially fitting to applications for traffic
lights, CHMSL and displays.
• Industry Standard PLCC-4
• High reliability LED package
• High brightness using AllnGaP and InGaN dice technologies
• High optical efficiency
• Narrow Viewing angle at 30°
• Available in 8mm carrier tape on 7-inch reel
• Compatible with both IR and TTW soldering process
The PLCC-4 package family is able to dissipate heat better
compared to the PLCC-2 packages. In proportion to this
increase in driving current, this family of LEDs is able to
produce higher light output compared to the conventional
PLCC-2 SMT LEDs.
Applications
As an extension of the standard flat top PLCC-4 SMT LEDs,
the Power PLCC-4 with Lens device is able to provide focused beams within narrow viewing angles (30°) meeting
the market’s requirements for focused radiation and high
brightness in beam directions.
The Power PLCC-4 SMT LED with 30° is ideal for panel, push
button, or general backlighting in automotive interior
& exterior, sign, office equipment, industrial equipment
and home appliances applications. This package design
coupled with careful selection of component materials allow the Power PLCC-4 SMT LED with Lens to perform with
higher reliability in a larger temperature range -40°C to
100°C. This high reliability feature is crucial to allow the
Power PLCC-4 SMT LED with Lens to do well in harsh environments such as its target Automotive & ESS markets. The
Power PLCC4 SMT LED with Lens package is also designed
to be compatible with both IR-solder re-flow and throughthe-wave soldering.
Interior automotive
•
•
•
•
•
•
Instrument panel backlighting
Central console backlighting
Cabin backlighting
Navigation and audio system
Dome lighting
Push button backlighting
Exterior automotive
•
•
•
•
Turn signals
CHMSL
Rear Combination Lamp
Side repeaters
Electronic signs and signals
• Interior and exterior full color sign
• Variable message sign
• Garden lighting
Office automation, home appliances, industrial equipment
• Front panel backlighting
• Push button backlighting
• Display backlighting
CAUTION: HSMN, HSMM-A43x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions
during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
The new Avago Technologies Power PLCC-4 SMT LED with
30° Lens will carry the part number HSMx- A43xxxxxx. The
high brightness AlInGaP and InGaN dice technologies
utilized will provide the product brightness that meets
the Automotive and ESS markets requirements. The Lens
package will complement and complete the existing AlInGap & InGaN color standard Power-PLCC-4 LED that Avago
Technologies offers, providing customers an extra Lens
option from one supplier.
To facilitate easy pick and place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel will be
shipped in single intensity and color bin (except for red
color), to provide close uniformity
Package Dimensions
Note: All dimensions in mm
Electrical connection between all cathodes is recommended
Device Selection Guide
Color
Part Number
Min. IV (mcd)
Typ. IV (mcd)
Max. IV (mcd)
Test Current
(mA)
Dice
Technology
Red
HSMC-A430-W50M1
1125.00
2300.00
3550.00
50
AlInGaP
HSMC-A431-X90M1
2240.00
4000.00
7150.00
50
AlInGaP
HSMJ-A430-W50M1
1125.00
2300.00
3550.00
50
AlInGaP
HSMJ-A431-X90M1
2240.00
4500.00
7150.00
50
AlInGaP
HSMV-A430-Y90M1
3500.00
6000.00
11250.00
50
AlInGaP
Orange
HSML-A431-X90M1
2240.00
4500.00
7150.00
50
AlInGaP
Amber
HSMA-A430-W90M1
1400.00
3000.00
4500.00
50
AlInGaP
HSMA-A431-Y00M1
2850.00
5000.00
-
50
AlInGaP
HSMA-A431-X90M1
2240.00
4700.00
7150.00
50
AlInGaP
Green
HSMM-A430-W90M2
1400.00
2400.00
4500.00
30
InGaN
Blue
HSMN-A430-U50M2
450.00
950.00
1400.00
30
InGaN
HSMN-A431-T50M2
285.00
360.00
900.00
30
InGaN
Red Orange
Notes:
1. The luminous intensity IV, is measured at the mechanical axis of the lamp package.
The actual peak of the spatial radiation pattern may not be aligned with this axis.
2. Iv tolerance ±12%
Part Numbering System
HSM x1 - A X2 X3 X4 - X5 X6 X7 X8 X9
Packaging Option
Colot Bin Selection
Intensity Bin Select
Device Specific Configuration
Package Type
LED Chip Color
Absolute Maximum Ratings (TA=25°C)
Parameters
HSMC/A
HSMV
HSMM/N
DC Forward Current [1]
70 mA
70 mA
30 mA
Peak Forward Current [2]
200 mA
200 mA
90 mA
Power Dissipation
180 mW
240 mW
114 mW
Reverse Voltage
5V
5V
4V
Junction Temperature
110 °C
Operating Temperature
- 40 °C to + 100 °C
Storage Temperature
- 40 °C to + 100 °C
Notes:
1. Derate linearly as shown in Figure 4.
2. Duty factor = 10%, Frequency = 1kHz
Optical Characteristics (TA = 25 °C)
Peak
Wavelength
lPEAK (nm)
Dominant Wavelength lD[1] (nm)
Viewing Angle
2q½ [2]
(Degrees)
Luminous
Efficacy
hV [3] (lm/W)
Typical
Typical
Typical
Typical
Color
Part Number
Dice
Technology
Red
HSMC-A43x
AlInGaP
635
626
30
150
Red
Orange
HSMJ-A43x
AlInGaP
621
615
30
240
HSMV-A430
AlInGaP
623
617
30
263
Orange
HSML-A431
AlInGaP
609
605
30
320
Amber
HSMA-A43x
AlInGaP
592
590
30
480
Green
HSMM-A430
InGaN
518
525
30
500
Blue
HSMN-A43X
InGaN
468
470
30
75
Notes:
1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. θ½ is the off-axis angle where the luminous intensity is ½ the peak intensity.
3. Radiant intensity, Ie in watts / steradian, may be calculated from the equation Ie = IV / ηV, where IV is the luminous intensity
in candelas and ηV is the luminous efficacy in lumens / watt.
Electrical Characteristics (TA = 25 °C)
Forward Voltage VF (Volts)@IF=50 mA
Reverse Voltage VR@100mA
Reverse Voltage VR@10mA
Part Number
Typical
Maximum
Minimum
Minimum
HSMC/J/L/A
2.2
2.5
5
-
HSMV
2.8
3.4
5
-
Forward Voltage VF (Volts)@IF=30 mA
Reverse Voltage VR@100mA
Reverse Voltage VR@10mA
Part Number
Typical
Maximum
Minimum
Minimum
HSMM/N
3.9
4.6
-
5
AlInGaP Orange
AlInGaP Amber
1
RELATIVE INTENSITY
AlInGaP Red Orange
InGaN
0.8
Green
0.6
InGaN
AlInGaP Red
Blue
0.4
0.2
0
380
430
480
530
580
WAVELENGTH - nm
Figure 1. Relative Intensity Vs. Wavelength
630
680
730
780
80
70
HSMV
FORWARD CURRENT - mA
HSMC/J/L/A
60
50
40
30
20
HSMM/N
10
0
0
1
2
3
4
5
FORWARD VOLTAGE - V
1.4
1.2
1.2
1.0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 30 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 50 mA)
Figure 2. Forward Current Vs. Forward Voltage
1.0
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75
DC FORWARD CURRENT - mA
0
5
10
15
20
25
DC FORWARD CURRENT - mA
Figure 3a. Relative Intensity Vs. Forward Current (AlInGaP).
Figure 3b. Relative Intensity Vs. Forward Current (InGaN).
Figure 4a. Maximum Forward Current Vs. Ambient Temperature.
Derated Based on TJmax= 110°C (AlInGaP)
Figure 4b. Maximum Forward Current Vs. Ambient Temperature.
Derated Based on TJmax= 110°C (InGaN)
30
35
1
0.9
NORMALIZED INTENSITY
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90
-60
-30
0
30
60
90
ANGULAR DISPLACEMENT - DEGREES
Figure 5. Radiation Pattern
X
2.60
(0.103)
X
0.40 (0.016)
1.10
(0.043)
0.50
(0.020)
Y
4.50 (0.178)
1.50 (0.059)
Y
DIMENSIONS IN mm (INCHES).
SOLDER RESIST
REPRESENTS ELECTRICAL
CONNECTIVITY BETWEEN PADS
Figure 6a. Recommended Soldering Pad Pattern (IR Reflow).
X
X
0.5 (0.020)
6.1 (0.240)
2.8 (0.110)
Y
2.0 (0.079)
6.0 (0.236)
3.0 (0.118)
DIMENSIONS IN mm (INCHES).
Figure 6b. Recommended Soldering Pad Pattern (TTW).
1.0 (0.039)
2.0 (0.079)
Y
SOLDER RESIST
REPRESENTS ELECTRICAL
CONNECTIVITY BETWEEN PADS
Figure 7. Soft Tip Vacuum Pick-up Tool for Extracting SMT LED Components from Carrier Tape.
TEMPERATURE
10 to 20 SEC.
217˚C
255 ˚C +5˚C
-0˚C
-6˚C/SEC MAX.
3˚C/SEC MAX.
125˚C +/- 25˚C
60-150 SEC.
MAX. 120 SEC.
TIME
Figure 8a. Recommended SnPb Reflow Soldering Profile
Figure 8b. Recommended Pb-free Reflow Soldering Profile.
Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT
LED Indicator Components.
Figure 9. Recommended Wave Soldering Profile.
TRAILER
COMPONENT
LEADER
480 mm MIN. FOR ∅ 180 REEL.
960 mm MIN. FOR ∅ 330 REEL.
200 mm MIN. FOR ∅ 180 REEL.
200 mm MIN. FOR ∅ 330 REEL.
C
A
USER FEED DIRECTION
Figure 10. Tape Leader and Trailer Dimensions
Figure 11. Tape Dimensions
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 12. Reeling Orientation.
Moisture Sensitivity
Intensity Bin Select (X5X6)
This product is qualified as Moisture Sensitive Level 2a per
Jedec J-STD-020. Precautions when handling this moisture
sensitive product is important to ensure the reliability of
the product. Do refer to Avago Application Note AN5305
Handling of Moisture Sensitive Surface Mount Devices for
details.
Individual reel will contain parts from one half bin only
A. Storage before use
X5
Min Iv Bin
X6
0
Full Distribution
3
3 half bins starting from X51
- Unopen moisture barrier bag (MBB) can be stored at
<40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking
is not required, then it is safe to reflow the LEDs per the
original MSL rating.
4
4 half bins starting from X51
5
5 half bins starting from X51
7
3 half bins starting from X52
8
4 half bins starting from X52
- It is not recommended to open the MBB prior to assembly (e.g. for IQC).
9
5 half bins starting from X52
B. Control after opening the MBB
Intensity Bin Limits
- The humidity indicator card (HIC) shall be read immediately upon opening of MBB.
Bin ID
Min (mcd)
Max (mcd)
W1
1125.00
1400.00
- The LEDs must be kept at <30°C / 60%RH at all time and
all high temperature related process including soldering, curing or rework need to be completed within 672
hours.
W2
1400.00
1800.00
X1
1800.00
2240.00
X2
2240.00
2850.00
Y1
2850.00
3550.00
Y2
3550.00
4500.00
Z1
4500.00
5600.00
Z2
5600.00
7150.00
11
7150.00
9000.00
12
9000.00
11250.00
21
11250.00
14000.00
22
14000.00
18000.00
C. Control for unfinished reel
- For any unuse LEDs, they need to be stored in sealed
MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected to
other high temperature processes, the PCB need to be
stored in sealed MBB with desiccant or desiccator at
<5%RH to ensure no LEDs have exceeded their floor life
of 672 hours.
E. Baking is required if:
- “10%” or “15%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60% RH at
any time.
- The LEDs floor life exceeded 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
Tolerance of each bin limit = ± 12%
Color Bin Select (X7)
Green
Min. (nm)
Max. (nm)
Individual reel will contain parts from 1 full bin only
A
515.0
520.0
B
520.0
525.0
X7
0
Full Distribution
C
525.0
530.0
Z
A and B only
D
530.0
535.0
Y
B and C only
W
C and D only
Amber
Min. (nm)
Max. (nm)
V
D and E only
A
582.0
584.5
U
E and F only
B
584.5
587.0
T
F and G only
C
587.0
589.5
S
G and H only
D
589.5
592.0
Q
A, B and C only
E
592.0
594.5
P
B, C and D only
F
594.5
597.0
N
C, D and E only
M
D, E and F only
L
E, F and G only
K
F, G and H only
1
A, B, C and D only
2
E, F G and H only
Red
Min. (nm)
Max. (nm)
Full Distribution
Tolerance of each bin limit = ±1nm
Packaging Option (X8X9)
Color Bin Limits
Option
Test Current
Package Type
Reel Size
M1
50mA
Top Mount
13 inch
M2
30mA
Top Mount
13 inch
Blue
Min. (nm)
Max. (nm)
A
460.0
465.0
B
465.0
470.0
C
470.0
475.0
Forward Voltage Bin Table
D
475.0
480.0
For HSMV – A43x-xxxxx only
Bin
Min.
Max.
Cyan
Min. (nm)
Max. (nm)
VA
1.9
2.2
A
490.0
495.0
VB
2.2
2.5
B
495.0
500.0
VC
2.5
2.8
C
500.0
505.0
VD
2.8
3.1
D
505.0
510.0
VE
3.1
3.4
Tolerance for each bin limit = ± 0.1V
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0313EN
AV02-0208EN - August 29, 2007
Similar pages