HSMx-C680 Right Angle Surface Mount ChipLEDs Data Sheet Description Features The HSMx-C680 series of chip-type LEDs are designed to illuminate at a right angle to the direction of mounting. When mounted on a PC board, these devices will emit light in a direction parallel to the board. • Right Angle Mounting The small 3.0 x 1.0 x 2.0mm footprint of the HSMx-C680 is designed for applications where space is limited. These devices are available in four colors and use untinted, nondiffused optics. The HSMx-C680 series of parts are compatible with IR reflow soldering process only. 3.0 0.3 Applications • LCD backlighting • Keypad Side/Backlighting • Light Piping Part Number 0.3 2.0 2.0 1.0 Parts per Reel Color HSMA-C680 3000 AlInGaP Amber HSMC-C680 3000 AlInGaP Red HSMG-C680 3000 GaP Green HSMH-C680 3000 AS AlGaAs Red HSML-C680 3000 AlInGaP Orange HSMS-C680 3000 GaP High Efficiency Red, HER HSMY-C680 3000 GaP Yellow 0.25 0.88 POLARITY MARK • Available in 8 mm Tape on 178mm (7”) Diameter Reels Device Selection Guide 1.0 CATHODE (ANODE FOR HSMH-C680) • Available in a Wide Variety of Colors • Right Angle Indicator Package Dimensions 0.25 • Compatible with IR Reflow Soldering Process ANODE (CATHODE FOR HSMH-C680) R 0.45 TO REINFORCE SOLDERING (NON-PIN CONNECTION) CATHODE ANODE CAUTION: HSMx-C680 LEDs are Class 1A ESD sensitive per JESD22-A114C.01 standard. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. Absolute Maximum Ratings at TA = 25°C Parameter AlInGaP GaP AS AlGaAs Units DC Forward Current 30 25 25 mA Power Dissipation 72 65 65 mW Reverse Voltage (IR = 100mA) 5 5 5 V LED Junction Temperature 95 95 95 °C Operating Temperature Range -40 to 85°C Storage Temperature Range -40 to 85 °C Soldering Temperature See reflow soldering profile (Figure 6 & 7) Electrical Characteristics at TA = 25°C Forward Voltage VF (Volts) [1] @ IF = 20mA Reverse Breakdown VR (Volts) @ IR = 100mA Thermal Resistance RqJ-P (°C/W) Part Number Typ. Max. Typ. Typ. AlInGaP Amber 2.0 2.4 5 500 AlInGaP Red 2.0 2.4 5 500 GaP Green 2.2 2.6 5 300 AS AlGaAs Red 1.8 2.6 5 300 AlInGaP Orange 2.0 2.4 5 500 GaP HER 2.0 2.6 5 300 GaP Yellow 2.1 2.6 5 300 Notes: 1. VF tolerance : ±0.1V Optical Characteristics at TA = 25°C Luminous Intensity IV [1] (mcd) @ 20mA Part Number Min. Typ. Color, Dominant Wavelength ld [2] (nm) Typical Color, Peak Wavelength lPeak [(nm) Typical Viewing Angle 2q1/2 [3] (Degrees) Typical AlInGaP Amber 28.5 76.9 591 594 115 AlInGaP Red 28.5 62.3 630 643 115 GaP Green 4.5 13.3 573 568 125 AS AlGaAs Red 7.2 30.7 642 657 125 AlInGaP Orange 28.5 108.6 604 611 115 GaP HER 2.8 5.1 621 636 125 GaP Yellow 2.8 9.3 589 588 125 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED package. 2. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. q1/2 is the off-axis angle where the luminous intensity is ½ the peak intensity. 2 Color Bin Limits [1] GaP HER AlIn GaP Amber Bin ID Dominant Wavelength (nm) Minimum Maximum A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Tolerance : ±1nm AlInGaP Red Bin ID - Dominant Wavelength (nm) Minimum Maximum 620.0 635.0 Bin ID - Dominant Wavelength (nm) Minimum Maximum 620.0 635.0 Tolerance : ± 1nm GaP Yellow Bin ID Dominant Wavelength (nm) Minimum Maximum A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Tolerance : ±1nm Tolerance : ±1nm Notes: GaP Green 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins. Bin ID Dominant Wavelength (nm) Minimum Maximum A 561.5 564.5 B 564.5 567.5 C 567.5 570.5 D 570.5 573.5 E 573.5 576.5 Tolerance : ± 1nm AS AlGaAs HER Bin ID - Dominant Wavelength (nm) Minimum Maximum 630.0 650.0 Tolerance : ±1nm AlInGaP Orange Bin ID A 597.0 600.0 B 600.0 603.0 C 603.0 606.0 D 606.0 609.0 E 609.0 612.0 F 612.0 615.0 Tolerance : ± 1nm 3 Dominant Wavelength (nm) Minimum Maximum Light Intensity (IV) Bin Limits [1] Bin ID Intensity (mcd) Minimum Maximum H 2.80 4.50 J 4.50 7.20 K 7.20 11.20 L 11.20 18.00 M 18.00 28.50 N 28.50 45.00 P 45.00 71.50 Q 71.50 112.50 Tolerance : ±15% Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins. 1.0 1.0 0.9 0.7 RELATIVE INTENSITY 0.8 RELATIVE INTENSITY 0.9 AlInGaP Orange AlInGaP Amber 0.6 AlInGaP Red 0.5 0.4 0.3 0.8 0.7 0.6 0.3 0.1 0.1 530 580 630 680 WAVELENGTH - nm 730 AS AlGaAs 0.4 0.2 480 GaP Green 0.5 0.2 0.0 0.0 380 780 GaP HER GaP Yellow 430 480 530 580 630 WAVELENGTH - nm 680 730 780 Figure 1. Relative intensity vs. wavelength.. 100 FORWARD CURRENT - mA FORWARD CURRENT - mA 100 AlInGaP Red 10 AlInGaP Amber & Orange 1 10 GaP Green GaP Yellow 1 GaP HER AS AlGaAs Red 0.1 0 1 2 3 0.1 1.5 1.7 FORWARD VOLTAGE - V 1.9 2.1 2.3 2.5 FORWARD VOLTAGE - V 1.4 1.4 1.2 1.2 1 AlInGaP Orange 0.8 AlInGaP Red & Amber 0.6 0.4 0.2 0 0 5 10 15 20 25 DC FORWARD CURRENT - mA Figure 3. Luminous intensity vs. forward current. 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) Figure 2. Forward current vs. forward voltage. 30 1 GaP & AlGaAs 0.8 0.6 0.4 0.2 0 0 5 10 15 20 DC FORWARD CURRENT - mA 25 30 30 30 25 FORWARD CURRENT – mA MAXIMUM FORWARD CURRENT - mA 35 25 20 AlInGaP 15 10 5 0 0 20 40 60 80 AMBIENT TEMPERATURE - °C 20 15 10 5 0 100 0 20 60 40 80 100 AMBIENT TEMPERATURE – °C Figure 4. Maximum forward current vs. ambient temperature. 10 - 30 SEC. TEMPERATURE TEMPERATURE 10 SEC. MAX. 230 C MAX. 4 C/SEC. MAX. 140-160 C –3 C/SEC. MAX. 4 C/SEC. MAX. OVER 2 MIN. TIME Figure 5.. Recommended reflow soldering profile. 217 °C 200 °C 255 - 260 °C 3 °C/SEC. MAX. 6 °C/SEC. MAX. 150 °C 3 °C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME Figure 6. Recommended Pb-free reflow soldering profile. EMITTED DIRECTION Figure 7. Recommended soldering land pattern. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1mm (±0.004in.) unless otherwise specified. 5 (Acc. to J-STD-020C) USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 8. Reeling orientation. 8.0 ± 1.0 (0.315 ± 0.039) Ø 20.20 MIN. (Ø 0.795 MIN.) 10.50 ± 1.0 (0.413 ± 0.039) Ø 13.1 ± 0.5 (Ø 0.516 ± 0.020) 3.0 ± 0.5 (0.118 ± 0.020) 59.60 ± 1.00 (2.346 ± 0.039) 178.40 ± 1.00 (7.024 ± 0.039) 4.0 ± 0.5 (0.157 ± 0.020) Figure 9. Reel dimensions. 6 6 PS 5.0 ± 0.5 (0.197 ± 0.020) 4.00 ± 0.10 (0.157 ± 0.004) 1.50 + 0.100 Ø (0.059 + 0.004) 1.20 CATHODE 0.20 1.75 ± 0.10 (0.069 ± 0.004) 3.50 ± 0.05 (0.138 ± 0.002) DIM. A (SEE TABLE) DIM. B (SEE TABLE) 8.00 ± 0.30 (0.315 ± 0.012) USER FEED DIRECTION Ø1.1 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) TABLE 1 DIM. A DIM. B DIM. C PART NUMBER ± 0.10 (0.004) ± 0.10 (0.004) ± 0.10 (0.004) HSMx-C680 3.35 (0.132) 2.30 (0.091) 1.20 (0.047) DIMENSIONS IN MILLIMETERS (INCHES) Figure 10. Carrier Tape Dimensions END THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS Figure 11. Tape leader and trailer dimensions. 7 THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. 150 mm-360 mm (5.9 - 14.2 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Reflow Soldering: For more information on reflow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator Components. Storage Condition: 5 to 30°C @ 60%RH max. Baking is required before mounting, if: 1. Humidity Indicator Card is > 10% when read at 23 ± 5°C. 2. Device expose to factory conditions <30°C/60%RH more than 672 hours Recommended baking condition: 60±5°C for 20 hours. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0481EN - May 26, 2011