HP HSMY-T500 Surface mount led indicator Datasheet

H
Surface Mount LED Indicator
HSMD-TX00
HSME-TX00
HSMG-TX00
HSMH-TX00
HSMS-TX00
HSMY-TX00
Technical Data
Features
Description
• Compatible with Automatic
Placement Equipment
• Compatible with Infrared
and Vapor Phase Reflow
Solder Processes
• Packaged in 12 mm or 8 mm
tape on 7" or 13" Diameter
Reels
• EIA Standard Package
• Low Package Profile
• Nondiffused Package
Excellent for Backlighting
and Coupling to Light Pipes
These solid state surface mount
indicators are designed with a flat
top and sides to be easily handled
by automatic placement
equipment. A glue pad is provided
for adhesive mounting processes.
They are compatible with
convective IR and vapor phase
reflow soldering and conductive
epoxy attachment processes.
The package size and configuration conform to the EIA-535
BAAC standard specification for
case size 3528 tantalum
capacitors. The folded leads
permit dense placement and
provide an external solder joint
for ease of inspection.
These devices are nondiffused,
providing high intensity for
applications such as backlighting,
light pipe illumination, and front
panel indication.
Device Selection Guide
DH AS
AlGaAs
Red
HSMHT400
High
Efficiency
Red
HSMST400
Orange
HSMDT400
T500
T500
T600
T700
1-204
Yellow
HSMYT400
High
Performance
Green
HSMGT400
Emerald
Green
HSMET400
T500
T500
T500
T500
T600
T600
T600
T600
T600
T700
T700
T700
T700
T700
Description
12 mm Tape, 7" Reel,
2000 Devices
12 mm Tape, 13" Reel,
8000 Devices
8 mm Tape, 7" Reel,
2000 Devices
8 mm Tape, 13" Reel,
8000 Devices
5964-9359E
Package Dimensions
3.5 ± 0.2
(0.138 ± 0.008)
2.8 ± 0.2
(0.110 ± 0.008)
2.7 NOM.
(0.106)
2.2 NOM.
(0.087)
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. THE LEADS ARE COPPER ALLOY, 85% Sn/15% Pb PLATING.
CATHODE NOTCH
3.1 NOM.
(0.122)
1.9 ± 0.2
(0.075 ± 0.008)
0.7 MIN.
(0.028)
0.1
(0.004)
NOM.
0.8 ± 0.3
(0.031 ± 0.012)
(2 PLACES)
2.2 ± 0.1
(0.087 ± 0.004)
1.3
(0.050)
MIN.
Tape and Reel
Specifications
Hewlett Packard surface mount
LEDs are packaged tape and reel
in accordance with EIA-481A,
Taping of Surface Mount
Components for Automatic
Placement. This packaging
system is compatible with tapefed automatic pick and place
systems. Each reel is sealed in a
vapor barrier bag for added
protection. Bulk packaging in
vapor barrier bags is available
upon special request.
USER FEED
DIRECTION
CATHODE
PITCH: 4 mm (0.157 IN.)
p
h
T
T
E D
L R
W A
E K
H C
A
P
REEL DIAMETER:
178 mm (7 IN.) OR 330 mm (13 IN.)
CARRIER TAPE WIDTH:
12 mm (0.472 IN.) OR 8 mm (0.315 IN.)
1-205
Absolute Maximum Ratings at TA = 25°C
DH AS
AlGaAs
Red
High
Efficiency
Red
Orange
DC Forward
Current[1]
30
30
Peak Forward
Current[2]
300
Average
Forward
Current[2]
20
Parameter
LED Junction
Temperature
Transient
Forward
Current[3]
(10 µs Pulse)
Reverse Voltage
(IR = 100 mA)
Operating
Temperature
Range
Storage
Temperature
Range
Reflow Soldering
Temperature
Convective IR
Vapor Phase
Yellow
High
Perf.
Green
Emerald
Green
Units
30
30
30
30
mA
90
90
60
90
90
mA
25
25
20
25
25
mA
95
°C
500
mA
5
V
-40 to +85
-40 to +85
-20 to +85
°C
°C
235°C Peak, above 185°C for 90 seconds.
215°C for 3 minutes.
Notes:
1. Derate dc current linearly from 50°C: For AlGaAs red, high efficiency red, and green devices at 0.67 mA/°C. For yellow devices at
0.44 mA/°C.
2. Refer to Figure 5 showing Maximum Tolerable Peak Current vs. Pulse duration to establish pulsed operating conditions.
3. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and
wire bond. The device should not be operated at peak currents above the Absolute Maximum Peak Forward Current.
1-206
Electrical/Optical Characteristics at TA = 25°C
DH AS AlGaAs Red HSMH-TX00
Parameter
Symbol
Min.
Typ.
Luminous Intensity
Iv
9.0
17.0
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Units
Test Conditions
mcd
IF = 10 mA
V
IF = 10 mA
15.0
V
IR = 100 µA
1.8
5.0
Max.
2.2
Included Angle Between
Half Intensity Points[1]
2θ1/2
120
deg.
Peak Wavelength
λPEAK
645
nm
λd
637
nm
∆λ1/2
20
nm
Speed of Response
τs
30
ns
Time Constant, e-t/τs
Capacitance
C
30
pF
VF = 0, f = 1 MHz
RθJ-pin
180
°C/W
ηv
80
lm/W
Dominant
Wavelength[2]
Spectral Line Half Width
Thermal Resistance
Luminous
Efficacy[3]
Junction-to-Cathode
High Efficiency Red HSMS-TX00
Parameter
Symbol
Min.
Typ.
Luminous Intensity
Iv
2.0
6.0
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Units
Test Conditions
mcd
IF = 10 mA
V
IF = 10 mA
30.0
V
IR = 100 µA
1.9
5.0
Max.
2.5
Included Angle Between
Half Intensity Points[1]
2θ1/2
120
deg.
Peak Wavelength
λPEAK
635
nm
λd
626
nm
∆λ1/2
40
nm
Speed of Response
τs
90
ns
Time Constant, e-t/τs
Capacitance
C
11
pF
VF = 0, f = 1 MHz
RθJ-pin
160
°C/W
ηv
145
lm/W
Dominant
Wavelength[2]
Spectral Line Half Width
Thermal Resistance
Luminous
Efficacy[3]
Junction-to-Cathode
Notes:
1. θ1/2 is the off-axis angle where the luminous intensity is half the on-axis value.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ ηv, where Iv is the luminous intensity in
candelas and ηv is luminous efficacy in lumens/watt.
1-207
Orange HSMD-TX00
Parameter
Symbol
Min.
Typ.
Luminous Intensity
Iv
1.5
5.0
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Units
Test Conditions
mcd
IF = 10 mA
V
IF = 10 mA
30.0
V
IR = 100 µA
1.9
5.0
Max.
2.5
Included Angle Between
Half Intensity Points[1]
2θ1/2
120
deg.
Peak Wavelength
λPEAK
600
nm
Dominant Wavelength[2]
λd
602
nm
Spectral Line Half Width
∆λ1/2
40
nm
Speed of Response
τs
260
ns
Time Constant, e-t/τ s
Capacitance
C
4
pF
VF = 0, f = 1 MHz
RθJ-pin
160
°C/W
ηv
380
lm/W
Thermal Resistance
Luminous
Efficacy[3]
Junction-to-Cathode
Yellow HSMY-TX00
Parameter
Symbol
Min.
Typ.
Luminous Intensity
Iv
2.0
5.0
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Units
Test Conditions
mcd
IF = 10 mA
V
IF = 10 mA
50.0
V
IR = 100 µA
2.0
5.0
Max.
2.5
Included Angle Between
Half Intensity Points[1]
2θ1/2
120
deg.
Peak Wavelength
λPEAK
583
nm
Dominant Wavelength[2]
λd
585
nm
Spectral Line Half Width
∆λ1/2
36
nm
Speed of Response
τs
90
ns
Time Constant, e-t/τ s
Capacitance
C
15
pF
VF = 0, f = 1 MHz
Thermal Resistance
RθJ-pin
160
°C/W
Luminous Efficacy[3]
ηv
500
lm/W
Junction-to-Cathode
Notes:
1. θ1/2 is the off-axis angle where the luminous intensity is half the on-axis value.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ ηv, where Iv is the luminous intensity in
candelas and ηv is luminous efficacy in lumens/watt.
1-208
High Performance Green HSMG-TX00
Parameter
Symbol
Min.
Typ.
Luminous Intensity
Iv
4.0
10.0
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Units
Test Conditions
mcd
IF = 10 mA
V
IF = 10 mA
50.0
V
IR = 100 µA
2.0
5.0
Max.
2.5
Included Angle Between
Half Intensity Points[1]
2θ1/2
120
deg.
Peak Wavelength
λPEAK
570
nm
Dominant Wavelength[2]
λd
572
nm
Spectral Line Half Width
∆λ1/2
28
nm
Speed of Response
τs
500
ns
Time Constant, e-t/τ s
Capacitance
C
18
pF
VF = 0, f = 1 MHz
RθJ-pin
160
°C/W
ηv
595
lm/W
Thermal Resistance
Luminous
Efficacy[3]
Junction-to-Cathode
Notes:
1. θ1/2 is the off-axis angle where the luminous intensity is half the on-axis value.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ ηv, where Iv is the luminous intensity in
candelas and ηv is luminous efficacy in lumens/watt.
Emerald Green HSME-TX00
Parameter
Symbol
Min.
Typ.
Luminous Intensity
Iv
1.0
1.5
Forward Voltage
VF
Reverse Breakdown Voltage
VR
Units
Test Conditions
mcd
IF = 10 mA
V
IF = 10 mA
50.0
V
IR = 100 µA
2.2
5.0
Max.
2.27
Included Angle Between
Half Intensity Points[1]
2θ1/2
120
deg.
Peak Wavelength
λPEAK
558
nm
λd
560
nm
∆λ1/2
28
nm
Speed of Response
τs
500
ns
Time Constant, e-t/τ s
Capacitance
C
52
pF
VF = 0, f = 1 MHz
Thermal Resistance
RθJ-pin
120
°C/W
Luminous Efficacy[3]
ηv
680
lm/W
Dominant
Wavelength[2]
Spectral Line Half Width
Junction-to-Cathode
Notes:
1. θ1/2 is the off-axis angle where the luminous intensity is half the on-axis value.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ ηv, where Iv is the luminous intensity in
candelas and ηv is luminous efficacy in lumens/watt.
4. Refer to Application Note 1061 for information comparing high performance green with emerald green light output degradation.
1-209
1.0
ORANGE
RELATIVE INTENSITY
EMERALD GREEN
TA = 25° C
DH AlGaAs RED
HIGH
PERFORMANCE
GREEN
HIGH EFFICIENCY RED
0.5
YELLOW
0
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative Intensity vs. Wavelength.
HER, ORANGE, YELLOW,
HIGH PERFORMANCE GREEN
AND EMERALD GREEN
90
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
GREEN
EMERALD GREEN
80
I F – FORWARD CURRENT – mA
I F – FORWARD CURRENT – mA
DH AS AlGaAs RED
0
0.5
1.0
1.5
2.0
2.5
70
60
50
40
HIGH
EFFICIENCY
RED, ORANGE
30
20
10
0
0
3.0
YELLOW
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
V F – FORWARD VOLTAGE – V
V F – FORWARD VOLTAGE – V
Figure 2. Forward Current vs. Forward Voltage.
HER, ORANGE, YELLOW,
HIGH PERFORMANCE GREEN
AND EMERALD GREEN
DH AS AlGaAs RED
4.0
2.5
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10 mA)
3.0
2.0
1.5
1.0
0.5
0.0
YELLOW
2.0
HIGH
EFFICIENCY
RED, ORANGE
1.0
0.0
0
5
10
15
20
25
30
IF – DC FORWARD CURRENT – mA
Figure 3. Relative Luminous Intensity vs. Forward Current.
1-210
GREEN
EMERALD GREEN
3.0
0
5
10
15
20
25
I – DC FORWARD CURRENT – mA
F
30
HER, ORANGE, YELLOW,
HIGH PERFORMANCE GREEN
AND EMERALD GREEN
ηv – RELATIVE EFFICIENCY
(NORMALIZED AT 10 mA)
1.5
1.4
YELLOW
1.3
1.2
1.1
1.0
0.9
GREEN
HIGH EFFICIENCY
RED, ORANGE
EMERALD GREEN
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
10
20
30
40
50
60
70
80
90
IPEAK – PEAK FORWARD CURRENT – mA
Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.
HER, ORANGE, YELLOW,
HIGH PERFORMANCE GREEN
AND EMERALD GREEN
Figure 5. Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX per MAX Ratings).
Figure 6. Relative Intensity vs. Angular Displacement.
1-211
Similar pages