Holtek HT7130-2 30ma low power ldo Datasheet

HT71xx-2
30mA Low Power LDO
Features
General Description
• Low power consumption
The HT71xx-2 series is a set of three-terminal low
power high voltage regulators implemented in CMOS
technology. They allow input voltages as high as 30V.
They are available with several fixed output voltages
ranging from 2.1V to 5.0V. CMOS technology ensures
low voltage drop and low quiescent current.
• Low voltage drop
• Low temperature coefficient
• High input voltage (up to 30V)
• Output voltage accuracy: tolerance ±1%
• TO92, SOT89 and SOT23-5 package
Although designed primarily as fixed voltage
regulators, these devices can be used with external
components to obtain variable voltages and currents.
Applications
• Battery-powered equipment
• Communication equipment
• Audio/Video equipment
Selection Table
Part No.
Output Voltage
HT7121-2
2.1V
HT7123-2
2.3V
HT7125-2
2.5V
HT7127-2
2.7V
HT7130-2
3.0V
HT7133-2
3.3V
HT7136-2
3.6V
HT7144-2
4.4V
HT7150-2
5.0V
Package
Marking
TO92
SOT89
SOT23-5
71xxA-2 (for TO92)
71xx-2 (for SOT89)
1xx2 (for SOT23-5)
Note: ″xx″ stands for output voltages.
Rev. 1.00
1
April 10, 2013
HT71xx-2
Block Diagram
Pin Assignment
Absolute Maximum Ratings
Operating Temperature .........................−40°C to 85°C
Supply Voltage ....................................... −0.3V to 33V
Storage Temperature ...........................−50°C to 125°C
Note: These are stress ratings only. Stresses exceeding the range specified under ″Absolute Maximum Ratings″
may cause substantial damage to the device. Functional operation of this device at other conditions beyond
those listed in the specification is not implied and prolonged exposure to extreme conditions may affect
device reliability.
Thermal Information
Symbol
θJA
PD
Parameter
Thermal Resistance (Junction to Ambient)
(Assume no ambient airflow, no heat sink)
Power Dissipation
Package
Max.
Unit
SOT23-5
500
°C/W
SOT89
200
°C/W
TO92
200
°C/W
SOT23-5
0.20
W
SOT89
0.50
W
TO92
0.50
W
Note: PD is measured at Ta = 25°C
Rev. 1.00
2
April 10, 2013
HT71xx-2
Electrical Characteristics
HT7121-2, +2.1V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
VOUT
Output Voltage
4.1V IOUT=10mA
IOUT
Output Current
4.1V
∆VOUT
Load Regulation
4.1V 1mA≤IOUT≤20mA
VDIF
Voltage Drop
ISS
Current Consumption
VIN
(Note)
—
—
IOUT=1mA, ∆VOUT=2%
4.1V No load
Line Regulation
—
Input Voltage
—
3.1V≤VIN≤30V, IOUT=1mA
—
Temperature Coefficient 4.1V IOUT=10mA, -40°C<Ta<85°C
Min.
Typ.
Max.
Unit
2.079
2.100
2.121
V
20
30
—
mA
—
15
45
mV
—
35
100
mV
—
2.5
4.0
µA
—
0.1
0.2
%/V
—
—
30
V
—
±100
—
ppm/°C
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
HT7123-2, +2.3V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
VOUT
Output Voltage
4.3V IOUT=10mA
IOUT
Output Current
4.3V
∆VOUT
Load Regulation
4.3V 1mA≤IOUT≤20mA
VDIF
Voltage Drop (Note)
ISS
Current Consumption
VIN
—
IOUT=1mA, ∆VOUT=2%
4.3V No load
Line Regulation
—
Input Voltage
—
Temperature Coefficient
—
3.3V≤VIN≤30V, IOUT=1mA
—
4.3V IOUT=10mA, -40°C<Ta<85°C
Min.
Typ.
Max.
Unit
2.277
2.300
2.323
V
20
30
—
mA
—
15
45
mV
—
35
100
mV
—
2.5
4.0
µA
—
0.1
0.2
%/V
—
—
30
V
—
±100
—
ppm/°C
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
Rev. 1.00
3
April 10, 2013
HT71xx-2
HT7125-2, +2.5V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
VOUT
Output Voltage
4.5V IOUT=10mA
IOUT
Output Current
4.5V
∆VOUT
Load Regulation
4.5V 1mA≤IOUT≤20mA
VDIF
Voltage Drop (Note)
ISS
Current Consumption
VIN
—
IOUT=1mA, ∆VOUT=2%
4.5V No load
Line Regulation
—
Input Voltage
—
Temperature Coefficient
—
3.5V≤VIN≤30V, IOUT=1mA
—
4.5V IOUT=10mA, -40°C<Ta<85°C
Min.
Typ.
Max.
Unit
2.475
2.500
2.525
V
20
30
—
mA
—
15
45
mV
—
35
100
mV
—
2.5
4.0
µA
—
0.1
0.2
%/V
—
—
30
V
—
±100
—
ppm/°C
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
HT7127-2, +2.7V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
VOUT
Output Voltage
4.7V IOUT=10mA
IOUT
Output Current
4.7V
∆VOUT
Load Regulation
4.7V 1mA≤IOUT≤20mA
VDIF
Voltage Drop (Note)
ISS
Current Consumption
VIN
—
IOUT=1mA, ∆VOUT=2%
4.7V No load
Line Regulation
—
Input Voltage
—
Temperature Coefficient
—
3.7V≤VIN≤30V, IOUT=1mA
—
4.7V IOUT=10mA, -40°C<Ta<85°C
Min.
Typ.
Max.
Unit
2.673
2.700
2.727
V
20
30
—
mA
—
15
45
mV
—
35
100
mV
—
2.5
4.0
µA
—
0.1
0.2
%/V
—
—
30
V
—
±100
—
ppm/°C
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
Rev. 1.00
4
April 10, 2013
HT71xx-2
HT7130-2, +3.0V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
Typ.
Max.
Unit
2.97
3.00
3.03
V
20
30
—
mA
VOUT
Output Voltage
5V
IOUT
Output Current
5V
∆VOUT
Load Regulation
5V
1mA≤IOUT≤20mA
—
15
45
mV
VDIF
Voltage Drop (Note)
—
IOUT=1mA, ∆VOUT=2%
—
35
100
mV
Current Consumption
5V
No load
—
2.5
4.0
µA
Line Regulation
—
4V≤VIN≤30V, IOUT=1mA
—
0.1
0.2
%/V
Input Voltage
—
—
—
—
30
V
Temperature Coefficient
5V
IOUT=10mA, -40°C<Ta<85°C
—
±100
—
ppm/°C
ISS
VIN
IOUT=10mA
Min.
—
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
HT7133-2, +3.3V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
VOUT
Output Voltage
5.3V IOUT=10mA
IOUT
Output Current
5.3V
∆VOUT
Load Regulation
5.3V 1mA≤IOUT≤30mA
VDIF
Voltage Drop (Note)
ISS
Current Consumption
VIN
—
IOUT=1mA, ∆VOUT=2%
5.3V No load
Line Regulation
—
Input Voltage
—
Temperature Coefficient
—
4.3V≤VIN≤30V, IOUT=1mA
—
5.3V IOUT=10mA, -40°C<Ta<85°C
Min.
Typ.
Max.
Unit
3.267
3.300
3.333
V
20
30
—
mA
—
15
45
mV
—
35
55
mV
—
2.5
4.0
µA
—
0.1
0.2
%/V
—
—
30
V
—
±100
—
ppm/°C
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
Rev. 1.00
5
April 10, 2013
HT71xx-2
HT7136-2, +3.6V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
VOUT
Output Voltage
5.6V IOUT=10mA
IOUT
Output Current
5.6V
∆VOUT
Load Regulation
5.6V 1mA≤IOUT≤30mA
VDIF
Voltage Drop (Note)
ISS
Current Consumption
VIN
—
IOUT=1mA, ∆VOUT=2%
5.6V No load
Line Regulation
—
Input Voltage
—
Temperature Coefficient
—
4.6V≤VIN≤30V, IOUT=1mA
—
5.6V IOUT=10mA, -40°C<Ta<85°C
Min.
Typ.
Max.
Unit
3.564
3.600
3.636
V
20
30
—
mA
—
15
45
mV
—
35
55
mV
—
2.5
4.0
µA
—
0.1
0.2
%/V
—
—
30
V
—
±100
—
ppm/°C
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
HT7144-2, +4.4V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
VOUT
Output Voltage
6.4V IOUT=10mA
IOUT
Output Current
6.4V
∆VOUT
Load Regulation
6.4V 1mA≤IOUT≤30mA
VDIF
Voltage Drop (Note)
ISS
Current Consumption
VIN
—
IOUT=1mA, ∆VOUT=2%
6.4V No load
Line Regulation
—
Input Voltage
—
Temperature Coefficient
—
5.4V≤VIN≤30V, IOUT=1mA
—
6.4V IOUT=10mA, -40°C<Ta<85°C
Min.
Typ.
Max.
Unit
4.356
4.400
4.444
V
20
30
—
mA
—
15
45
mV
—
35
55
mV
—
2.5
4.0
µA
—
0.1
0.2
%/V
—
—
30
V
—
±100
—
ppm/°C
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
Rev. 1.00
6
April 10, 2013
HT71xx-2
HT7150-2, +5.0V Output Type
Ta=25°C
Symbol
Parameter
Test Conditions
VIN
Conditions
Typ.
Max.
Unit
4.95
5.00
5.05
V
20
30
—
mA
VOUT
Output Voltage
7V
IOUT
Output Current
7V
∆VOUT
Load Regulation
7V
1mA≤IOUT≤30mA
—
15
45
mV
VDIF
Voltage Drop (Note)
—
IOUT=1mA, ∆VOUT=2%
—
35
55
mV
Current Consumption
7V
No load
—
2.5
4.0
µA
Line Regulation
—
6V≤VIN≤30V, IOUT=1mA
—
0.1
0.2
%/V
Input Voltage
—
—
—
—
30
V
Temperature Coefficient
7V
IOUT=10mA, -40°C<Ta<85°C
—
±100
—
ppm/°C
ISS
VIN
IOUT=10mA
Min.
—
Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the
output voltage from the value at VIN = VOUT+2V with a fixed load.
Rev. 1.00
7
April 10, 2013
HT71xx-2
Typical Performance Characteristics
Test Condition: Vin=Vout+2V, IOUT=10mA, TJ=25°C, unless otherwise noted
Output Voltage vs Input Voltage
HT7133-2
3.50
Output voltage(V)
Output voltage(V)
Iout=10mA
5.15
3.40
3.35
3.30
3.25
3.20
3.15
3.10
HT7150-2
5.20
Iout=10mA
3.45
5.10
5.05
5.00
4.95
4.90
4.85
5
10
15
20
25
4.80
30
6
10
14
Input Voltage (V)
18
22
26
30
Input Voltage (V)
Quiescent current (Iout=0mA) vs Temperature
HT7133-2
2.50
Vin=30V
2.00
1.50
1.00
0.50
0.00
-40
-30
-20
-10
0
10
20
30
HT7150-2
3.00
Vin=5.3V
Quiescent current (uA)
Quiescent current(uA)
3.00
40
50
60
70
2.50
Vin=30V
2.00
1.50
1.00
0.50
0.00
80
Vin=7V
-40
-30
-20
-10
0
Temperature (OC)
10
20
30
40
50
60
70
80
40
50
60
70
80
Temperature (OC)
Output Voltage vs Temperature (Vin=Vout+2V)
HT7133-2
3.50
Output voltage(V)
Output voltage(V)
3.35
3.30
3.25
3.20
Iout=30mA
5.10
5.05
5.00
4.95
4.90
4.85
3.15
3.10
Iout=10mA
5.15
Iout=30mA
3.40
HT7150-2
5.20
Iout=10mA
3.45
4.80
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
-40
-30
-20
-10
0
Temperature (OC)
10
20
30
Temperature(OC)
Output Voltage vs Temperature
HT7133-2
3.50
Output voltage(V)
Output voltage(V)
3.35
3.30
3.25
3.20
3.15
3.10
Vin=7V
5.15
Vin=30V
3.40
HT7150-2
5.20
Vin=5.3V
3.45
Vin=30V
5.10
5.05
5.00
4.95
4.90
4.85
-40
-30
-20
-10
0
10
20
30
40
50
60
70
4.80
80
Temperature(OC)
Rev. 1.00
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
Temperature(OC)
8
April 10, 2013
HT71xx-2
Application Circuits
Basic Circuits
High Output Current Positive Voltage Regulator
Short-Circuit Protection by Tr1
V
IN
R s
T r1
V
R 1
C 1
1 0 F
IN
O U T
C 2
1 0 F
S in g le p o in t G N D
9
V
O U T
G N D
C o m m o n
Rev. 1.00
V
C o m m o n
April 10, 2013
HT71xx-2
Circuit for Increasing Output Voltage
VOUT=VXX (1+R2/R1)+ISS×R2
Circuit for Increasing Output Voltage
VOUT=VXX+VD1
Constant Current Regulator
IOUT=VXX/RA+ISS
Dual Supply
Rev. 1.00
10
April 10, 2013
HT71xx-2
Package Information
Note that the package information provided here is for consultation purposes only. As this information may be
updated at regular intervals users are reminded to consult the Holtek website for the latest version of the package
information.
Additional supplementary information with regard to packaging is listed below. Click on the relevant section to be
transferred to the relevant website page.
• Further Package Information (include Outline Dimensions, Product Tape and Reel Specifications)
• Packing Meterials Information
• Carton information
• PB FREE Products
• Green Packages Products
Rev. 1.00
11
April 10, 2013
HT71xx-2
3-pin TO92 Outline Dimensions
Symbol
Nom.
Max.
A
0.170
—
0.200
B
0.170
—
0.200
C
0.500
—
—
D
0.011
—
0.020
E
0.090
—
0.110
F
0.045
—
0.055
G
0.045
—
0.065
H
0.130
—
0.160
α
0°
—
10°
Symbol
Rev. 1.00
Dimensions in inch
Min.
Dimensions in mm
Min.
Nom.
Max.
A
4.32
—
5.08
B
4.32
—
5.08
C
12.70
—
—
D
0.28
—
0.51
E
2.29
—
2.79
F
1.14
—
1.40
G
1.14
—
1.65
H
3.30
—
4.06
α
0°
—
10°
12
April 10, 2013
HT71xx-2
3-pin SOT89 Outline Dimensions
Symbol
Dimensions in inch
Min.
Nom.
Max.
A
0.173
—
0.181
B
0.059
—
0.072
C
0.090
—
0.102
D
0.035
—
0.047
E
0.155
—
0.167
F
0.014
—
0.019
G
0.017
—
0.022
H
—
0.059
—
I
55
—
63
J
14
—
17
Symbol
Rev. 1.00
Dimensions in mm
Min.
Nom.
Max.
A
4.39
—
4.60
B
1.50
—
1.83
C
2.29
—
2.59
D
0.89
—
1.19
E
3.94
—
4.24
F
0.36
—
0.48
G
0.43
—
0.56
H
—
1.50
—
I
1.40
—
1.60
J
0.36
—
0.43
13
April 10, 2013
HT71xx-2
5-pin SOT23-5 Outline Dimensions
Symbol
Dimensions in inch
Min.
Nom.
Max.
A
0.039
—
0.051
A1
—
—
0.004
A2
0.028
—
0.035
b
0.014
—
0.020
C
0.004
—
0.010
D
0.106
—
0.122
E
0.055
—
0.071
e
—
0.075
—
H
0.102
—
0.118
L
0.015
—
—
θ
0°
—
9°
Symbol
Rev. 1.00
Dimensions in mm
Min.
Nom.
Max.
A
1.00
—
1.30
A1
—
—
0.10
A2
0.70
—
0.90
b
0.35
—
0.50
C
0.10
—
0.25
D
2.70
—
3.10
E
1.40
—
1.80
e
—
1.90
—
H
2.60
—
3.0
L
0.37
—
—
θ
0°
—
9°
14
April 10, 2013
HT71xx-2
Copyright© 2013 by HOLTEK SEMICONDUCTOR INC.
The information appearing in this Data Sheet is believed to be accurate at the time
of publication. However, Holtek assumes no responsibility arising from the use of
the specifications described. The applications mentioned herein are used solely
for the purpose of illustration and Holtek makes no warranty or representation that
such applications will be suitable without further modification, nor recommends
the use of its products for application that may present a risk to human life due to
malfunction or otherwise. Holtek's products are not authorized for use as critical
components in life support devices or systems. Holtek reserves the right to alter
its products without prior notification. For the most up-to-date information, please
visit our web site at http://www.holtek.com.tw.
Rev. 1.00
15
April 10, 2013
Similar pages