KOA HV732ATTED1004J Flat chip resistors for high voltage Datasheet

resistors
HV73
flat chip resistors for high voltage
EU
features
• Superior to RK73 series in maximum working voltage
• Marking: 1J: No marking, black protective coating
2A ~ 3A: White three-digit marking on
black protective coating
• Products with lead-free terminations meet EU RoHS
requirements. EU RoHS regulation is not intended for
Pb-glass contained in electrode, resistor element and glass.
dimensions and construction
L
c
Type
c
W
Solder
Plating
Ni
Plating
t
d
Protective
Coating
L
(Inch Size Code)
Resistive Inner
Film
Electrode
Ceramic
Substrate
Dimensions inches (mm)
W
c
d
t
1J
(0603)
.063±.008 .031±.004 .012±.004 .012±.004 .018±.004
(1.6±0.2)
(0.8±0.1)
(0.3±0.1)
(0.3±0.1) (0.45±0.1)
2A
(0805)
.079±.008 .049±.004 .016±.008
(2.0±0.2) (1.25±0.1) (0.4±0.2)
.012
2B
(1206)
.126±.008 .063±.008
(1.6±0.2)
(3.2±0.2)
.02±.012
(0.5±0.3)
.016
2H
(2010)
.197±.008 .098±.008
(2.5±0.2)
(5.0±0.2)
.02±.012
(0.5±0.3)
.016
3A
(2512)
.248±.008 .122±.008
(3.1±0.2)
(6.3±0.2)
.02±.012
(0.5±0.3)
(0.3
(0.4
+.008
-.004
+0.2 )
-0.1
.02±.004
(0.5±0.1)
+.008
-.004
+0.2 )
-0.1
.024±.004
(0.6±0.1)
+.008
-.004
+0.2
(0.4 -0.1 )
.016 +.008
-.004
(0.4 +0.2
-0.1 )
.024±.004
(0.6±0.1)
.024±.004
(0.6±0.1)
ordering information
New Part #
HV73
2B
Type
Size
1J: 0.1W
2A: 0.125W
2B: 0.25W
2H: 0.5W
3A: 1W
T
Termination
Material
T: Sn
TD
Packaging
TD: 0603, 0805, 1206:
7" 4mm pitch punched paper
TDD: 0603, 0805, 1206:
10" paper tape
TE: 2010 & 2512:
7" embossed plastic
TED: 2010 & 2512:
10" embossed plastic
For further information on packaging,
please refer to Appendix A
1004
F
Nominal
Resistance
±0.5%, ±1%:
3 significant figures
+ 1 multiplier
±2%, ±5%:
2 significant figures
+ 1 multiplier
Resistance
Tolerance
D: ±0.5%
F: ±1%
G: ±2%
J: ±5%
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
26
12/22/10
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
flat chip resistors for high voltage
applications and ratings
E-24
(D±0.5%)
E-24
(F±1%)
E-24
(G±2%)
E-24
(J±5%)
Absolute
Maximum
Working
Voltage
±100**
—
10k - 10M
10k - 10M
10k - 10M
350V
500V*
0.125W
(0.25W)***
±100
±200
100k - 1M
—
100k - 10M 100k - 10M 100k - 10M
—
—
11M - 51M
400V
800V*
2B
0.25W
±100
±200
100k - 1M
—
100k - 10M 100k - 10M 100k - 10M
—
—
11M - 51M
500V
1000V*
2H
0.5W
±100
±200
100k - 1M
—
100k - 10M 100k - 10M 100k - 10M
—
—
11M - 51M
2000V(*D.C.)
3000V*
3A
1W
±100
±200
43k - 1M
—
43k - 10M
11M - 20M
3000V(*D.C.)
4000V*
Part
Designation
Power
Rating
@ 70°C
T.C.R.
(ppm/°C)
Max.
1J
0.1W
2A
Resistance Range (Ω)
43k - 10M
11M - 20M
43k - 10M
11M - 51M
Maximum
Overload
Voltage
(D.C.)*
Operating
Temperature
Range
-55°C
to
+155°C
* AC Voltage Reference: When using for A.C. Voltage, use the peak A.C. Voltage, which should not exceed the Maximum DC Overload Voltage
(Max. DC Voltage/ √2)
*** Contact factory prior to use
** Cold T.C.R. of 1.1MΩ ~ 10MΩ is +200x10-6/K
environmental applications
Derating Curve
100
% Rated Power
80
60
40
20
0
-60 -40 -20
-55
0
80 100 120 140 160
70
155
Ambient Temperature
(°C)
20
40
60
For resistors operated at an ambient temperature of 70°C or above, a
power rating shall be derated in accordance with the above derating curve.
Performance Characteristics
Parameter
Resistance
T.C.R.
Overload (Short time)
Resistance to Solder Heat
Rapid Change of Temperature
Moisture Resistance
Endurance at 70°C
High Temperature
Exposure
Requirement ∆ R ±(%+0.1Ω)
Limit
Typical
Within regulated
—
tolerance
Within specified
—
T.C.R.
±2%
±0.5%
±1%
±0.5%
±0.5%:
±0.3%:
(10KΩ≤R≤10MΩ) (10KΩ≤R≤10MΩ)
±1%:
±0.5%:
(11MΩ≤R≤51MΩ) (11MΩ≤R≤51MΩ)
Test Method
25°C
+25°C/-55°C and +25°C/+125°C
Rated Voltage (D.C.) x 2.5 for 5 seconds
260°C ± 5°C, 10 seconds ± 1 second
-55°C (30 minutes), +125°C (30 minutes), 100 cycles
±2%
±2%
±0.75%
±0.75%
40°C ± 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
±2%
±0.3%
+155°C, 1000 hours
Additional environmental applications can also be found at www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/05/13
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
27
resistors
HV73
Similar pages