Mean Well HVGC-100 100w single output led power supply Datasheet

HVGC-100
100W Single Output LED Power Supply
series
Features :
Constant current design
Wide input range 180~480VAC
Built-in active PFC function
High efficiency up to 91%
Protections: Short circuit / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Class 2 power unit
Three in one dimming function (0~10Vdc or 10V PWM signal or resistance)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.6)
110
F
HVGC-100-350 A
M
M
IP65 IP67
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance.
D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
RATED CURRENT
3 ~ 285V
3 ~ 142V
RATED POWER
99.75W
99.4W
RIPPLE & NOISE (max.) Note.2 1Vp-p
0.5Vp-p
Can be adjusted by internal potentiometer or through output cable
210 ~ 350mA
420 ~ 700mA
SETUP, RISE TIME
3000ms, 150ms at full load
HOLD UP TIME (Typ.)
30ms at full load
VOLTAGE RANGE
PROTECTION
700mA
MAX. OUTPUT VOLTAGE
CURRENT ADJ. RANGE
INPUT
HVGC-100-700
350mA
5.0%
CURRENT ACCURACY
OUTPUT
HVGC-100-350
440VAC / 347VAC ; B type 5000ms, 150ms at 95% load
440VAC / 347VAC
440VAC / 347VAC
Note.3 180 ~ 480VAC
254VDC ~ 679VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF 0.98/230VAC, PF 0.98/277VAC, PF 0.97/347VAC, PF 0.94/440VAC at full load (Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)
91%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.32A / 347VAC
0.26A / 440VAC
COLD START 50A / 440VAC
91%
LEAKAGE CURRENT
<0.75mA / 440VAC
SHORT CIRCUIT
Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
300 ~ 320V
150 ~ 160V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURE
100
10 (RTH2)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-40 ~ +70
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
(Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80
0.03%/
, 10 ~ 95% RH
(0 ~ 50
)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS Note.4 UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP65 or IP67 approved ; design refer to UL60950-1, TUV EN60950-1
SAFETY &
EMC
OTHERS
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3, FCC part 15 class B
EMC IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A
186.1Khrs min. MIL-HDBK-217F (25 )
DIMENSION
236*68*38.8mm (L*W*H)
1.18Kg; 12pcs/15.2Kg/0.74CUFT
PACKING
NOTE
I/P-FG:1.88KVAC
O/P-FG:0.5KVAC
1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 2.2uf parallel capacitor.
3. Derating may be needed under low input voltages. Please check the static characteristics for more details.
4. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Refer to warranty statement.
File Name:HVGC-100-SPEC 2012-03-20
HVGC-100
100W Single Output LED Power Supply
Mechanical Specification
Case No.994
series
Unit:mm
A Type:(HVGC-100-_A)
236
212
12
9.4
9.6
Io
ADJ.
300 20
34.2
T case
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
104.4
300 20
+V(Red)
-V(Black)
9.4
34
STW 18AWG 3C
SJTW 18AWG 2C
4.2 4PL
38.8
T case: Max. Case Temperature.
IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
(Can access by removing the rubber stopper on the case.)
B Type:(HVGC-100-_B)
236
212
12
9.6
9.4
300 20
34.2
68
T case
104.4
SJTW 18AWG 2C
34
STW 18AWG 3C
9.4
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
UL2517 18AWG 2C
300 20
DIM+(Blue)
DIM-(White)
+V(Red)
-V(Black)
4.2 4PL
38.8
T case: Max. Case Temperature.
D Type(option):(HVGC-100-_D)
236
212
12
9.4
9.6
T case
68
34.2
300 20
104.4
300 20
+V(Red)
-V(Black)
34
STW 18AWG 3C
9.4
SJTW 18AWG 2C
4.2 4PL
T case: Max. Case Temperature.
38.8
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
IP67 rated. Timer dimming function, contact MEAN WELL for details.
File Name:HVGC-100-SPEC 2012-03-20
HVGC-100
100W Single Output LED Power Supply
series
Block Diagram
Fosc : 80KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
DIM+
DIM(B Type)
O.L.P.
FG
O.L.P.
DETECTION
CIRCUIT
PWM & PFC
CONTROL
PFC
CONTROL
O.V.P.
O.T.P.
Derating Curve
Static Characteristics
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-40
-25
-10
0
15
30
50
60
70
60
50
40
(HORIZONTAL)
180
AMBIENT TEMPERATURE ( )
347
440
480
INPUT VOLTAGE (V) 60Hz
Power Factor Characteristic
PF
Constant Current Mode
1.00
0.98
0.96
0.94
0.92
0.90
0.88
0.86
0.84
0.82
0.80
440V
347V
277V
230V
50%
60%
70%
80%
90%
100%
(100W)
LOAD
File Name:HVGC-100-SPEC 2012-03-20
HVGC-100
100W Single Output LED Power Supply
series
EFFICIENCY vs LOAD (HVGC-100-700 Model)
HVGC-100 series possess superior working efficiency that up to 91% can be reached in field applications.
0.94
0.90
EFFICIENCY (%)
0.86
0.82
0.78
440V
0.74
347V
0.70
277V
0.66
230V
0.62
0.58
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
Vo(%)
100
(A) Constant
Voltage area
(B)
Constant
Current area
50
(max.)
50
100
Io (%)
Typical LED power supply I-V curve
File Name:HVGC-100-SPEC 2012-03-20
HVGC-100
100W Single Output LED Power Supply
series
DIMMING OPERATION
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
HVGC-100
+V(Red)
-V(Black)
Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
Please DO NOT connect "DIM-" to "-V".
Reference resistance value for output current adjustment (Typical)
10K
30K
40K
50K
70K
80K
90K
Single driver
100K
60K
20K
Resistance
Multiple
drivers
value
(N=driver quantity for synchronized 10K
/N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N
dimming operation)
Percentage of rated current
20%
10%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
----102%~108%
0 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
102%~108%
10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
102%~108%
WATERPROOF CONNECTION
Waterproof connector
Waterproof connector can be assembled on the output cable of HVGC-100 to operate in dry/wet/damp or outdoor environment.
AC
source
Size
M12
Order No.
Suitable Current
HVGC-100
I/P
O/P
Pin Configuration (Female)
4-PIN
5A/PIN
M12-04
10A max.
5-PIN
5A/PIN
M12-05
10A max.
Size
M15
Order No.
Suitable Current
Pin Configuration (Female)
2-PIN
12A/PIN
M15-02
12A max.
LED Lamp
File Name:HVGC-100-SPEC 2012-03-20
100W Single Output LED Power Supply
HVGC-100
series
Cable Joiner
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
20
25
66
26
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HVGC-100
O/P Wires
CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
Junction Box(Option )
208.8
10
76
370.8
8.5
STW 18AWG 3C
+V(Red)
-V(Black)
32
68
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
61
8.5 6
5
SJTW 18AWG 2C
2- 5
3- PF 1/2"
3- PF 1/2"
150 20
35
38.8
150 20
Optional junction box available for A / Blank - type , please contact MEAW WELL for details.
86
File Name:HVGC-100-SPEC 2012-03-20
Similar pages