VISHAY HVR2500001505FA100

HVR25, HVR37
Vishay BCcomponents
High Ohmic/High Voltage Metal Film Leaded Resistors
FEATURES
• Metal film technology
• High pulse loading (up to 10 kV) capability
• Small size (0207/0411)
• Compatible with lead (Pb)-free and lead containing
soldering processes
• Compliant to RoHS directive 2002/95/EC
APPLICATIONS
• Power supplies
• Electronic ballast
A homogenous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned electrolytic copper wires are
welded to the end-caps. The resistors are coated with a blue,
non-flammable lacquer, which provides electrical,
mechanical, and climatic protection.
• White goods
• Television
TECHNICAL SPECIFICATIONS
DESCRIPTION
HVR25
HVR37
Resistance Range
100 kΩ to
10 MΩ
100 kΩ to
10 MΩ
100 kΩ to
10 MΩ
100 kΩ to
10 MΩ
Resistance Tolerance
±5%
E24 series
±1%
E24/E96 series
±5%
E24 series
±1%
E24/E96 series
Temperature Coefficient
± 200 ppm/K
Climatic Category
(LCT/UCT/Days)
55/155/56
Rated Dissipation, P70
0.25 W
0.5 W
DC
1600 V
3500 V
RMS
1150 V
2500 V
Maximum Permissible Voltage Umax.
Basic Specification
IEC 60115-1
Stability After:
Load (1000 h, P70)
Long Term Damp Heat Test (56 Days)
Soldering (10 s, 260 °C)
www.vishay.com
148
± (5 % R + 0.1 Ω)
± (1.5 % R + 0.1 Ω)
± (5 % R + 0.1 Ω)
± (1.5 % R + 0.1 Ω)
± (1.5 % R + 0.1 Ω)
± (1.5 % R + 0.1 Ω)
± (1.5 % R + 0.1 Ω)
± (1.5 % R + 0.1 Ω)
± (1 % R + 0.1 Ω)
± (1 % R + 0.1 Ω)
± (1 % R + 0.1 Ω)
± (1 % R + 0.1 Ω)
For technical questions, contact: [email protected]
Document Number: 30260
Revision: 02-Dec-09
HVR25, HVR37
High Ohmic/High Voltage
Metal Film Leaded Resistors
PART NUMBER AND PRODUCT DESCRIPTION
Vishay BCcomponents
(1)
PART NUMBER: HVR2500001503JA100
H
V
R
2
5
0
0
0
0
1
5
0
3
J
A
1
0
0
MODEL/SIZE
VARIANT
TCR/MATERIAL
VALUE
TOLERANCE
PACKAGING (2)
SPECIAL
HVR2500
HVR3700
0 = Neutral
0 = Standard
3 digit value
1 digit multiplier
MULTIPLIER
3 = *103
4 = *104
5 = *105
F=±1%
J=±5%
A1
A5
R5
N4
Up to 2 digits
00 = Standard
PRODUCT DESCRIPTION: HVR25 5 % A1 150K
HVR25
5%
A1
150K
MODEL
TOLERANCE
PACKAGING (2)
RESISTANCE VALUE
HVR25
HVR37
±1%
±5%
A1
A5
R5
N4
150K = 150 kΩ
4M64 = 4.64 MΩ
Notes
(1) The PART NUMBER is shown to facilitate the introduction of the unified part numbering system
(2) Please refer to table PACKAGING, see next page
PACKAGING
AMMO PACK
MODEL
PIECES
CODE
PIECES
CODE
5000
A5
5000
R5
1000
A1
Radial
4000
N4
Axial, 52 mm
1000
A1
5000
R5
Axial, 52 mm
HVR25
HVR37
REEL
TAPING
DIMENSIONS
L1
ØD
Ød
L2
A
DIMENSIONS - Resistor types, mass and relevant physical dimensions
L1 max.
(mm)
L2 max.
(mm)
Dmax.
(mm)
Ød
(mm)
A
(mm)
MASS
(mg)
HVR25
6.5
7.5
2.5
0.58 ± 0.05
52.5 ± 1.5
220
HVR37
10
12
4
0.78 ± 0.05
52.5 ± 1.5
500
TYPE
Document Number: 30260
Revision: 02-Dec-09
For technical questions, contact: [email protected]
www.vishay.com
149
HVR25, HVR37
High Ohmic/High Voltage
Metal Film Leaded Resistors
Vishay BCcomponents
PRODUCTS WITH RADIAL LEADS (HVR25)
P2
P
H1
H
H0
L
L1
W0
W
F
P0
P1
D0
DIMENSIONS - Radial Taping
SYMBOL
PARAMETER
VALUE
TOLERANCE
UNIT
P
Pitch of components
12.7
± 1.0
mm
P0
Feed-hole pitch
12.7
± 0.2
mm
P1
Feed-hole centre to lead at topside at the tape
3.85
± 0.5
mm
P2
Feed-hole center to body center
6.35
± 1.0
mm
F
Lead-to-lead distance
4.8
+ 0.7/- 0
mm
W
Tape width
18.0
± 0.5
mm
W0
Minimum hold down tape width
5.5
-
mm
H1
Component height
29
Max.
mm
H0
Lead wire clinch height
16.5
± 0.5
mm
H
Height of component from tape center
19.5
±1
mm
D0
Feed-hole diameter
4.0
± 0.2
mm
L
Maximum length of snipped lead
11.0
-
mm
L1
Minimum lead wire (tape portion) shortest lead
2.5
-
mm
Note
• Please refer document number 28721 “Packaging” for more detail
MARKING
The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062,
marking codes for resistors and capacitors. Standard values of nominal resistance are taken from the E24 and E24/E96 series
for resistors with a tolerance of ± 5 % or ± 1 % respectively. The values of the E24/E96 series are in accordance with IEC 60063.
Yellow and grey are used instead of gold and silver because metal particles in the lacquer could affect high-voltage properties.
www.vishay.com
150
For technical questions, contact: [email protected]
Document Number: 30260
Revision: 02-Dec-09
HVR25, HVR37
High Ohmic/High Voltage
Metal Film Leaded Resistors
Vishay BCcomponents
Power Dissipation P
FUNCTIONAL PERFORMANCE
100
0
- 55
0
70
155
Ambient temperature ϑ amb
Derating - Standard Operation
Maximum dissipation (Pmax.) in percentage of rated power as a function of ambient temperature (Tamb)
PULSE LOADING CAPABILITY
Note
• Maximum allowed peak pulse voltage in accordance with IEC 60065, 14.1.a; 50 discharges from a 1 nF capacitor charged to Umax.;
12 discharges/min
12
11
10
Ûmax. (kV)
9
8
7
HVR25
ΔR = ± (4.0 % R + 0.1 Ω)
6
5
4
10-2
10-1
100
101
102
R (MΩ)
12
11
10
Ûmax. (kV)
9
8
HVR37
For 5 % tolerance ΔR = ± (4.0 % R + 0.1 Ω)
For 1 % tolerance ΔR = ± (2.0 % R + 0.1 Ω)
7
6
5
4
10-2
10-1
100
101
102
R (MΩ)
Document Number: 30260
Revision: 02-Dec-09
For technical questions, contact: [email protected]
www.vishay.com
151
HVR25, HVR37
Vishay BCcomponents
High Ohmic/High Voltage
Metal Film Leaded Resistors
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with IEC 60115-1, category 55/155/56 (rated temperature range
- 55 °C to + 155 °C; damp heat, long term, 56 days) and along the lines of IEC 60068-2-xx test method. The tests are carried out
under standard atmospheric conditions according to IEC 60068-1, 5.3 unless otherwise specified. In some instances deviations
from IEC recommendations were necessary for our method of specifying.
PERFORMANCE
IEC
60115-1
CLAUSE
IEC
60068-2-xx
TEST
METHOD
TEST
-
Temperature
coefficient
Between
- 55 °C and + 155 °C
Endurance at 70 °C
1000 h;
loaded with P70 or Umax.;
1.5 h ON; 0.5 h OFF
4.8
4.25.1
4.24
-
78 (Cab)
4.23
4.23.2
PROCEDURE
HVR25
Damp heat,
steady state
± (5 % R + 0.1 Ω)
± (1.5 % R + 0.1 Ω)
56 days; 40 °C;
90 % to 95 % RH
loaded with 0.01 P70
for 5 % tolerance
± (5 % R + 0.1 Ω)
for 1 % tolerance
± (1.5 % R + 0.1 Ω)
Climatic sequence
Dry heat
16 h, 155 °C
4.23.3
30 (Db)
24 h; 25 °C to 55 °C
90 % to 100 % RH; 1 cycle
4.23.4
1 (Aa)
Cold
2 h, - 55 °C
4.23.6
30 (Db)
Damp heat,
(accelerated)
remaining cycles
5 days; 25 °C to 55 °C
90 to 100 % RH
Rapid change of
temperature
30 min at LCT;
30 min at UCT;
LCT = - 55 °C;
UCT = 155 °C;
5 cycles
4.12
14 (Na)
-
-
Short time overload
Noise
No visual damage
± (1 % R + 0.1 Ω)
Room temperature;
dissipation 6.25 x P70
(voltage not more than 2 x limiting
voltage,
10 000 Vmax.);
10 cycles 5 s ON and 45 s OFF
for 5 % tolerance
± (2 % R + 0.1 Ω)
for 1 % tolerance
± (1 % R + 0.1 Ω)
IEC 60195
21 (Ua1)
Tensile all samples
Load 10 N; 10 s
4.16.3
21 (Ub)
Bending half number
of samples
Load 5 N; 4 x 90°
4.16.4
21 (Uc)
Torsion other half of
samples
3 x 360° in opposite direction
www.vishay.com
152
± (1.5 % R + 0.1 Ω)
Max. 5 µV/V
Max. 2.5 µV/V
Robustness of
terminations:
4.16
4.16.2
± 200 ppm/K
for 5 % tolerance
Damp heat,
cyclic
4.13
HVR37
for 1 % tolerance
2 (Ba)
4.19
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
For technical questions, contact: [email protected]
No damage
± (1 % R + 0.1 Ω)
Document Number: 30260
Revision: 02-Dec-09
HVR25, HVR37
High Ohmic/High Voltage
Metal Film Leaded Resistors
Vishay BCcomponents
PERFORMANCE
IEC
60115-1
CLAUSE
IEC
60068-2-xx
TEST
METHOD
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
TEST
PROCEDURE
6 (Fc)
Vibration
Frequency 10 Hz to 500 Hz;
displacement
1.5 mm or acceleration 10 g;
3 directions;
total 6 h (3 x 2 h)
± (1.0 % R + 0.1 Ω)
4.17
20 (Ta)
Solderability
(after ageing)
2 s; 235 °C: Solder bath method;
SnPb40
3 s; 245 °C: Solder bath method;
SnAg3Cu0.5
Good tinning
(≥ 95 % covered);
no visible damage
4.18
20 (Tb)
Resistance to
soldering heat
Thermal shock: 10 s; 260 °C;
3 mm from body
± (1 % R + 0.1 Ω)
4.29
45 (XA)
Component solvent
resistance
Isopropyl alcohol
No visible damage
4.6.11
-
Insulation resistance
U = 500 VDC
during 1 min,
V-block method
Rins min. 104 MΩ
4.7
-
Voltage proof on
insulation
URMS = 700 V
during 1 min,
V-block method
No flashover or breakdown
4.22
HVR25
HVR37
12NC INFORMATION FOR HISTORICAL CODING REFERENCE ONLY
• The resistors have a 12 digit ordering code starting with
2306
• The next 4 or 5 digits indicate the resistor type and
packaging
• For 5 % tolerance the last 3 digits indicate the resistance
value:
- The first 2 digits indicate the resistance value
- The last digit indicates the resistance decade in
accordance with table
• For 1 % tolerance the last 4 digits indicate the resistance
value:
- The first 3 digits indicate the resistance value
- The last digit indicates the resistance decade in
accordance with table
Last Digit of 12NC Indicating Resistance Decade
RESISTANCE
DECADE (5 %)
RESISTANCE
DECADE (1 %)
LAST DIGIT
100 kΩ to 910 kΩ
100 kΩ to 976 kΩ
4
1 MΩ to 9.1 MΩ
1 MΩ to 9.76 MΩ
5
= 10 MΩ
= 10 MΩ
6
12NC Example
HVR25, 150 kΩ, ± 5 %, ammopack 1000 pieces is
2306 241 13154
12NC - Resistor type and packaging
2306 ... .....
DESCRIPTION
TYPE
BANDOLIER
ON REEL
BANDOLIER IN AMMOPACK
TAPE WIDTH
HVR25
HVR37
Document Number: 30260
Revision: 02-Dec-09
52.5
52.5
TOLERANCE
RADIAL TAPED
4000 UNITS
1000 UNITS
5000 UNITS
5000 UNITS
241 13...
241 53...
241 23....
±5%
241 36...
±1%
241 0....
241 8....
241 7....
241 6....
±5%
-
242 13...
-
242 23...
±1%
-
242 8....
-
242 6....
For technical questions, contact: [email protected]
www.vishay.com
153
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000