Renesas HZU12A2L Silicon planar zener diode for low noise application Datasheet

HZU-L Series
Silicon Planar Zener Diode for Low Noise Application
REJ03G0043-0400
Rev.4.00
Oct.29.2007
Features
•
•
•
•
Diode noise level of this series is approximately 1/3-1/10 lower than the HZ series.
Low leakage and low zener impedance.
Wide spectrum from 5.2 V through 14.3 V of zener voltage provide flexible application.
Ultra small Resin Package (URP) is suitable for surface mount design.
Ordering Information
Part No.
HZU-L Series
Laser Mark
Let to Mark Code
Package Name
URP
Pin Arrangement
Cathode mark
Mark
1
061
2
1. Cathode
2. Anode
REJ03G0043-0400 Rev.4.00 Oct 29, 2007
Page 1 of 5
Package Code
PTSP0002ZA-A
HZU-L Series
Absolute Maximum Ratings
(Ta = 25°C)
Item
Power dissipation
Symbol
Pd
Junction temperature
Storage temperature
Tj
Tstg
Value
150
Unit
mW
150
−55 to +150
°C
°C
Electrical Characteristics
(Ta = 25°C)
Zener Voltage
Test
Condition
1
VZ (V) *
Type
Note:
HZU6A1L
Min
5.2
Max
5.5
HZU6A2L
HZU6A3L
5.3
5.4
5.6
5.7
HZU6B1L
HZU6B2L
5.5
5.6
5.8
5.9
HZU6B3L
HZU6C1L
5.7
5.8
6.0
6.1
HZU6C2L
HZU6C3L
6.0
6.1
6.3
6.4
HZU7A1L
HZU7A2L
6.3
6.4
6.6
6.7
HZU7A3L
HZU7B1L
6.6
6.7
6.9
7.0
HZU7B2L
HZU7B3L
6.9
7.0
7.2
7.3
HZU7C1L
HZU7C2L
7.2
7.3
7.6
7.7
HZU7C3L
HZU9A1L
7.5
7.7
7.9
8.1
HZU9A2L
HZU9A3L
7.9
8.1
8.3
8.5
HZU9B1L
HZU9B2L
8.3
8.5
8.7
8.9
HZU9B3L
HZU9C1L
8.7
8.9
9.1
9.3
HZU9C2L
HZU9C3L
9.1
9.3
9.5
9.7
HZU11A1L
HZU11A2L
9.5
9.7
9.9
10.1
HZU11A3L
HZU11B1L
9.9
10.2
10.3
10.6
HZU11B2L
HZU11B3L
10.4
10.7
10.8
11.1
HZU11C1L
HZU11C2L
10.9
11.1
11.3
11.6
HZU11C3L
11.4
11.9
1. Tested with DC.
REJ03G0043-0400 Rev.4.00 Oct 29, 2007
Page 2 of 5
Reverse Current
Test
IR (µA)
Condition
Dynamic Resistance
Test
rd (Ω)
Condition
IZ (mA)
0.5
Max
1
VR (V)
2.0
Max
150
IZ (mA)
0.5
0.5
1
2.0
80
0.5
0.5
1
2.0
60
0.5
0.5
1
3.5
60
0.5
0.5
1
6.0
60
0.5
0.5
1
8.0
80
0.5
HZU-L Series
(Ta = 25°C)
Zener Voltage
Test
Condition
1
VZ (V) *
Type
Note:
Reverse Current
Test
IR (µA)
Condition
HZU12A1L
Min
11.6
12.1
12.4
HZU12A2L
HZU12A3L
11.9
12.2
12.7
12.9
HZU12B1L
HZU12B2L
12.4
12.6
13.1
13.4
HZU12B3L
HZU12C1L
12.9
13.2
13.7
14.0
HZU12C2L
HZU12C3L
13.5
13.8
14.3
12.1
IZ (mA)
0.5
Max
1
Dynamic Resistance
Test
rd (Ω)
Condition
VR (V)
10.5
Max
80
IZ (mA)
0.5
1. Tested with DC.
Mark Code
Part No.
Mark No.
Part No.
Mark No.
Part No.
Mark No.
HZU6A1L
HZU6A2L
061
062
HZU9 A1L
HZU9 A2L
091
092
HZU12A1L
HZU12A2L
121
122
HZU6A3L
HZU6B1L
063
064
HZU9 A3L
HZU9 B1L
093
094
HZU12A3L
HZU12B1L
123
124
HZU6B2L
HZU6B3L
065
066
HZU9 B2L
HZU9 B3L
095
096
HZU12B2L
HZU12B3L
125
126
HZU6C1L
HZU6C2L
067
068
HZU9 C1L
HZU9 C2L
097
098
HZU12C1L
HZU12C2L
127
128
HZU6C3L
HZU7A1L
069
071
HZU9 C3L
HZU11A1L
099
111
HZU12C3L
129
HZU7A2L
HZU7A3L
072
073
HZU11A2L
HZU11A3L
112
113
HZU7B1L
HZU7B2L
074
075
HZU11B1L
HZU11B2L
114
115
HZU7B3L
HZU7C1L
076
077
HZU11B3L
HZU11C1L
116
117
HZU7C2L
HZU7C3L
078
079
HZU11C2L
HZU11C3L
118
119
REJ03G0043-0400 Rev.4.00 Oct 29, 2007
Page 3 of 5
HZU-L Series
HZU12C2L
HZU12B2L
HZU12A2L
HZU11C2L
HZU11B2L
HZU11A2L
HZU9C2L
HZU9B2L
HZU9A2L
HZU7C2L
HZU7B2L
HZU6B2L
HZU6C2L
HZU7A2L
HZU6A2L
Main Characteristic
10–2
Zener Current IZ (A)
10–3
10–4
10–5
10–6
10–7
10–8
5
6
7
8
9
10
11
12
13
14
15
Zener Voltage VZ (V)
Fig.1 Zener current vs. Zener voltage
0.10
50
0.04
20
mV/°C
10
0
0
−0.02
−10
−0.04
−20
−0.06
−30
−0.08
−40
−0.10
0
5
0.8mm
10
−50
15
200
0.8mm
30
Power Dissipation Pd (mW)
0.06
0.02
1.5mm
40
%/ °C
Zener Voltage
Temperature Coefficient γZ (mV/°C)
Zener Voltage
Temperature Coefficient γZ (%/°C)
0.08
250
Cu Foil
150
Printed circuit board
15 × 20 ×1.6t mm
Material: Glass Epoxy Resin
+Cu Foil
100
50
0
0
50
100
150
200
Zener Voltage VZ (V)
Ambient Temperature Ta (°C)
Fig.2 Temperature Coefficient vs. Zener voltage
Fig.3 Power Dissipation vs. Ambient Temperature
REJ03G0043-0400 Rev.4.00 Oct 29, 2007
Page 4 of 5
HZU-L Series
Package Dimensions
Package Name
URP
JEITA Package Code
SC-76A
RENESAS Code
PTSP0002ZA-A
Previous Code
URP / URPV
MASS[Typ.]
0.004g
D
b
E HE
l1
e1
A2
A1
l1
b2
Pattern of terminal position areas
REJ03G0043-0400 Rev.4.00 Oct 29, 2007
Page 5 of 5
Reference
Symbol
A1
A2
b
D
E
HE
b2
e1
l1
Dimension in Millimeters
Min
0
0.75
0.15
1.10
1.55
2.35
-
Nom
0.90
0.30
1.25
1.70
2.50
0.80
2.30
0.80
Max
0.1
1.05
0.45
1.40
1.85
2.65
-
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0
Similar pages