Microdc IA0503XS-1W Fixed input,isolated & regulated dual output dc/dc converter Datasheet

IA-XS-1W Series
FIXED INPUT,ISOLATED & REGULATED Dual Output DC/DC Converters
SELECTION GUIDE
Input
FEATURES
◆RoHS compliant
◆Efficiency up to 86%
◆SIP Package
◆Wide temperature performance at full
1 Watt load,-40°C to 85°C
◆UL 94V-0 package material
◆No heatsink required
◆Small footprint
Output
Switching
Frequency
(KHz,Typ)
Nominal
Range
IA0503XS-1W
5
4.75-5.25
±3.3
±100
±10
69
83
IA0505XS-1W
5
4.75-5.25
±5
±100
±10
54
83
IA0509XS-1W
5
4.75-5.25
±9
±56
±6
63
83
IA0512XS-1W
5
4.75-5.25
±12
±42
±5
63
83
IA0515XS-1W
5
4.75-5.25
±15
±33
±4
65
250
IA1203XS-1W
12
11.4-12.6
±3.3
±100
±10
72
100
IA1205XS-1W
12
11.4-12.6
±5
±100
±10
56
83
IA1209XS-1W
12
11.4-12.6
±9
±56
±6
62
83
IA1212XS-1W
12
11.4-12.6
±12
±42
±5
65
83
IA1215XS-1W
12
11.4-12.6
±15
±33
±4
86
83
IA2403XS-1W
24
22.8-25.2
±3.3
±100
±10
72
83
IA2405XS-1W
24
22.8-25.2
±5
±100
±10
54
83
IA2409XS-1W
24
22.8-25.2
±9
±56
±6
62
83
IA2412XS-1W
24
22.8-25.2
±12
±42
±5
64
83
IA2415XS-1W
24
22.8-25.2
±15
±33
±4
66
300
Voltage(VDC)
Current
Efficiency
(%,Typ)
Voltage
(VDC)
Order code
Max
Min
◆Industry standard pinout
◆Power sharing on output
◆1KVDC isolation
◆5V,12V and 24V input
◆3.3V,5V,9V,12V and 15V output
◆Internal SMD construction
ISOLATION SPECIFICATIONS
Parameter
Test conditions
Min.
◆Fully encapsulated with toroidal Magnetics
Isolation test voltage
Flash tested for 1 minute and 1mA max
1000
Typ.
Max
Units
VDC
◆No external components required
Isolation resistance
Test at Viso=500VDC
1000
MΩ
◆MTTF up to 1.5 million hours
MODEL SELECTION
IA①05②05③X④ S⑤-1W⑥
①Product Series
③Output Voltage
⑤SIP Package
②Input Voltage
④Fixed Input
⑥Rated Power
OUTPUT SPECIFICATIONS
APPLICATIONS
Parameter
Test conditions
Min
Typ.
Max.
Units
1
W
The IA_XS-1W series are specially designed for applications
where a group of polar power supplies are isolated from the
input power supply in a distributed power supply system on a
Output power
0.
Line regulation
For Vin change of ±5%
±0.25
%
Load regulation
10% to 100% full load
±1
%
Output voltage accuracy
100% full load
±3
%
Temperature drift
100% full load
0.03
%/°C
(isolation voltage ≤1000VDC);
Output Ripple*
20MHz Bandwidth
10
20
MV p-p
3) where the regulation of the output voltage and the output
Output Noise*
20MHz Bandwidth
50
100
MV p-p
circuit board.
These products apply to:
1) where the voltage of the input power supply is fixed
(voltage variation ≤±5%);
2) where isolation is necessary between input and output
ripple noise are demanded.
* Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power
Converter section, application notes.
MICRODC reserves the copyright
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
IA-XS-1W Series
Recommended circuit
TEMPERATURE CHARACTERISTICS
Parameter
Conditions
Min.
Typ.
Storage humidity range
Operating temperature
Storage temperature
Lead temperature
Max.
Units
95
%
-40
85
°C
-55
125
°C
300
°C
30
°C
1.5mm from case for 10 seconds
Temp.rise at full load
20
Cooling
If you want to further decrease the input/output ripple,
an "LC" filtering network may be connected to the
input and output ends of the DC/DC converter, see
(Figure 1).
Free air convection
Case material
Plastic(UL94-V0)
IA(XX)05XS-1W
Continuous
Short circuit protection
Others*
1
MTBF
S
3500
K hours
Weight
5.2
g
*Supply voltage must be discontinued at the end of short circuit duration.
TYPICAL CHARACTERISTICS
Temperature Derating Graph
It should also be noted that the inductance and the
frequency of the"LC"filtering network should be
staggered with the DC/DC frequency to avoid mutual
interference. However, the capacitance of the output
filter capacitor must be proper. If the capacitance is too
big, a startup problem might arise. For every channel of
output, provided the safe and reliable operation is
ensured, the greatest capacitance of its filter capacitor
sees (Table 1).
EXTERNAL CAPACITOR TABLE (TABLE 1)
Cin
Vout
Vin
(VDC)
5
(μF)
4.7
Cout
(VDC)
±5
(μF)
4.7
2.2
12
2.2
±9
24
0.47
±12
1
-
-
±15
0.47
It's not recommend to connect any external capacitor in
the application field with less than 0.5 watt output.
Overload Protection
Under normal operating conditions, the output circuit of
These products has no protection against over-current
and short-circuits. The simplest method is to connect a
self-recovery fuse in series at the input end or add a
circuit breaker to the circuit.
OUTLINE DIMENSIONS & PIN CONNECTIONS
SIZE Graph
RECOMMENDED FOOTPRINT
Top view,grid:2.54mm(0.1inch)
diameter:1.00mm(0.039inch)
Input Over-voltage Protection Circuit
The simplest device for input over-voltage protection is
a linear voltage regulator with overheat protection that is
connected to the input end in series (Figure 2).
FOOTPRINT DETAILS
Pin
Note:
Unit:mm(inch)
Pin section:0.50*0.3mm(0.020*0.012inch)
Pin section tolerances: 0.10mm( 0.004inch)
General tolerances: 0.25mm( 0.010inch)
Function
1
VIN
2
GND
7
+V0
9
-V0
10
0V
When the environment temperature is higher than 71°C,
the product output power should be less then 60% of the
rated power.
No parallel connection or plug and play.
Use dual output simultaneously, forbid opening output
pin (0V) to use as single output.
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise
specified.Another 24V products, please inquire Our technical department!
Requirement on output load
To ensure this module can operate efficiently and reliably, During operation, the minimum output load is
not less than 10% of the full load, and that this product should never be operated under no load! If the
actual output power is very small, please connect a resistor with proper resistance at the output end in
parallel to increase the load.
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646
REACH COMPLIANT INFORMATION
E-mail:[email protected]
Website:http://www.microdc.cn
http://www.microdc.cn
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2
Similar pages