ICHAUS IC-LSCOBGALS2C

iC-LSC
12-CHANNEL ACTIVE PHOTOSENSOR ARRAY
Rev C1, Page 1/7
FEATURES
APPLICATIONS
♦ Monolithic array of independent photosensors with excellent
matching
♦ Compact photosensor size of 800 µm x 300 µm enabling
high-quality encoder scanning at reduced system dimensions
♦ Narrow track pitch of 0.42 mm cuts down illumination efforts
♦ Enhanced EMI immunity due to on-chip pre-amplification
♦ Dark current compensation permits high temperature
operation
♦ Open-collector outputs as highside current source
♦ Simple gain setting and current-to-voltage conversion by
external load resistors
♦ Single supply operation from 4 V to 5.5 V
♦ Low power consumption
♦ Space saving, RoHS compliant optoQFN and optoBGA
packages
♦ Options: extended temperature range of -40 to 125 °C,
customized COB modules, reticles and code discs
♦ Optical position encoding from
analog sine/cosine signals
♦ Incremental encoders with index
signal
♦ Motor commutation encoders
PACKAGES
14-pin optoBGA
6.2 mm x 5.2 mm
32-pin optoQFN
5 mm x 5 mm / 1.4 mm
BLOCK DIAGRAM
Copyright © 2006, 2010 iC-Haus
http://www.ichaus.com
iC-LSC
12-CHANNEL ACTIVE PHOTOSENSOR ARRAY
Rev C1, Page 2/7
DESCRIPTION
The iC-LSC sensor array, coming with 12 independent channels, is a general purpose optoelectronic
scanner made to suit a variety of encoding applications, such as rotary and linear encoders used for
motion control, robotics, brushless DC motor commutation, power tools etc.
The sensor array features monolithically integrated
photosensors with active areas of 800 µm x 300 µm
each in combination with fast on-chip photocurrent
amplifiers, enabling an analog output at reasonable
signal strength to the circuit board.
The highside current source output construction
avoids a ground referenced signal and permits the
subsequent electronics to adjust the gain. In its simplest form this is done by load resistors, for instance.
The spectral sensitivity range includes visible to near
infrared light, with the maximum sensitivity being
close to a wavelength of 700 nm.
Output currents of up to 50 µA are supplied under low
light conditions, for instance when illuminated at only
3 µW/mm2 by an 850 nm LED. The photocurrent gain
is 46 dB typically.
PACKAGES
PAD LAYOUT
Chip size 2.80 mm x 2.76 mm
PAD FUNCTIONS
No. Name Function
1
2
3
4
5
6
7
8
9
10
11
12
13
14
VCC
A1
B1
C1
D1
E1
F1
F2
E2
D2
C2
B2
A2
GND
+4...5.5 V Supply Voltage
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Ground
iC-LSC
12-CHANNEL ACTIVE PHOTOSENSOR ARRAY
Rev C1, Page 3/7
PIN CONFIGURATION
oQFN32-N5x5 (5 mm x 5 mm)
PIN FUNCTIONS
No. Name Function
1
2
3
4
5
6
7
8
9...16
17
18
19
20
21
22
23
24
25...32
PIN CONFIGURATION
oBGA LS2C (6.2 mm x 5.2 mm)
VCC
n.c.
A1
B1
C1
D1
E1
F1
n.c.
F2
E2
D2
C2
B2
A2
n.c.
GND
n.c.
+4...5.5 V Supply Voltage
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Ground
PIN FUNCTIONS
No. Name Function
1
2
3
4
5
6
7
8
9
10
11
12
13
14
VCC
A1
B1
C1
D1
E1
F1
F2
E2
D2
C2
B2
A2
GND
+4...5.5 V Supply Voltage
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Highside Current Source Output
Ground
Pin numbers marked n.c. are not in use. For dimensional specifications refer to the relevant package data
sheets, available separately.
IC top markings, such as <PRODUCT ID>, <ASSY CODE> or <LOT CODE>, indicate the orientation of the
device.
iC-LSC
12-CHANNEL ACTIVE PHOTOSENSOR ARRAY
Rev C1, Page 4/7
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item
No.
Symbol
Parameter
Conditions
Unit
Min.
Max.
G001 VCC
Voltage at VCC
-0.3
6
V
G002 I(VCC)
Current in VCC
-20
20
mA
G003 V()
Pin Voltage, all signal outputs
-0.3
VCC+0.3
V
G004 I()
Pin Current, all signal outputs
-20
20
mA
G005 Vd()
ESD Susceptibility, all pins
2
kV
G006 Tj
Junction Temperature
-40
150
°C
G007 Ts
Chip Storage Temperature
-40
150
°C
HBM, 100 pF discharged through 1.5 kΩ
THERMAL DATA
Item
No.
T01
Symbol
Parameter
Conditions
Unit
Min.
Ta
Operating Ambient Temperature Range package oBGA LS2C
package oQFN32-N5x5*
T02
Ts
Storage Temperature Range
package oBGA LS2C
package oQFN32-N5x5*
T03
Tpk
Soldering Peak Temperature
package oBGA LS2C
Typ.
Max.
-20
-40
90
110
°C
°C
-30
-40
110
110
°C
°C
245
230
°C
°C
245
230
°C
°C
(extended temperature range on request)
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
TOL (time on label) 8 h;
Please refer to customer information file No. 7
for details.
T04
Tpk
Soldering Peak Temperature
package oQFN32-N5x5*
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
MSL 5A (max. floor live 24 h at 30 °C and
60 % RH);
Please refer to customer information file No. 7
for details.
*) Package qualification pending.
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.
iC-LSC
12-CHANNEL ACTIVE PHOTOSENSOR ARRAY
Rev C1, Page 5/7
ELECTRICAL CHARACTERISTICS
Operating conditions: VCC = 4...5.5 V, Tj = -40...125 °C, unless otherwise stated
Item
No.
Symbol
Parameter
Conditions
Unit
Min.
Typ.
Max.
Total Device
001
002
VCC
Permissible Supply Voltage
I(VCC)
Supply Current in VCC, dark
E() = 0
Tj = 27 °C
4
1.5
003
I(VCC)
Supply Current in VCC
λLED = λpk, E() = 0.1 mW/cm2
Tj = 27 °C
2.2
004
Vc()hi
Clamp-Voltage hi at all pins
I() = 4 mA
005
Vc()lo
Clamp-Voltage lo at all pins
I() = -4 mA
-1.2
5.5
V
2
mA
mA
4
mA
mA
11
V
-0.3
V
0.2
mW/
cm2
Photosensors
101
E()mxr
Permissible Irradiance
λLED = λpk
102
103
Aph()
Radiant Sensitive Area
0.8 mm x 0.3 mm per sensor
λar
Spectral Application Range
Se(λar) = 0.25 x S(λ)max
see Figure 1
104
λpk
Peak Sensitivity Wavelength
see Figure 1
680
nm
105
S(λ)
Spectral Sensitivity
λLED = λpk
0.45
A/W
mm2
0.24
400
950
nm
Photocurrent Amplifiers
201
Iph()
Permissible Photocurrent
Operating Range
202
η()r
203
per sensor
0
200
nA
Photo Sensitivity
λLED = 740 nm
(light-to-voltage conversion ratio)
60
120
A/W
CR()
Photocurrent Gain
150
200
204
fc()hi
Cut-off Frequency (-3 dB)
150
200
205
∆Iout()m
Channel Matching
deviation from mean value
206
∆Iout()m
Channel Cross Talk
only one photosensor illuminated at the same
time
CR() = Iout() / Iph()
-15
250
kHz
+15
0
%
%
Current Source Outputs
301
Vout()
Permissible Output Voltage
(Operating Range)
302
Iout()
Permissible Output Current
Vout() = 1 V ... VCC - 1.5 V
VCC = 4.5...5.5 V, Vout() = 1 V ... VCC - 2 V
303
tr(), tf()
Output Current Rise/Fall Time
Iph: 0 → 100 nA, 1T settling (63%);
Vout() = constant
CL = 30 pF, RL() = 10 kΩ
304
Iout()0
1
Output Dark Current
Figure 1: Relative spectral response
VCC 1.5
-50
-200
µA
µA
0.7
0.8
-0.6
V
µs
µs
+0.6
Figure 2: Typical directional characteristics
µA
iC-LSC
12-CHANNEL ACTIVE PHOTOSENSOR ARRAY
Rev C1, Page 6/7
APPLICATION CIRCUITS
Figure 3: Optical encoder application example. Here, the sine-to-digital converter iC-NV is employed to
output spike-free encoder quadrature signals featuring a minimum transition distance.
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.de/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification on this site and does not assume liability for any errors or omissions
in the materials. The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of
merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which
information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or
areas of applications of the product.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
As a general rule our developments, IPs, principle circuitry and range of Integrated Circuits are suitable and specifically designed for appropriate use in technical
applications, such as in devices, systems and any kind of technical equipment, in so far as they do not infringe existing patent rights. In principle the range of
use is limitless in a technical sense and refers to the products listed in the inventory of goods compiled for the 2008 and following export trade statistics issued
annually by the Bureau of Statistics in Wiesbaden, for example, or to any product in the product catalogue published for the 2007 and following exhibitions in
Hanover (Hannover-Messe).
We understand suitable application of our published designs to be state-of-the-art technology which can no longer be classed as inventive under the stipulations
of patent law. Our explicit application notes are to be treated only as mere examples of the many possible and extremely advantageous uses our products can
be put to.
iC-LSC
12-CHANNEL ACTIVE PHOTOSENSOR ARRAY
Rev C1, Page 7/7
ORDERING INFORMATION
Type
Package
Options
Order Designation
iC-LSC
-
iC-LSC chip
32-pin optoQFN
glass lid
5 mm x 5 mm, thickness 1.4 mm
iC-LSC oQFN32-N5x5
14-pin optoBGA
6.2 mm x 5.2 mm
glass lid
iC-LSC oBGA LS2C
14-pin optoBGA
6.2 mm x 5.2 mm
on-chip reticle
iC-LSC oBGA LS2C-LSCxR
For technical support, information about prices and terms of delivery please contact:
iC-Haus GmbH
Am Kuemmerling 18
D-55294 Bodenheim
GERMANY
Tel.: +49 (61 35) 92 92-0
Fax: +49 (61 35) 92 92-192
Web: http://www.ichaus.com
E-Mail: [email protected]
Appointed local distributors: http://www.ichaus.com/sales_partners