IDT ICT49FCT3805QI 3.3v cmos buffer/clock driver Datasheet

IDT49FCT3805/A
3.3V CMOS BUFFER/CLOCK DRIVER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
3.3V CMOS
BUFFER/CLOCK DRIVER
IDT49FCT3805/A
FEATURES:
DESCRIPTION:
FUNCTIONAL BLOCK DIAGRAM
PIN CONFIGURATION
•
•
•
•
•
•
•
•
•
•
•
The FCT3805 is a 3.3 volt, non-inverting clock driver built using
advanced dual metal CMOS technology. The device consists of two banks
of drivers, each with a 1:5 fanout and its own output enable control. The
device has a "heartbeat" monitor for diagnostics and PLL driving. The
MON output is identical to all other outputs and complies with the output
specifications in this document. The FCT3805 offers low capacitance inputs
with hysteresis.
The FCT3805 is designed for high speed clock distribution where signal
quality and skew are critical. The FCT3805 also allows single point-topoint transmission line driving in applications such as address distribution,
where one signal must be distributed to multiple recievers with low skew
and high signal quality.
For more information on using the FCT3805 with two different input
frequencies on bank A and B, please see AN-236.
0.5 MICRON CMOS Technology
Guaranteed low skew < 500ps (max.)
Very low duty cycle distortion < 1.0ns (max.)
Very low CMOS power levels
TTL compatible inputs and outputs
Inputs can be driven from 3.3V or 5V components
Two independent output banks with 3-state control
1:5 fanout per bank
"Heartbeat" monitor output
VCC = 3.3V ± 0.3V
Available in SSOP, SOIC, and QSOP packages
OE A
5
IN A
1
20
VCCB
OA1
2
19
OB1
OA2
3
18
OB2
OA3
4
17
OB3
GNDA
5
16
GNDB
OA4
6
15
OB4
OA5
7
14
OB5
GNDQ
8
13
MON
OEA
9
12
OEB
INA
10
11
INB
OA1 - OA5
5
IN B
VCCA
OB1 - OB5
OE B
M ON
SOIC/ SSOP/ QSOP
TOP VIEW
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
SEPTEMBER 2004
1
c
2004
Integrated Device Technology, Inc.
DSC-3102/5
IDT49FCT3805/A
3.3V CMOS BUFFER/CLOCK DRIVER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
PIN DESCRIPTION
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
Description
Max
Unit
VTERM(2)
VTERM(3)
Terminal Voltage with Respect to GND
–0.5 to +4.6
V
Terminal Voltage with Respect to GND
–0.5 to +7
V
VTERM(4)
Terminal Voltage with Respect to GND
–0.5 to VCC+0.5
V
TSTG
Storage Temperature
–65 to +150
°C
IOUT
DC Output Current
–60 to +60
mA
Pin Names
OEA, OEB
Description
3-State Output Enable Inputs (Active LOW)
INA, INB
Clock Inputs
OAn, OBn
Clock Outputs
MON
Monitor Output
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. Input terminals.
4. Outputs and I/O terminals.
FUNCTION TABLE (1)
CAPACITANCE (TA = +25 C, f = 1.0MHz)
NOTE:
1. H = HIGH
L = LOW
Z = High-Impedance
Inputs
O
Symbol
Parameter(1)
Conditions
Typ.
Max.
Unit
CIN
Input Capacitance
VIN = 0V
4.5
6
pF
COUT
Output Capacitance
VOUT = 0V
5.5
8
pF
NOTE:
1. This parameter is measured at characterization but not tested.
2
Outputs
OEA, OEB
INA, INB
OAn, OBn
MON
L
L
L
L
L
H
H
H
H
L
Z
L
H
H
Z
H
IDT49FCT3805/A
3.3V CMOS BUFFER/CLOCK DRIVER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified
Commercial: TA = 0°C to +70°C, Industrial: TA = -40°C to +85°C, VCC = 3.3V ± 0.3V
Symbol
VIH
Parameter
Test Conditions(1)
Min.
Typ.
Max.
Unit
Input HIGH Level (Input pins)
Guaranteed Logic HIGH Level
2
—
5.5
V
2
—
VCC + 0.5
–0.5
—
0.8
Input HIGH Level (I/O pins)
VIL
Input LOW Level (Input and I/O pins)
Guaranteed Logic LOW Level
IIH
Input HIGH Current (Input pins)
VCC = Max.
VI = 5.5V
—
—
±1
VI = VCC
—
—
±1
VCC = Max.
VI = GND
—
—
±1
VI = GND
—
—
±1
VCC = Max.
VO = VCC
—
—
±1
VO = GND
—
—
±1
Input HIGH Current (I/O pins)
IIL
Input LOW Current (Input pins)
Input LOW Current (I/O pins)
IOZH
High Impedence Output Current
IOZL
(3-State Output Pins)
V
µA
µA
VIK
Clamp Diode Voltage
VCC = Min., IIN = –18mA
—
–0.7
–1.2
V
IODH
Output HIGH Current
VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V(3)
–36
–60
–110
mA
IODL
Output LOW Current
VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V(3)
mA
VOH
Output HIGH Voltage
VCC = Min.
IOH = –0.1mA
VIN = VIH or VIL
IOH = –8mA
VCC = Min.
IOL = 0.1mA
—
—
0.2
VIN = VIH or VIL
IOL = 16mA
—
0.2
0.4
IOL = 24mA
—
0.3
0.5
—
—
±1
µA
–60
–135
–240
mA
—
150
—
mV
—
0.1
10
µA
VOL
Output LOW Voltage
IOFF
Input Power Off Leakage
IOS
Short Circuit Current(4)
VH
Input Hysteresis
ICCL
Quiescent Power Supply Current
ICCH
VCC = 0V, VIN = 4.5V
VCC = Max., VO =
GND(3)
—
VCC = Max.
50
90
200
VCC–0.2
—
—
2.4(5)
3
—
VIN = GND or VCC
ICCZ
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at Vcc = 3.3V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. This parameter is guaranteed but not tested.
5. VOH = Vcc - 0.6V at rated current.
3
V
V
IDT49FCT3805/A
3.3V CMOS BUFFER/CLOCK DRIVER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
POWER SUPPLY CHARACTERISTICS
Symbol
∆ICC
ICCD
Test Conditions(1)
Parameter
Quiescent Power Supply Current
VCC = Max.
TTL Inputs HIGH
VIN = VCC –0.6V(3)
Dynamic Power Supply Current(4)
VCC = Max.
VIN = VCC
Outputs Open
VIN = GND
Min.
Typ.(2)
Max.
Unit
—
10
30
µA
—
0.035
0.06
mA/MHz
—
0.9
1.6
—
0.9
1.6
—
20
33
—
20
33
OEA = OEB = GND
Per Output Toggling
50% Duty Cycle
IC
Total Power Supply Current(6)
VCC = Max.
VIN = VCC
Outputs Open
VIN = GND
fO = 25MHz
50% Duty Cycle
VIN = VCC –0.6V
OEA = OEB = VCC
VIN = GND
Mon. Output Toggling
VCC = Max.
VIN = VCC
Outputs Open
VIN = GND
(5)
fO = 50MHz
50% Duty Cycle
VIN = VCC –0.6V
OEA = OEB = GND
VIN = GND
Eleven Outputs Toggling
NOTES:
1.
2.
3.
4.
5.
For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
Typical values are at VCC = 3.3V, +25°C ambient.
Per TTL driven input (VIN = VCC -0.6V); all other inputs at VCC or GND.
This parameter is not directly testable, but is derived for use in Total Power Supply calculations.
Values for these conditions are examples of the IC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fONO)
ICC = Quiescent Current (ICCL, ICCH and ICCZ)
∆ICC = Power Supply Current for a TTL High Input (VIN = VCC -0.6V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fO = Output Frequency
NO = Number of Outputs at fO
All currents are in milliamps and all frequencies are in megahertz.
4
(5)
mA
IDT49FCT3805/A
3.3V CMOS BUFFER/CLOCK DRIVER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
SWITCHING CHARACTERISTICS OVER OPERATING RANGE - COMMERCIAL(3,4)
Symbol
Parameter
FCT3805A
Min.(2)
Max.
Unit
5.8
1.5
5
ns
Output Rise Time
Output Fall Time
—
—
2
2
—
—
2
2
ns
ns
tSK(O)
Output skew: skew between outputs of all banks of
same package (inputs tied together)
—
0.5
—
0.5
ns
tSK(P)
Pulse skew: skew between opposite transitions
of same output (|tPHL -– tPLH|)
—
1
—
1
ns
tSK(T)
Package skew: skew between outputs of different
—
1.5
—
1.2
ns
tR
tF
CL = 50pF
RL = 500Ω
FCT3805
Min.(2)
Max.
1.5
tPLH
tPHL
Propagation Delay
INA to OAn, INB to OBn
Conditions(1)
packages at same power supply voltage,
tPZL
temperature, package type and speed grade
Output Enable Time
1.5
6.5
1.5
6
ns
tPZH
tPLZ
OEA to OAn, OEB to OBn
Output Disable Time
1.5
5.5
1.5
5
ns
tPHZ
OEA to OAn, OEB to OBn
SWITCHING CHARACTERISTICS OVER OPERATING RANGE - INDUSTRIAL(3,4)
Symbol
Parameter
FCT3805A
Min.(2)
Max.
Unit
5.8
1.5
5.2
ns
Output Rise Time
Output Fall Time
—
—
2
2
—
—
2
2
ns
ns
tSK(O)
Output skew: skew between outputs of all banks of
same package (inputs tied together)
—
0.6
—
0.6
ns
tSK(P)
Pulse skew: skew between opposite transitions
of same output (|tPHL -– tPLH|)
—
1
—
1
ns
tSK(T)
Package skew: skew between outputs of different
—
1.5
—
1.2
ns
tR
tF
CL = 50pF
RL = 500Ω
FCT3805
Min.(2)
Max.
1.5
tPLH
tPHL
Propagation Delay
INA to OAn, INB to OBn
Conditions(1)
packages at same power supply voltage,
tPZL
temperature, package type and speed grade
Output Enable Time
1.5
6.5
1.5
6
ns
tPZH
tPLZ
OEA to OAn, OEB to OBn
Output Disable Time
1.5
5.5
1.5
5
ns
tPHZ
OEA to OAn, OEB to OBn
NOTES:
1. See test circuits and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. tPLH, tPHL, tSK(t) are production tested. All other parameters guaranteed but not production tested.
4. Propagation delay range indicated by Min. and Max. limit is due to VCC, operating temperature and process parameters. These propagation delay limits do not imply skew.
5
IDT49FCT3805/A
3.3V CMOS BUFFER/CLOCK DRIVER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
TEST CIRCUITS AND WAVEFORMS
SWITCH POSITION
6V
VCC
GND
500Ω
VOUT
VIN
Pulse
Generator
500Ω
RT
Switch
6V
Disable HIGH
Enable HIGH
GND
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
D.U.T.
50pF
Test
Disable LOW
Enable LOW
Test Circuits for All Outputs
3V
1.5V
INPUT
tPLH1
0V
tPLH
3V
1.5V
0V
VOH
1.5V
VOL
INPUT
tPHL1
tPHL
OUTPUT 1
VOH
2.0V
0.8V
OUTPUT
VOL
tPLH2
tPHL2
tSK(o) = |tPLH2 - tPLH1| or |tPHL2 - tPHL1|
Package Delay
Output Skew - tSK(O)
INPUT
tPHL
tPLH
VOH
1.5V
VOL
OUTPUT 2
tF
tR
tSK(o)
tSK(o)
1.5V
OUTPUT
3V
1.5V
0V
INPUT
VOH
1.5V
VOL
PACKAGE 1
OUTPUT
tPHL1
tPLH1
tSK(p) = |tPHL - tPLH|
3V
1.5V
0V
tSK(t)
tSK(t)
PACKAGE 2
OUTPUT
Pulse Skew - tSK(P)
tPLH2
tPHL2
VOH
1.5V
VOL
VOH
1.5V
VOL
tSK(t) = |tPLH2 - tPLH1| or |tPHL2 - tPHL1|
ENABLE
DISABLE
3V
CONTROL
INPUT
tPZL
OUTPUT
NORMALLY
LOW
SWITCH
CLOSED
t PLZ
SWITCH
OPEN
3.5V
3.5V
1.5V
0.3V V OL
tPHZ
t PZH
OUTPUT
NORMALLY
HIGH
Package Skew - tSK(T)
1.5V
0V
0.3V VOH
1.5V
0V
0V
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH
2. Pulse Generator for All Pulses: f ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns
Output Skew - tSK(X)
6
IDT49FCT3805/A
3.3V CMOS BUFFER/CLOCK DRIVER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
IDT49FCT
XXXX
Device Type
X
Package
X
Package
CORPORATE HEADQUARTERS
2975 Stender Way
Santa Clara, CA 95054
Blank
I
Commercial (0°C to +70°C)
Industrial (-40°C to +85°C)
SO
SOG
PY
PYG
Q
QG
Small Outline IC
SOIC - Green
Shrink Small Outline IC
SSOP - Green
Quarter-size Small Outline IC
QSOP - Green
3805
3805A
Non-Inverting 3.3V Buffer/Clock Driver
for SALES:
800-345-7015 or 408-727-6116
fax: 408-492-8674
www.idt.com
7
for Tech Support:
[email protected]
(408) 654-6459
Similar pages