IDT IDT54FCT162374CTEB Fast cmos 16-bit register (3-state) Datasheet

FAST CMOS 16-BIT
REGISTER (3-STATE)
IDT54/74FCT16374T/AT/CT/ET
IDT54/74FCT162374T/AT/CT/ET
Integrated Device Technology, Inc.
FEATURES:
DESCRIPTION:
• Common features:
– 0.5 MICRON CMOS Technology
– High-speed, low-power CMOS replacement for
ABT functions
– Typical tSK(o) (Output Skew) < 250ps
– Low input and output leakage ≤1µA (max.)
– ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
– Packages include 25 mil pitch SSOP, 19.6 mil pitch
TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack
– Extended commercial range of -40°C to +85°C
– VCC = 5V ±10%
• Features for FCT16374T/AT/CT/ET:
– High drive outputs (-32mA IOH, 64mA IOL)
– Power off disable outputs permit “live insertion”
– Typical VOLP (Output Ground Bounce) < 1.0V at
VCC = 5V, TA = 25°C
• Features for FCT162374T/AT/CT/ET:
– Balanced Output Drivers: ±24mA (commercial),
±16mA (military)
– Reduced system switching noise
– Typical VOLP (Output Ground Bounce) < 0.6V at
VCC = 5V,TA = 25°C
The FCT16374T/AT/CT/ET and FCT162374T/AT/CT/ET
16-bit edge-triggered D-type registers are built using advanced dual metal CMOS technology. These high-speed,
low-power registers are ideal for use as buffer registers for
data synchronization and storage. The Output Enable (xOE)
and clock (xCLK) controls are organized to operate each
device as two 8-bit registers or one 16-bit register with
common clock. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for
improved noise margin.
The FCT16374T/AT/CT/ET are ideally suited for driving
high-capacitance loads and low-impedance backplanes. The
output buffers are designed with power off disable capability
to allow "live insertion" of boards when used as backplane
drivers.
The FCT162374T/AT/CT/ET have balanced output drive
with current limiting resistors. This offers low ground bounce,
minimal undershoot, and controlled output fall times– reducing the need for external series terminating resistors. The
FCT162374T/AT/CT/ET are plug-in replacements for the
FCT16374T/AT/CT/ET and ABT16374 for on-board bus interface applications.
FUNCTIONAL BLOCK DIAGRAM
1OE
2OE
1CLK
2CLK
1D1
2D1
D
D
2O1
1O1
C
C
TO 7 OTHER CHANNELS
TO 7 OTHER CHANNELS
2542 drw 01
2542 drw 01
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
FEBRUARY 1997
1997 Integrated Device Technology, Inc.
5.8
For the latest information regarding this part, please contact IDT's web site at http://www.idt.com or fax-on-demand service at (US)1-800-9-IDT-FAX / (International) 408-492-8391.
DSC-2542/9
1
IDT54/74FCT16374T/AT/CT/ET, 162374T/AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE)
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
PIN CONFIGURATIONS
1OE
1
48
1CLK
1OE
1
48
1CLK
1 O1
2
47
1 D1
1O1
2
47
1 D1
1 O2
3
46
1 D2
1O2
3
46
1 D2
GND
4
45
GND
GND
4
45
GND
1 O3
5
44
1 D3
1O3
5
44
1 D3
1 O4
6
43
1 D4
1O4
6
43
1 D4
VCC
7
42
VCC
VCC
7
42
VCC
1 O5
8
41
1 D5
1O5
8
41
1 D5
1 O6
9
40
1 D6
1O6
9
40
1 D6
GND
10
39
GND
GND
10
39
GND
1 O7
11
38
1 D7
1O7
11
38
1 D7
1 O8
37
1 D8
1O8
12
37
1 D8
2 O1
12 SO48-1
SO48-2
13 SO48-3
36
2 D1
2O1
13
36
2 D1
2 O2
14
35
2 D2
2O2
14
35
2 D2
GND
15
34
GND
GND
15
34
GND
2 O3
16
33
2 D3
2O3
16
33
2 D3
2 O4
17
32
2 D4
2O4
17
32
2 D4
VCC
18
31
VCC
VCC
18
31
VCC
2 O5
19
30
2 D5
2O5
19
30
2 D5
2 O6
20
29
2 D6
2O6
20
29
2 D6
GND
21
28
GND
GND
21
28
GND
2 O7
22
27
2 D7
2O7
22
27
2 D7
2 O8
23
26
2 D8
2O8
23
26
2 D8
2OE
24
25
2CLK
2OE
24
25
2CLK
E48-1
2542 drw 03
2542 drw 04
SSOP/
TSSOP/TVSOP
TOP VIEW
CERPACK
TOP VIEW
5.8
2
IDT54/74FCT16374T/AT/CT/ET, 162374T/AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE)
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
FUNCTION TABLE(1)
PIN DESCRIPTION
Pin Names
xDx
xCLK
Inputs
Description
xDx
xCLK
xOE
xOx
X
L
H
Z
X
H
H
Z
Load
L
L
H
↑
↑
L
Register
L
H
↑
↑
H
Z
Function
Data Inputs
Hi-Z
Clock Inputs
xOx
3-State Outputs.
xOE
3-State Output Enable Input (Active LOW)
2542 tbl 01
Outputs
L
H
H
Z
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don’t Care
Z = High Impedance
↑ = LOW-to-HIGH Transition
ABSOLUTE MAXIMUM RATINGS(1)
CAPACITANCE (TA = +25°C, f = 1.0MHz)
Symbol
Description
Max.
VTERM(2) Terminal Voltage with Respect to –0.5 to +7.0
GND
–0.5 to
VTERM(3) Terminal Voltage with Respect to
GND
VCC +0.5
TSTG
Storage Temperature
–65 to +150
Unit
V
I OUT
mA
DC Output Current
–60 to +120
2542 tbl 02
Symbol
Parameter(1)
CIN
Input
Capacitance
CI/O
I/O
Capacitance
V
°C
Conditions
VIN = 0V
Typ.
3.5
VOUT = 0V
3.5
Max. Unit
6.0
pF
8.0
NOTE:
1. This parameter is measured at characterization but not tested.
pF
2542 lnk 04
2542 lnk 03
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
2. All device terminals except FCT162XXXT Output and I/O terminals.
3. Output and I/O terminals for FCT162XXXT.
5.8
3
IDT54/74FCT16374T/AT/CT/ET, 162374T/AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE)
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Commercial: TA = –40°C to +85°C, V CC = 5.0V ± 10%; Military: TA = –55°C to +125°C, VCC = 5.0V ± 10%
Parameter
Input HIGH Level
Test Conditions(1)
Guaranteed Logic HIGH Level
VIL
Input LOW Level
II H
Input HIGH Current (Input pins)(5)
Symbol
VIH
Min.
2.0
Typ.(2)
—
Max.
Guaranteed Logic LOW Level
—
—
0.8
V
VCC = Max.
—
—
±1
µA
—
—
±1
—
—
±1
—
—
±1
—
—
±1
VI = VCC
Input HIGH Current (I/O pins)(5)
II L
Input LOW Current (Input
pins)(5)
VI = GND
Input LOW Current (I/O pins)(5)
I OZH
High Impedance Output Current
VCC = Max.
VO = 2.7V
pins) (5)
I OZL
(3-State Output
VIK
Clamp Diode Voltage
I OS
Short Circuit Current
VH
Input Hysteresis
I CCL
I CCH
I CCZ
Quiescent Power Supply Current
VO = 0.5V
VCC = Min., I IN = –18mA
VCC = Max., VO =
GND(3)
—
VCC = Max., VIN = GND or VCC
—
Unit
V
µA
—
—
±1
—
–0.7
–1.2
V
–80
–140
–250
mA
—
100
—
mV
—
5
500
µA
2542 lnk 05
OUTPUT DRIVE CHARACTERISTICS FOR FCT16374T
Symbol
IO
Parameter
Output Drive Current
VOH
Output HIGH Voltage
Test Conditions(1)
VCC = Max., VO = 2.5V(3)
Min.
–50
Typ.(2)
—
Max.
–180
Unit
mA
VCC = Min.
2.5
3.5
—
V
2.4
3.5
—
V
2.0
3.0
—
V
—
0.2
0.55
V
—
—
±1
I OH = –3mA
VIN = VIH or V IL
VOL
Output LOW Voltage
I OFF
Input/Output Power Off Leakage(5)
VCC = Min.
VIN = VIH or V IL
VCC = 0V, VIN or V O
I OH = –12mA MIL.
I OH = –15mA COM'L.
I OH = –24mA MIL.
I OH = –32mA COM'L.(4)
I OL = 48mA MIL.
I OL = 64mA COM'L.
≤ 4.5V
µA
2542 lnk 06
OUTPUT DRIVE CHARACTERISTICS FOR FCT162374T
Symbol
I ODL
Parameter
Output LOW Current
Test Conditions(1)
VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V (3)
Min.
60
Typ.(2)
115
Max.
200
Unit
mA
I ODH
Output HIGH Current
VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V(3)
–60
–115
–200
mA
VOH
Output HIGH Voltage
2.4
3.3
—
V
VOL
Output LOW Voltage
VCC = Min.
VIN = VIH or V IL
VCC = Min.
VIN = VIH or V IL
—
0.3
0.55
V
I OH = –16mA MIL.
I OH = –24mA COM'L.
I OL = 16mA MIL.
I OL = 24mA COM'L.
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at Vcc = 5.0V, +25°C ambient.
3. Not more than one output should be tested at one time. Duration of the test should not exceed one second.
4. Duration of the condition can not exceed one second.
5. The test limit for this parameter is ± 5µA at TA = –55°C.
5.8
2542 lnk 07
4
IDT54/74FCT16374T/AT/CT/ET, 162374T/AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE)
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS
Test Conditions(1)
Min.
Typ.(2)
Max.
Unit
—
0.5
1.5
mA
VIN = VCC
VIN = GND
—
60
100
µA/
MHz
VCC = Max.
Outputs Open
fCP = 10MHz
50% Duty Cycle
xOE = GND
fi = 5MHz
50% Duty Cycle
One Bit Toggling
VIN = VCC
VIN = GND
—
0.6
1.5
mA
VIN = 3.4V
VIN = GND
—
1.1
3.0
VCC = Max.
Outputs Open
fCP = 10MHz
50% Duty Cycle
xOE = GND
Sixteen Bits Toggling
fi = 2.5MHz
50% Duty Cycle
VIN = VCC
VIN = GND
—
3.0
5.5 (5)
VIN = 3.4V
VIN = GND
—
7.5
19.0 (5)
Symbol
Parameter
∆ICC
Quiescent Power Supply Current
TTL Inputs HIGH
VCC = Max.
VIN = 3.4V(3)
ICCD
Dynamic Power Supply
Current(4)
VCC = Max.
Outputs Open
xOE = GND
One Input Toggling
50% Duty Cycle
IC
Total Power Supply Current (6)
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCPNCP/2 + fiNi)
ICC = Quiescent Current (ICCL, ICCH and ICCZ)
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
NCP = Number of Clock Inputs at fCP
fi = Input Frequency
Ni = Number of Inputs at fi
5.8
2542 tbl 08
5
IDT54/74FCT16374T/AT/CT/ET, 162374T/AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE)
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
FCT16374T/162374T
Com'l.
Symbol
tPLH
tPHL
tPZH
tPZL
tPHZ
tPLZ
tSU
FCT16374AT/162374AT
Mil.
Com'l.
Condition(1)
Min.(2)
Max.
Min.(2)
Max.
Min.(2)
Max.
Min.(2)
Max.
Unit
Propagation Delay
xCLK to xOx
Output Enable Time
CL = 50pF
RL = 500Ω
2.0
10.0
2.0
11.0
2.0
6.5
2.0
7.2
ns
1.5
12.5
1.5
14.0
1.5
6.5
1.5
7.5
ns
1.5
8.0
1.5
8.0
1.5
5.5
1.5
6.5
ns
2.0
—
2.0
—
2.0
—
2.0
—
ns
1.5
—
1.5
—
1.5
—
1.5
—
ns
7.0
—
7.0
—
5.0
—
6.0
—
ns
—
0.5
—
0.5
—
0.5
—
0.5
ns
Output Disable Time
Set-up Time HIGH
or LOW, xDx to xCLK
tH
Hold Time HIGH
or LOW, xDx to xCLK
tW
xCLK Pulse Width
HIGH or LOW
tSK(o) Output Skew (3)
FCT16374CT/162374CT
Com'l.
Symbol
tPLH
tPHL
tPZH
tPZL
tPHZ
tPLZ
tSU
Mil.
Parameter
Parameter
Condition(1)
Min.(2)
Propagation Delay
xCLK to xOx
Output Enable Time
CL = 50pF
RL = 500Ω
2.0
Output Disable Time
Set-up Time HIGH
or LOW, xDx to xCLK
tH
Hold Time HIGH
or LOW, xDx to xCLK
tW
xCLK Pulse Width
HIGH or LOW
tSK(o) Output Skew (3)
FCT16374ET/162374ET
Mil.
Max.
Min.(2)
5.2
2.0
1.5
5.5
1.5
Com'l.
Mil.
Max.
Min.(2)
Max.
Min.(2)
Max.
Unit
6.2
1.5
3.7
—
—
ns
1.5
6.2
1.5
4.4
—
—
ns
5.0
1.5
5.7
1.5
3.6
—
—
ns
2.0
—
2.0
—
1.5
—
—
—
ns
1.5
—
1.5
—
0.0
—
—
—
ns
5.0
—
6.0
—
3.0 (4)
—
—
—
ns
—
0.5
—
0.5
—
0.5
—
—
NOTES:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed by design.
4. This limit is guaranteed but not tested.
5.8
ns
2542 tbl 09
6
IDT54/74FCT16374T/AT/CT/ET, 162374T/AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE)
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
TEST CIRCUITS AND WAVEFORMS
SWITCH POSITION
TEST CIRCUITS FOR ALL OUTPUTS
V CC
500Ω
Pulse
Generator
Switch
Open Drain
Disable Low
Closed
Enable Low
V OUT
VIN
Test
7.0V
Open
All Other Tests
D.U.T.
50pF
RT
2542 lnk 10
DEFINITIONS:
CL= Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse
Generator.
500Ω
CL
2542 drw 05
SET-UP, HOLD AND RELEASE TIMES
DATA
INPUT
TIMING
INPUT
ASYNCHRONOUS CONTROL
PRESET
CLEAR
ETC.
SYNCHRONOUS CONTROL
PRESET
CLEAR
CLOCK ENABLE
ETC.
tH
tSU
tREM
tSU
PULSE WIDTH
3V
1.5V
0V
3V
1.5V
0V
LOW-HIGH-LOW
PULSE
1.5V
tW
3V
1.5V
0V
HIGH-LOW-HIGH
PULSE
1.5V
3V
1.5V
0V
tH
2542 drw 07
2542 drw 06
PROPAGATION DELAY
ENABLE AND DISABLE TIMES
ENABLE
SAME PHASE
INPUT TRANSITION
tPLH
tPHL
OUTPUT
tPLH
OPPOSITE PHASE
INPUT TRANSITION
tPHL
3V
1.5V
0V
DISABLE
3V
1.5V
CONTROL
INPUT
tPZL
VOH
1.5V
VOL
OUTPUT
NORMALLY
LOW
3V
1.5V
0V
SWITCH
CLOSED
2542 drw 08
SWITCH
OPEN
3.5V
3.5V
1.5V
tPZH
OUTPUT
NORMALLY
HIGH
0V
tPLZ
0.3V
VOL
tPHZ
0.3V
VOH
1.5V
0V
0V
2542 drw 09
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control DisableHIGH
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns
5.8
7
IDT54/74FCT16374T/AT/CT/ET, 162374T/AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE)
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
ORDERING INFORMATION
IDT
XX
XXXX
FCT
Temp. Range
Device Type
X
Package
X
Process
Blank
B
Commercial
MIL-STD-883, Class B
PV
PA
PF
E
Shrink Small Outline Package (SO48-1)
Thin Shrink Small Outline Package (SO48-2)
Thin Very Small Outline Package (SO48-3)
CERPACK (E48-1)
16374T
16374AT
16374CT
16374ET
162374T
162374AT
162374CT
162374ET
Non-Inverting 16-Bit Register
54
74
–55°C to +125°C
–40°C to +85°C
2542 drw 10
5.8
8
Similar pages