IDT7MP4045 IDT7MP4145 256K x 32 CMOS STATIC RAM MODULE Integrated Device Technology, Inc. FEATURES: DESCRIPTION: • High density 1 megabyte static RAM module (IDT7MP4145 upgradeable to 4 megabyte, IDT7MP4120) • Low profile 64 pin ZIP (Zig-zag In-line vertical Package) or 64 pin SIMM (Single In-line Memory Module) for IDT7MP4045 and 72 pin SIMM (Single In-line Memory Module) for IDT7MP4145 The IDT7MP4045/4145 is a 256K x 32 static RAM module constructed on an epoxy laminate (FR-4) substrate using 8 256K x 4 static RAMs in plastic SOJ packages. Availability of four chip select lines (one for each group of two RAMs) provides byte access. The IDT7MP4045 is available with access time as fast as 10ns with minimal power consumption. The IDT7MP4045 is packaged in a 64 pin FR-4 ZIP (Zigzag In-line vertical Package)or a 64 pin SIMM (Single In-line Memory Module) where as the 7MP4145 is packaged in a 72 pin SIMM (Single In-line Memory Module). The 4045 ZIP configuration allows 64 pins to be placed on a package 3.65 inches long and 0.365 inches wide. The 7MP4045 ZIP is only 0.585 inches high, this low profile package is ideal for systems with minimum board spacing while the SIMM configuration allows use of edge mounted sockets to secure the module. All inputs and outputs of the IDT7MP4045/4145 are TTLcompatible and operate from a single 5V supply. Full asynchronous circuitry requires no clocks or refresh for operation and provides equal access and cycle times for ease of use. Identification pins are provided for applications in which different density versions of the module are used. In this way, the target system can read the respective levels of PD pins to determine a 256K depth. The contact pins are plated with 100 micro-inches of nickel covered by 30 micro-inches minimum of selective gold. • Very fast access time: 15ns (max.) • Surface mounted plastic components on an epoxy laminate (FR-4) substrate • Single 5V (±10%) power supply • Multiple GND pins and decoupling capacitors for maximum noise immunity • Inputs/outputs directly TTL-compatible PIN CONFIGURATION – 7MP4045(1) 1 PD 0 I/O0 I/O1 I/O2 I/O3 VCC A7 A8 A9 I/O4 I/O5 I/O6 I/O7 WE A14 CS1 CS3 A16 GND I/O16 I/O17 I/O18 I/O19 A10 A11 A12 A13 I/O20 I/O21 I/O22 I/O23 GND 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ZIP, 34 SIMM TOP VIEW 33 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 GND PD1 I/O8 I/O9 I/O10 I/O11 A0 A1 A2 I/O12 I/O13 I/O14 I/O15 GND A15 PD 0 – GND PD 1 – GND FUNCTIONAL BLOCK DIAGRAM CS1 CS2 CS3 CS4 CS2 ADDRESS 18 2 WE OE CS4 A17 OE I/O24 I/O25 I/O26 I/O27 A3 A4 A5 VCC A6 I/O28 I/O29 I/O30 I/O31 PD 256K x 32 RAM 8 8 8 8 I/O 0-31 2703 drw 02 PIN NAMES I/O0–31 Data Inputs/Outputs A0–17 Addresses CS1–4 WE OE PD0–1 2703 drw 01 NOTE: 1. Pins 2 and 3 (PD0 and PD1) are read by the user to determine the density of the module. If PD0 reads GND and PD1 reads GND, then the module has a 256K depth. Chip Selects Write Enable Output Enable Depth Identification VCC Power GND Ground NC No Connect 2703 tbl 01 The IDT logo is a registered trademark of Integrated Device Technology Inc. COMMERCIAL TEMPERATURE RANGE SEPTEMBER 1996 1996 Integrated Device Technology, Inc. DSC-2703/7 15.2 1 IDT7MP4045/7MP4145 256K x 32 CMOS STATIC RAM MODULE COMMERCIAL TEMPERATURE RANGE PIN CONFIGURATION – 7MP4145(1) CAPACITANCE (TA = +25°C, F = 1.0MHz) Parameter(1) Symbol Conditions Max. Unit Parameter Min. Typ. Max. Unit NC PD3 PD0 I/O0 I/O1 I/O2 I/O3 VCC A7 A8 A9 I/O4 I/O5 I/O6 I/O7 VCC Supply Voltage 4.5 5.0 5.5 V A14 GND Supply Voltage 0 0 0 V VIH Input High Voltage — 6.0 V — 0.8 V CIN(C) Input Capacitance (CS) V(IN) = 0V 20 pF CIN(A) Input Capacitance (Address & Control) V(IN) = 0V 70 pF CI/O I/O Capacitance V(OUT) = 0V 12 pF NOTE: 1. This parameter is guaranteed by design but not tested. 2703 tbl 02 RECOMMENDED DC OPERATING CONDITIONS Symbol VIL Input Low Voltage 2.2 –0.5 (1) NOTE: 1. VIL (min) = –1.5V for pulse width less than 10ns. WE CS1 CS3 A16 GND I/O16 I/O17 I/O18 I/O19 A10 A11 A12 A13 I/O20 I/O21 I/O22 I/O23 GND NC NC 2703 tbl 03 RECOMMENDED OPERATING TEMPERATURE AND SUPPLY VOLTAGE Grade Ambient Temperature GND Commercial 0°C to +70°C 0V VCC 5.0V ± 10% 2703 tbl 04 TRUTH TABLE Mode Standby CS OE WE Output Power H X X High-Z Standby Read L L H DATAOUT Active Write L X L DATAIN Active Read L H H High-Z Active 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 NC PD2 GND PD1 I/O8 I/O9 I/O10 I/O11 A0 A1 A2 I/O12 I/O13 I/O14 I/O15 GND A15 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 CS4 PD0 - GND PD1 - GND PD2 - OPEN PD3 - OPEN CS2 A17 OE I/O24 I/O25 I/O26 I/O27 A3 A4 A5 VCC A6 I/O28 I/O29 I/O30 I/O31 NC NC 2703 drw 15 SIMM TOP VIEW 2703 tbl 05 NOTE: 1. Pins 3,4,6,and 7 (PD0-3) are read by the user to determine the density of the module. If PD0, PD1 read GND and PD2, PD3 read OPEN, then the module has a 256K depth. ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit –0.5 to +7.0 V 0 to +70 °C VTERM Terminal Voltage with Respect to GND TA Operating Temperature TBIAS Temperature Under Bias –10 to +85 °C TSTG Storage Temperature –55 to +125 °C IOUT DC Output Current 50 mA NOTE: 2703 tbl 06 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 15.2 2 IDT7MP4045/7MP4145 256K x 32 CMOS STATIC RAM MODULE COMMERCIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS (VCC = 5.0V ±10%, TA = 0°C to +70°C) Symbol Min. Max. Unit |ILI| Input Leakage (Address and Control) Parameter VCC = Max.; VIN = GND to VCC Test Conditions — 80 µA |ILI| Input Leakage (Data) VCC = Max.; VIN = GND to VCC — 10 µA |ILO| Output Leakage VCC = Max.; CS = VIH, VOUT = GND to VCC — 10 µA VOL Output LOW VCC = Min., IOL = 8mA — 0.4 V VOH Output HIGH VCC = Min., IOH = –4mA 2.4 — V 2703 tbl 07 Symbol Parameter Test Conditions ICC Dynamic Operating Current f = fMAX; CS = VIL VCC = Max.; Output Open ISB Standby Supply Current CS ≥ VIH, VCC = Max. Outputs Open, f = fMAX ISB1 Full Standby Supply Current CS ≥ VCC – 0.2V; f = 0 VIN > VCC – 0.2V or < 0.2V Max. Unit 1360 mA 480 mA 120 mA 2703 tbl AC TEST CONDITIONS Input Pulse Levels GND to 3.0V Input Rise/Fall Times 5ns Input Timing Reference Levels 1.5V Output Reference Levels 1.5V Output Load See Figures 1-4 2703 tbl 09 +5 V +5 V 480 Ω 480 Ω DATAOUT DATAOUT 255Ω *Includes scope and jig. 255Ω 30 pF* 2703 drw 03 Figure 1. Output Load 5 pF* 2703 drw 04 Figure 2. Output Load (for tOLZ,tOHZ, tCHZ, tCLZ, tWHZ, tOW) 15.2 3 IDT7MP4045/7MP4145 256K x 32 CMOS STATIC RAM MODULE COMMERCIAL TEMPERATURE RANGE AC ELECTRICAL CHARACTERISTICS (VCC = 5V ±10%, TA = 0°C to +70°C) ’4045SxxZ, ’4045/4145SxxM –15 Symbol Parameter –20 Min. Max. Min. Max. Unit 15 — 20 — ns Read Cycle tRC Read Cycle Time tAA Address Access Time — 15 — 20 ns tACS Chip Select Access Time — 15 — 20 ns tCLZ(1) Chip Select to Output in Low-Z 3 — 5 — ns tOE Output Enable to Output Valid — 8 — 10 ns tOLZ(1) Output Enable to Output in Low-Z 0 — 0 — ns tCHZ(1) Chip Deselect to Output in High-Z — 8 — 10 ns Output Disable to Output in High-Z — 8 — 10 ns Output Hold from Address Change 3 — 3 — ns tPU (1) Chip Select to Power-Up Time 0 — 0 — ns tPD (1) Chip Deselect to Power-Down Time — 15 — 20 ns tOHZ (1) tOH Write Cycle tWC Write Cycle Time 15 — 20 — ns tCW Chip Select to End-of-Write 12 — 15 — ns tAW Address Valid to End-of-Write 12 — 15 — ns tAS Address Set-up Time 0 — 0 — ns tWP Write Pulse Width 12 — 15 — ns tWR Write Recovery Time 0 — 0 — ns tWHZ(1) Write Enable to Output in High-Z — 8 — 13 ns tDW Data to Write Time Overlap 10 — 12 — ns tDH Data Hold from Write Time 0 — 0 — ns tOW(1) Output Active from End-of-Write 0 — 0 — ns NOTE: 1. This parameter is guaranteed by design but not tested. 2703 tbl 11 15.2 4 IDT7MP4045/7MP4145 256K x 32 CMOS STATIC RAM MODULE COMMERCIAL TEMPERATURE RANGE TIMING WAVEFORM OF READ CYCLE NO. 1(1) tRC ADDRESS tAA OE tOE tOH tOLZ (5) CS tACS tCLZ (5) tOHZ (5) tCHZ (5) DATA OUT 2703 drw 07 TIMING WAVEFORM OF READ CYCLE NO. 2(1,2,4) tRC ADDRESS tAA tOH DATAOUT t OH PREVIOUS DATA VALID DATA VALID 2703 drw 08 TIMING WAVEFORM OF READ CYCLE NO. 3(1,3,4) CS tACS tCLZ (5) tCHZ (5) DATAOUT 2703 drw 06 NOTES: 1. WE is HIGH for Read Cycle. 2. Device is continuously selected. CS = VIL. 3. Address valid prior to or coincident with CS transition LOW. 4. OE = VIL. 5. Transition is measured ±200mV from steady state. This parameter is guaranteed by design, but not tested. 15.2 5 IDT7MP4045/7MP4145 256K x 32 CMOS STATIC RAM MODULE COMMERCIAL TEMPERATURE RANGE TIMING WAVEFORM OF WRITE CYCLE NO. 1 (WE CONTROLLED) (1, 2, 3, 7) tWC ADDRESS OE tAW CS tWP (7) tAS tWR WE tWHZ tOHZ DATA OUT (6) tOHZ (6) tOW(6) (6) (4) (4) tDW DATA IN tDH DATA VALID 2703 drw 10 TIMING WAVEFORM OF WRITE CYCLE NO. 2 (CS CONTROLLED) (1, 2, 3, 5) tWC ADDRESS tAW CS tAS tCW tWR WE tDW DATAIN tDH DATA VALID 2703 drw 11 NOTES: 1. WE or CS must be HIGH during all address transitions. 2. A write occurs during the overlap (tWP) of a LOW CS and a LOW WE. 3. tWR is measured from the earlier of CS or WE going HIGH to the end of write cycle. 4. During this period, I/O pins are in the output state, and input signals must not be applied. 5. If the CS LOW transition occurs simultaneously with or after the WE LOW transition, the outputs remain in a high-impedance state. 6. Transition is measured ±200mV from steady state with a 5pF load (including scope and jig). This parameter is guaranteed by design, but not tested. 7. If OE is LOW during a WE controlled write cycle, the write pulse width must be the larger of tWP or (tWHZ + tDW) to allow the I/O drivers to turn off and data to be placed on the bus for the required tDW. If OE is HIGH during a WE controlled write cycle, this requirement does not apply and the write pulse can be as short as the specified tWP. 15.2 6 IDT7MP4045/7MP4145 256K x 32 CMOS STATIC RAM MODULE COMMERCIAL TEMPERATURE RANGE PACKAGE DIMENSIONS 7MP4045 ZIP VERSION 3.640 3.660 0.585 MAX. PIN 1 0.365 MAX. COMPONENT AREA 0.015 0.025 0.100 TYP. 0.250 TYP. 0.100 TYP. 0.050 TYP. 0.125 0.190 SIDE VIEW FRONT VIEW COMPONENT AREA BACK VIEW PIN 1 2703 drw 12 7MP4045 SIMM VERSION 3.840 3.860 0.365 MAX. 3.580 3.588 0.630 MAX. 0.390 0.410 COMPONENT AREA 0.240 0.260 0.250 TYP. PIN 1 0.050 TYP. 0.045 0.055 SIDE VIEW FRONT VIEW COMPONENT AREA BACK VIEW PIN 1 2703 drw 13 15.2 7 IDT7MP4045/7MP4145 256K x 32 CMOS STATIC RAM MODULE COMMERCIAL TEMPERATURE RANGE 7MP4145 SIMM VERSION 4.240 4.260 0.350 MAX. 3.974 3.994 0.640 0.660 0.390 0.410 0.240 0.260 0.250 TYP. PIN 1 0.050 TYP. 0.045 0.055 SIDE VIEW FRONT VIEW 0.070 0.090 BACK VIEW PIN 1 2703 drw 16 ORDERING INFORMATION IDT XXXXX Device Type X Power X X X Speed Package Process/ Temperature Range Blank Z M 15 20 S Commercial (0°C to +70°C) FR-4 ZIP (Zig-Zag In-line vertical Package, 7MP4045 only) FR-4 SIMM (Single In-line Memory Module) Speed in Nanoseconds Standard Power 7MP4045 7MP4145 256K x 32 Static RAM Module 256K x 32 Static RAM Module 2703 drw 14 15.2 8