Microdc IE0509XS-2W Fixed input,isolated & regulated dual output dc/dc converter Datasheet

IE-XS-2W Series
FIXED INPUT,ISOLATED & REGULATED Dual Output DC/DC Converter
SELECTION GUIDE
Input
Output
Switching
Frequency
(KHz,Typ)
Nominal
Range
IE0505XS-2W
5
4.75-5.25
±5
±100
±10
70
85
IE0509XS-2W
5
4.75-5.25
±9
±56
±6
61
83
IE0512XS-2W
5
4.75-5.25
±12
±42
±5
62
83
IE0515XS-2W
5
4.75-5.25
±15
±33
±4
64
250
IE1205XS-2W
12
11.4-12.6
±5
±100
±10
75
120
IE1209XS-2W
12
11.4-12.6
±9
±56
±6
61
83
IE1212XS-2W
12
11.4-12.6
±12
±42
±5
65
83
IE1215XS-2W
12
11.4-12.6
±15
±33
±4
64
83
IE2405XS-2W
24
22.8-25.2
±5
±100
±10
78
83
IE2409XS-2W
24
22.8-25.2
±9
±56
±6
69
83
2 Watt load,-40°C to 85°C
IE2412XS-2W
24
22.8-25.2
±12
±42
±5
63
83
◆UL 94V-0 package material
IE2415XS-2W
24
22.8-25.2
±15
±33
±4
74
300
FEATURES
◆RoHS compliant
◆Efficiency up to 83%
◆SIP Package
◆Wide temperature performance at full
Voltage(VDC)
Current(MA)
Efficiency
(%,Typ)
Voltage
(VDC)
Order code
Max
Min
◆No heatsink required
◆Low ripple and good EMC Features
◆Industry standard pinout
◆Power sharing on output
◆3KVDC isolation
◆Continuous Short Circuit Protection
ISOLATION SPECIFICATIONS
◆Internal SMD construction
◆No external components required
◆Good dynamic feature
Parameter
Test conditions
Min.
Isolation test voltage
Flash tested for 1 minute and 1mA max
3000
Typ.
Max.
Units
VDC
Isolation resistance
Test at Viso=500VDC
1000
MΩ
MODEL SELECTION
IE①05②05③X④ S⑤-2W⑥
①Product Series
③Output Voltage
⑤SIP Package
②Input Voltage
④Fixed Input
⑥Rated Power
OUTPUT SPECIFICATIONS
APPLICATIONS
Parameter
Test conditions
Min
Typ.
Max.
Units
The IE_XS-2W series are specially designed for applications
where a group of polar power supplies are isolated from the
Output power
2
W
input power supply in a distributed power supply system on a
Line regulation
For Vin change of ±5%
±0.5
%
Load regulation
10% to 100% full load
±1.5
%
circuit board.
These products apply to:
1) where the voltage of the input power supply is fixed
(voltage variation ≤±5%);
2) where isolation is necessary between input and output
0.2
Output voltage accuracy
100% full load
±3
%
Temperature drift
100% full load
0.03
%/°C
(isolation voltage ≤3000VDC);
Output Ripple*
20MHz Bandwidth
20
30
MV p-p
3) where the regulation of the output voltage and the output
Output Noise*
20MHz Bandwidth
50
150
MV p-p
Full load,nominal input
100
ripple noise are demanded.
Switching frequency
Khz
* Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power
Converter section, application notes.
MICRODC reserves the copyright
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
IE-XS-2W Series
Filtering
TEMPERATURE CHARACTERISTICS
Parameter
Conditions
Min.
Typ.
Storage humidity range
Operating temperature
-40
Storage temperature
Lead temperature
-55
1.5mm from case for 10 seconds
40
Temp.rise at full load
Cooling
Max.
Units
95
%
85
°C
125
°C
58
°C
300
°C
To get an extreme low ripple,an "LC"filtering network
may be connected to the input and output ends of the
DC/DC converter.Which may produce a more significant
filtering effect.It should also be noted that the inductance
and the frequency of the "LC"filtering network should be
staggered with the DC/DC frequency to avoid mutual
interference see (Figure 1).
Free air convection
Case material
Plastic(UL94-V0)
IE-XS-2W
Continuous
Short circuit protection
1
MTBF
S
3500
K hours
Weight
5.2
g
*Supply voltage must be discontinued at the end of short circuit duration.
In some circuits which are sensitive to noise and
ripple.a filtering capacitor may be added to the DC/DC
output end and input end to reduce the noise and ripple.
However, the capacitance of the output filter capacitor
must be proper. If the capacitance is too big, a startup
problem might arise. For every channel of output,
provided the safe and reliable operation is ensured,
the greatest capacitance
of its filter capacitor sees
(Table 1).
TYPICAL CHARACTERISTICS
Temperature Derating Graph
EXTERNAL CAPACITOR TABLE (TABLE 1)
Cin
Vout
Vin
(VDC)
5
(μF)
4.7
Cout
(VDC)
±5
(μF)
4.7
12
2.2
±9
2.2
24
0.47
±12
1.0
It's not recommend to connect any external capacitor in
the application field with less than 0.5 watt output.
OUTLINE DIMENSIONS & PIN CONNECTIONS
SIZE Graph
RECOMMENDED FOOTPRINT
Top view,grid:2.54mm(0.1inch)
diameter:1.00mm(0.039inch)
Overload Protection
Under normal operating conditions , the output circuit of
these products has no protection against over-current
and short-circuits.The simplest method is to connect a
self-recovery fuse in series at the input end or add a
circuit breaker to the circuit.
FOOTPRINT DETAILS
Pin
Note:
Unit:mm(inch)
Pin section:0.50*0.3mm(0.020*0.012inch)
Pin section tolerances:±0.10mm(±0.004inch)
General tolerances:±0.25mm(±0.010inch)
Function
1
VIN
2
GND
7
+V0
9
-V0
10
0V
When the environment temperature is higher than
71
C, the product output power should be less then
71°C,
60% of the rated power.
No parallel connection or plug and play.
Use dual output simultaneously, forbid opening
Output pin (0V) to use as single output.
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise
specified.Another 24V products, please inquire Our technical department!
Requirement on output load
To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of
DC/DC converter in addition to a maximum load(namely full load).During operation, make sure the
specified range of input voltage is not exceeded,the minimum output load is not less than 10
10% of the full
load, and that this product should never be operated under no load!
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646
REACH COMPLIANT INFORMATION
E-mail:[email protected]
Website:http://www.microdc.cn
http://www.microdc.cn
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2
Similar pages