Fairchild ILC5062M29X Sot-23 power supply reset monitor with 1% precision Datasheet

www.fairchildsemi.com
ILC5062
SOT-23 Power Supply reset Monitor with 1% precision
Features
Description
•
•
•
•
•
•
•
All-CMOS voltage monitoring circuit in either a 3-lead
SOT-23 or SC70 package offers the best performance in
power consumption and accuracy.
All-CMOS design in SOT-23 or SC70 package
A grade ±1% precision in Reset Detection
Standard grade : ±2% precision in Reset Detection
Only 1µA of Iq
Over 2mA of sink current capability
Built-in hysteresis of 5% of detection voltage
Voltage options of 2.6, 2.7, 2.8, 2.9, 3.1, 4.4, and 4.6V fit
most supervisory applications
• Active low push-pull output
Additionally, a built-in hysteresis of 5% of detect voltage
simplifies system design.
Applications
•
•
•
•
The ILC5062 is available in a series of ±1% (A-grade) or 2%
(standard grade) accurate trip voltages to fit most microprocessor applications. Even though its output can sink over
2mA, the device draws only 1µA in normal operation.
Microprocessor reset circuits
Memory battery back-up circuitry
Power-on reset circuits
Portable and battery powered electronics
Block Diagram
Pin-Package Configurations
Top View
VIN
VOUT
1
VOUT
1
VOUT
SC-70
VREF
VSS
2
3
SOT-23
VIN
VSS
3
VIN
2
VSS
Complementary CMOS Output
Rev. 2.2 8/14/02
PRODUCT SPECIFICATION
ILC5062
Absolute Maximum Ratings
Parameter
Symbol
Ratings
Units
Input Voltage
VIN
12
V
Output Current
IOUT
50
mA
Output Voltage
VOUT
VSS-0.3~VIN=+0.3
V
Continuous Total
Power Dissipation (SOT-23)
PD
150
mW
Operating Ambient Temperature
Topr
-30~+80
°C
Storage Temperature
Tstg
-40~+125
°C
Electrical Characterisitcs ILC5062 (TA=25°C)
Parameter
Detect Fail Voltage
Detect Fail Voltage
Hysteresis Range
Supply Current
Symbol
VDF
VDF
VHYS
ISS
Operating Voltage
Output Current
VIN
IOUT
Conditions
A grade
Standard grade
VIN = 1.5V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VDF = 2.1 ~ 6.0V
N-ch VDS = 0.5V
VIN = 1.0V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
Min.
VDF X 0.99
VDF X 0.98
VDF X 0.02
1.5
Max.
VDF X 1.01
VDF X 1.02
VDF X 0.08
2.6
3.0
3.4
3.8
4.2
10.0
2.2
7.7
10.1
11.5
13.0
P-Ch VDS = 2.1V
VIN = 8V
Temperature Characteristics ∆VDF/(∆Topr•VDF) -30°C < Topr < 80°C
Delay Time (Release
tDLY
Voltage
Output Inversion) (VDR to VOUT
Inversion)
Typ.
VDF
VDF
VDF X 0.05
0.9
1.0
1.3
1.6
2.0
Units
V
V
V
µA
V
mA
-10
-200
±100
+200
0.1
ppm/°C
ms
Note1: An additional resistor between the VIN pin and supply voltage may cause deterioration of the characteristics due to
increasing of VDR.
Note2: Vout=Gnd when 1V< VIN <1.5V
Note3: Iout < 10uA when VIN <1V
Rev. 2.2 8/14/02
2
PRODUCT SPECIFICATION
ILC5062
Functional Description
The following designators 1~6 refer to the timing diagram below.
1. While the input voltage (VIN) is higher than the detect voltage (VDF), the output voltage at VOUT pin equals the input voltage at VIN pin.
2. When the input VIN voltage falls lower than VDF, VOUT drops near ground voltage.
3. If the input voltage decreases below the minimum operating voltage (VMIN), the VOUT output voltage will be undefined.
4. During an increase of the input voltage from the VSS voltage, VOUT is undefined at the voltage below VMIN. Exceeding the
VMIN level, the ouput stays at the ground level (VSS) between the minimum operating voltage (VMIN) and the detect release
voltage (VDR).
5. If the input voltage increases more than VDR, the output voltage at VOUT pin equals the input voltage at VIN pin.
6. The difference between VDR and VDF is the hysteresis in the system.
INPUT VOLTAGE (VIN)
DETECT RELEASE VOLTAGE (VDR)
6
DETECT FAIL VOLTAGE (VDF)
MINIMUM OPERATING VOLTAGE (VMIN)
GROUND VOLTAGE (VSS)
OUTPUT VOLTAGE (VOUT)
GROUND VOLTAGE (VSS)
1
Rev. 2.2 8/14/02
2
3
4
5
3
ILC5062
PRODUCT SPECIFICATION
Typical Performance Characteristics - General conditions for all curves
Supply Current vs Input Voltage
Supply Current vs Input Voltage
ILC5062M-27
4
TA = 80˚C
3
25˚C
2
-30˚C
1
SUPPLY CURRENT ISS (µA)
SUPPLY CURRENT ISS (µA)
4
ILC5062M-44
TA = 80˚C
3
25˚C
2
-30˚C
1
0
0
0
1
2
3
4
5
6
9
8
7
0
10
1
2
ILC5062M-27
80
5
6
8
7
9
10
30
VIN = 2.5V
20
2.0V
10
1.5V
ILC5062M-44
VIN = 4.0V
OUTPUT CURRENT:IOUTNch (mA)
OUTPUT CURRENT:IOUTNch (mA)
4
N-ch Driver Output Current vs VDS
N-ch Driver Output Current vs VDS
40
3
INPUT VOLTAGE VIN (V)
INPUT VOLTAGE VIN (V)
70
60
3.5V
50
3.0V
40
30
2.5V
20
2.0V
10
1.5V
0
0
0
0.5
1.0
1.5
3.0
2.5
2.0
0
1
4
3
2
VDS (V)
VDS (V)
VOUT vs VIN
VOUT vs VIN
OUTPUT VOLTAGE:VOUT (V)
OUTPUT VOLTAGE:VOUT (V)
4
6
ILC5062M-27
TA = 80˚C
25˚C
-30˚C
3
2
1
TA = 80˚C
25˚C
-30˚C
5
4
3
2
1
0
0
0
1
2
3
INPUT VOLTAGE VIN (V)
4
ILC5062M-44
4
0
1
2
3
4
5
6
INPUT VOLTAGE VIN (V)
Rev. 2.2 8/14/02
PRODUCT SPECIFICATION
ILC5062
Typical Performance Characteristics - General conditions for all curves
N-ch Driver Output Current vs Input Voltage
N-ch Driver Output Current vs Input Voltage
20
ILC5062M-27
25
ILC5062M-44
VDS = 0.5V
OUTPUT CURRENT:IOUTNch (mA)
OUTPUT CURRENT:IOUTNch (mA)
VDS = 0.5V
TA = -30˚C
15
25˚C
10
80˚C
5
25˚C
15
80˚C
10
5
0
0
1.0
0.5
2.0
1.5
2.5
TA = -30˚C
20
0
3.0
0
5
P_ch Driver Output Current vs Input Voltage
ILC5062M-27
12
8
OUTPUT CURRENT:IOUTpch (mA)
VDS = 2.1V
OUTPUT CURRENT:IOUTpch (mA)
4
3
INPUT VOLTAGE VIN (V)
P_ch Driver Output Current vs Input Voltage
10
2
1
INPUT VOLTAGE VIN (V)
1.5V
6
1.0V
4
0.5V
2
ILC5062M-44
VDS= 2.1V
10
1.5V
8
6
1.0V
4
0.5V
2
0
0
0
0
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
INPUT VOLTAGE VIN (V)
10
INPUT VOLTAGE VIN (V)
VDR and VDF vs Temperature
RELEASE VOLTAGE:VDF and
RELEASE VOLTAGE:VDR
ILC5062M-27
3.0
2.9
VDR (V)
2.8
2.7
VDF (V)
2.6
2.5
-40
-20
0
20
40
60
80
AMBIENT TEMPERATURE:TA
Rev. 2.2 8/14/02
5
ILC5062
PRODUCT SPECIFICATION
SOT-23
0.021
0.015
0.055
0.047
0.098
0.083
0.120
0.105
0.0059
0.0035
0.040
0.031
0.079
0.071
0-8û
0.010
0.005
0.004
0.001
0.76
2.29
PKG
CL
0.76
0.95
LAND PATTERN RECOMMENDATION
6
Rev. 2.2 8/14/02
PRODUCT SPECIFICATION
ILC5062
SC70
.087 (2.2)
.071 (1.8)
.053 (1.35)
.045 (1.15)
.087 (2.2)
.079 (2.0)
.009 (.23)
.005 (.13)
.043 (1.1)
.032 (.80)
.004 (.10)
.010 (.25)
.004 (.10)
.016 (.40)
.012 (.30)
.026
(.65)
.018 (.45)
.006 (.15)
.052
(1.3)
0.65
0.5
0.6
1.80
0.65
Land Pattern Recommendation
Rev. 2.2 8/14/02
7
PRODUCT SPECIFICATION
ILC5062
Ordering Information
PART
NUMBER
TOP
MARKING
RESET
THRESHOLD (V)
OUTPUT
TYPE
PACKAGE
PACKING
METHOD
ILC5062AM23X
C3AY
2.3 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM24X
C4AY
2.4 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM25X
C5AY
2.5 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM26X
C6AY
2.6 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM27X
C7AY
2.7 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM28X
C8AY
2.8 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM29X
C9AY
2.9 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM30X
D0AY
3.0 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM31X
D1AY
3.1 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM37X
D7AY
3.7 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM44X
E4AY
4.4 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062AM46X
E6AY
4.6 ± 1 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M23X
C3Y
2.3 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M24X
C4Y
2.4 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M25X
C5Y
2.5 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M26X
C6Y
2.6 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M27X
C7Y
2.7 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M28X
C8Y
2.8 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M29X
C9Y
2.9 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M30X
D0Y
3.0 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M31X
D1Y
3.1 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M37X
D7Y
3.7 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M44X
E4Y
4.4 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
ILC5062M46X
E6Y
4.6 ± 2 %
Push-Pull, active low
3-Pin, SOT23
3K units in T&R
Note 1: Last digit in the "Top Marking" information (represented by "Y" in the above table) represents internal assembly lot
number
Note 2: Orientation of Tape & Reeled devices is Right.
Rev. 2.2 8/14/02
8
ILC5062
PRODUCT SPECIFICATION
Ordering Information
PART
NUMBER
TOP
MARKING
RESET
THRESHOLD (V)
OUTPUT
TYPE
PACKAGE
PACKING
METHOD
ILC5062AIC23X
C3AY
2.3 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC24X
C4AY
2.4 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC25X
C5AY
2.5 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC26X
C6AY
2.6 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC27X
C7AY
2.7 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC28X
C8AY
2.8 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC29X
C9AY
2.9 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC30X
D0AY
3.0 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC31X
D1AY
3.1 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC37X
D7AY
3.7 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC44X
E4AY
4.4 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062AIC46X
E6AY
4.6 ± 1 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC23X
C3Y
2.3 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC24X
C4Y
2.4 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC25X
C5Y
2.5 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC26X
C6Y
2.6 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC27X
C7Y
2.7 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC28X
C8Y
2.8 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC29X
C9Y
2.9 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC30X
D0Y
3.0 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC31X
D1Y
3.1 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC37X
D7Y
3.7 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC44X
E4Y
4.4 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
ILC5062IC46X
E6Y
4.6 ± 2 %
Push-Pull, active low
3-Pin, SC70
3K units in T&R
Note 1: Last digit in the "Top Marking" information (represented by "Y" in the above table) represents internal assembly lot
number
Note 2: Orientation of Tape & Reeled devices is Right.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
8/14/02 0.0m 001
Stock#DSxxxxxxxx
2002 Fairchild Semiconductor Corporation
Similar pages