Vishay ILD610-4X009 Optocoupler, phototransistor output, dual channel Datasheet

ILD610
Vishay Semiconductors
Optocoupler, Phototransistor Output, Dual Channel
FEATURES
• Dual version of SFH610 series
A 1
8 E
• Isolation test voltage, 5300 VRMS
C 2
7 C
• VCEsat 0.25 (≤ 0.4) V at IF = 10 mA, IC = 2.5 mA
A 3
6 E
• VCEO = 70 V
C 4
5 C
• Lead (Pb)-free component
• Component in accordance to
2002/95/EC and WEEE 2002/96/EC
i179045
RoHS
AGENCY APPROVALS
DESCRIPTION
• UL1577, file no. E52744 system code H or J, double
protection
The ILD610 series is a dual channel optocoupler series for
high density applications. Each channel consists of an
optically coupled pair with a gallium arsenide infrared LED
and silicon NPN phototransistor. Signal information,
including a DC level, can be transmitted by the device while
maintaining a high degree of electrical isolation between
input and output. The ILD610 series is the dual version of
SFH610 series and uses a repetitive pin-out configuration
instead of the more common alternating pin-out used in most
dual couplers.
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending
available with option 1
• CSA 93751
• BSI IEC 60950 IEC 60065
ORDER INFORMATION
PART
REMARKS
ILD610-1
CTR 40 to 80 %, DIP-8
ILD610-2
CTR 63 to 125 %, DIP-8
ILD610-3
CTR 100 to 200 %, DIP-8
ILD610-4
CTR 160 to 320 %, DIP-8
ILD610-2X007
CTR 63 to 125 %, SMD-8 (option 7)
ILD610-3X006
CTR 100 to 200 %, DIP-8 400 mil (option 6)
ILD610-3X009
CTR 100 to 200 %, SMD-8 (option 9)
ILD610-4X009
CTR 160 to 320 %, SMD-8 (option 9)
Note
For additional information on the available options refer to option information.
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
t ≤ 1.0 ms
VR
IFSM
Pdiss
6.0
1.5
100
1.3
60
V
A
mW
mW/°C
mA
70
50
100
150
2.0
V
mA
mA
mW
mW/°C
INPUT
Reverse voltage
Surge forward current
Power dissipation
Derate linearly from 25 °C
Forward continuous current
OUTPUT
Collector emitter voltage
Collector current
Power dissipation
Derate linearly from 25 °C
Document Number: 83651
Rev. 1.8, 09-Jan-08
IF
t ≤ 1.0 ms
VCE
IC
IC
Pdiss
For technical questions, contact: [email protected]
www.vishay.com
1
ILD610
Optocoupler, Phototransistor
Output, Dual Channel
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Isolation test voltage
t = 1.0 s
Isolation resistance
VIO = 500 V, Tamb = 25 °C
VIO = 500 V, Tamb = 100 °C
VISO
5300
VRMS
Storage temperature
RIO
RIO
Tstg
≥ 1012
≥ 1011
- 55 to + 150
Ω
Ω
°C
Operating temperature
Tamb
- 55 to + 100
°C
Tj
100
°C
10
s
COUPLER
Junction temperature
Lead soldering time at 260 °C
Note
Tamb = 25 °C, unless otherwise specified.
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied
at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for
extended periods of the time can adversely affect reliability.
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
IF = 60 mA
VF
1.25
1.65
V
Reverse current
VR = 6.0 V
IR
0.01
10
µA
VR = 0 V, f = 1.0 MHz
CO
25
pF
V
Capacitance
OUTPUT
Collector emitter breakdown
voltage
IC = 10 mA, IE = 10 µA
Collector emitter dark current
VCE = 10 V
Collector emitter capacitance
VCE = 5.0 V, f = 1.0 MHz
VCE = 10 V
Collector emitter leakage current
BVCEO
70
90
BVCEO
6.0
7.0
ICEO
2.0
V
50
nA
50
nA
CCE
7.0
ILD610-1
ICEO
2.0
pF
ILD610-2
ICEO
2.0
50
nA
ILD610-3
ICEO
5.0
100
nA
ILD610-4
ICEO
5.0
100
nA
VCEsat
0.25
0.40
V
CC
0.35
COUPLER
Collector emitter saturation
voltage
IF = 10 mA, IC = 2.5 mA
Coupling capacitance
pF
Note
Tamb = 25 °C, unless otherwise specified.
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO
PARAMETER
TEST CONDITION
IF = 10 mA, VCE = 5.0 V
CTR (1)
IF = 1.0 mA, VCE = 5.0 V
PART
SYMBOL
MIN.
ILD610-1
CTR
40
TYP.
MAX.
80
UNIT
%
ILD610-2
CTR
63
125
%
ILD610-3
CTR
100
200
%
ILD610-4
CTR
160
320
ILD610-1
CTR
13
%
ILD610-2
CTR
22
%
ILD610-3
CTR
34
%
ILD610-4
CTR
56
%
%
Note
(1) CTR will match within a ratio of 1.7:1
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 83651
Rev. 1.8, 09-Jan-08
ILD610
Optocoupler, Phototransistor
Output, Dual Channel
Vishay Semiconductors
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
NON-SATURATED
ILD610-1
Rise time
Fall time
Turn-on time
Turn-off time
VCC = 5.0 V, RL = 75 Ω,
IF = 10 mA
VCC = 5.0 V, RL = 75 Ω,
IF = 10 mA
VCC = 5.0 V, RL = 75 Ω,
IF = 10 mA
VCC = 5.0 V, RL = 75 Ω,
IF = 10 mA
ILD610-2
ILD610-3
2.0
tr
2.5
2.9
ILD610-4
3.3
ILD610-1
2.0
ILD610-2
ILD610-3
tf
2.6
3.1
ILD610-4
3.5
ILD610-1
3.0
ILD610-2
ILD610-3
ton
3.2
3.6
ILD610-4
2.3
ILD610-1
2.9
ILD610-2
ILD610-3
toff
3.4
3.7
ILD610-4
4.1
ILD610-1
2.0
µs
µs
µs
µs
SATURATED
Rise time
VCC = 5.0 V, RL = 1.0 kΩ,
IF = 5.0 mA
ILD610-2
ILD610-3
tr
ILD610-4
Fall time
Turn-on time
VCC = 5.0 V, RL = 1.0 kΩ,
IF = 5.0 mA
VCC = 5.0 V, RL = 1.0 kΩ,
IF = 5.0 mA
Turn-off time
11
ILD610-2
2.6
ILD610-3
tf
3.1
ILD610-4
15
ILD610-1
3.0
ILD610-2
ILD610-3
ton
4.3
4.6
µs
µs
6.0
ILD610-1
18
ILD610-2
2.9
ILD610-3
µs
4.6
toff
ILD610-4
Document Number: 83651
Rev. 1.8, 09-Jan-08
3.3
ILD610-1
ILD610-4
VCC = 5.0 V, RL = 1.0 kΩ,
IF = 5.0 mA
2.8
For technical questions, contact: [email protected]
3.4
µs
25
www.vishay.com
3
ILD610
Optocoupler, Phototransistor
Output, Dual Channel
Vishay Semiconductors
TYPICAL CHARACTERISTICS
Tamb = 25 °C, unless otherwise specified
1.4
1.5
Tamb = - 55 °C
1.2
Tamb = 25 °C
1.1
1.0
0.9
Normalized to:
VCE = 10 V, I F = 10 mA
Tamb = 25 °C
NCTR - Normalized CTR
VF - Forward Voltage (V)
1.3
Tamb = 85 °C
1.0
CTRCE(sat) VCE = 0.4 V
Tamb= 70 °C
0.5
NCTR(SAT)
NCTR
0.8
0.0
0.7
0.1
1
10
IF - Forward Current (mA)
100
1
10
100
iilct6_04
Fig. 1 - Forward Voltage vs. Forward Current
1.5
Fig. 4 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
1.5
Normalized to:
VCE = 10 V, I F = 10 mA
Tamb = 25 °C
CTRCE(sat) VCE = 0.4 V
1.0
0.5
NCTR(SAT)
NCTR
0.0
0.1
1
10
Normalized to:
VCE = 10 V, IF = 10 mA, Tamb = 25 °C
CTRCE(sat) VCE = 0.4 V
NCTR - Normalized CTR
NCTR - Normalized CTR
0.1
I F - LED Current (mA)
iilct6_01
1.0
Tamb = 85 °C
0.5
NCTR(SAT)
NCTR
0.0
100
0.1
1
I F - LED Current (mA)
10
100
IF - LED Current (mA)
iilct6_02
iilct6_05
Fig. 2 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Fig. 5 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
35
Normalized to:
VCE = 10 V, I F = 10 mA, TA = 25 °C
ICE - Collector Current (mA)
NCTR - Normalized CTR
1.5
CTRce(sat)VCE = 0.4 V
1.0
TA = 50 °C
0.5
NCTR(SAT)
NCTR
25
50 °C
20
15
70 °C
25 °C
85 °C
10
5
0
0.0
0.1
1
10
100
0
I F - LED Current (mA)
iilct6_06
iilct6_03
Fig. 3 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
www.vishay.com
4
30
10
20
30
40
50
60
IF - LED Current (mA)
Fig. 6 - Collector Emitter Current vs. Temperature and LED Current
For technical questions, contact: [email protected]
Document Number: 83651
Rev. 1.8, 09-Jan-08
ILD610
Optocoupler, Phototransistor
Output, Dual Channel
Vishay Semiconductors
VCC = 5 V
ICEO - Collector Emitter (nA)
10 5
10 4
F = 10 kHz,
DF = 50 %
10 3
RL
10 2
Vce = 10 V
10 1
Typical
10 0
VO
IF = 10 mA
10 - 1
10 - 2
- 20
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
iild610_10
iilct6_07
Fig. 7 - Collector Emitter Leakage Current vs.Temperature
1000
tpHL
100
2.0
10
1.5
tpLH
1
0.1
1
tpHL - Propagation Delay (µs)
2.5
Tamb = 25 °C, IF = 10 mA
VCC = 5 V, Vth = 1.5 V
tpLH - Propagation (µs)
Fig. 10 - Non-Saturated Switching Schematic
1.0
100
10
R L - Collector Load Resistor (kΩ)
Input
toff
ton
tpdoff
tpdon
Output
td
tr
10 %
ts
tr
10 %
50 %
50 %
90 %
90 %
iild610_11
iilct6_08
Fig. 8 - Propagation Delay vs. Collector Load Resistor
Fig. 11 - Saturated Switching Time Test Waveform
IF
tD
tR
VO
t PLH
V TH = 1.5 V
t PHL
iild610_09
tS
tF
Fig. 9 - Switching Timing
Document Number: 83651
Rev. 1.8, 09-Jan-08
For technical questions, contact: [email protected]
www.vishay.com
5
ILD610
Optocoupler, Phototransistor
Output, Dual Channel
Vishay Semiconductors
PACKAGE DIMENSIONS in inches (millimeters)
Pin one ID
4
3
2
1
5
6
7
8
0.255 (6.48)
0.268 (6.81)
ISO method A
0.379 (9.63)
0.390 (9.91)
0.030 (0.76)
0.045 (1.14)
0.300 (7.62)
typ.
0.031 (0.79)
4° typ.
0.130 (3.30)
0.150 (3.81)
0.050 (1.27)
0.020 (0.51)
0.018 (0.46)
0.022 (0.56)
0.230 (5.84)
10°
0.035 (0.89)
0.100 (2.54) typ.
i178006
0.110 (2.79)
0.008 (0.20)
0.012 (0.30)
Option 6
Option 7
Option 9
0.407 (10.36)
0.391 (9.96)
0.307 (7.8)
0.291 (7.4)
0.300 (7.62)
typ.
0.375 (9.53)
0.395 (10.03 )
0.300 (7.62)
ref.
0.028 (0.7)
min.
0.315 (8.0)
min.
0.014 (0.35)
0.010 (0.25)
0.400 (10.16)
0.430 (10.92)
www.vishay.com
6
0.250 (6.35)
0.130 (3.30)
3° to 9°
0.331 (8.4)
min.
0.406 (10.3)
max.
0.180 (4.6)
0.160 (4.1) 0.0040 (0.102)
0.0098 (0.249)
0.012 (0.30 ) typ.
0.020 (0.51 )
0.040 (1.02 )
15° max.
0.315 (8.00)
min.
For technical questions, contact: [email protected]
18450
Document Number: 83651
Rev. 1.8, 09-Jan-08
ILD610
Optocoupler, Phototransistor
Output, Dual Channel
Vishay Semiconductors
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with
respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone
depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use
within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in
the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency
(EPA) in the USA.
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do
not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer application by the
customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall
indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any
claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Document Number: 83651
Rev. 1.8, 09-Jan-08
For technical questions, contact: [email protected]
www.vishay.com
7
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages