MACOM IM01TS The best relaytion Datasheet

The Best Relaytion
IM Relay
108-98001
Rev. D
EC-JM00-0009-03
ECOC: JM10
1. Apr. 04
IM Relay
Slim line AND low profile
2 pole telecom/signal relay, polarized
Through Hole Types (THT), standard version
with 5.08 mm, narrow version with 3.2 mm between
the terminal rows
or
Surface Mount Type (SMT)
Relay types:
non-latching with 1 coil
latching with 1 coil
Features
- Telecom/signal relay (dry circuit, test access, ringing)
- Slim line10 x 6 mm, 0.39 x 0.24 inch
- Low profile 5.65 mm, 0.222 inch
- Minimum board-space 60 mm2
- Switching current 2 A
- 2 changeover contacts (2 form C / DPDT)
- Bifurcated contacts, gold plated
- High sensitivity results in low nominal power consumption
140 mW for non latching standard
100 mW for latching version and non latching high sensitive
version
- High surge capability (1.2/50 µs and 10/700 µs) meets
Bellcore GR 1089, FCC Part 68 and ITU-T K20, 21, 45
³1500 V between open contacts
³ 2500 V between coil and contacts
- High mechanical shock resistance
up to 300 G functional
up to 500 G survival
Typical applications:
- Communications equipment
Linecard application – analog, ISDN, xDSL,
PABX
Voice over IP
- Office and business equipment
- Measurement and control equipment
UL 508
UL 60950
- Consumer electronics
Set top boxes, HiFi
File No. E111441
- Medical equipment
Options:
CECC 61811-51:01
(QC 160501)
Surge capability ³ 2500 V between open contacts
IEC/EN60950
IEC Ref. Cert. No. 2170
Insulation category:
European Directive conformance:
Supplementary insulation according IEC/EN 60950
Working voltage
£ 300 Vrms
Mains supply voltage
SMT: 250 Vrms
THT: 200 Vrms
Repetitive peak voltage
2500 V
Pollution degree:
External:
2
Internal:
1
Flammability classification:
V-0
Maximum operating temperature: 85°C
IM relay product conformance according to:
Directive 2000/53/EC: ELV (End of Life of Vehicles)
Directive 2002/95/EC: ROHS (Restrictions of the
use of certain hazardous substances in electrical and
electronic equipment)
Compliance is evidenced by written declaration from all raw
material suppliers.
Tyco Electronics AXICOM only has responsibility for the proper
processing of these materials.
Confirmation is valid for date codes ≥ 0438
Page 2 (11)
108-98001 Rev. D
IM Relay
Dimensions
IM THT
Standard
mm
L
W
H
T
T1
T2
D1
D2
Tw
S
10 ±0.08
6 ±0.08
5.65 -0.2
3.2
N/A
5.08±0.1
3.2 ±0.15
2.2 ±0.15
0.4
0.3 ±0.05
inch
IM THT
Narrow
0.393 ±0.003
0.236 ±0.003
0.222 -0.008
0.125
N/A
0.200 ±0.004
0.126 ±0.006
0.087 ±0.006
0.015
0.011 ±0.002
mm
10 ±0.08
5.7 ±0.3
5.85 -0.15
3.2
N/A
3.2±0.1
3.2 ±0.15
2.2 ±0.15
0.4
0.3 ±0.05
inch
IM SMT
Gull Wings
mm
0.393 ±0.003 10 ±0.08
0.224 ±0.012 6 ±0.08
0.230 -0.006 5.65 -0.2
0.125
N/A
N/A
7.5 ±0.3
0.126 ±0.006 5.08 ±0.1
0.126 ±0.006 3.2 ±0.15
0.087 ±0.006 2.2 ±0.15
0.015
0.4
0.011 ±0.002 N/A
inch
IM SMT
J-Legs
0.393 ±0.003 10 ±0.08
0.236 ±0.003 6 ±0.08
0.222 -0.008 5.65 -0.2
N/A
N/A
0.295 ±0.011 2.8 ±0.2
0.200 ±0.004 5.08 ±0.1
0.126 ±0.006 3.2 ±0.15
0.087 ±0.006 2.2 ±0.15
0.015
0.4
N/A
N/A
THT Version
0.393 ±0.003
0.236 ±0.003
0.222 -0.008
N/A
0.110 ±0.007
0.200 ±0.004
0.126 ±0.006
0.087 ±0.006
0.015
N/A
SMT Version
Standard version
Narrow version
Gull Wings
Mounting hole layout
Solder pad layout
View onto the component side of the PCB
(top view)
Standard version
View onto the component side of the PCB
(top view)
Narrow version
Gull Wings
Ø min. 0.75
Terminal assignment
Relay Code
Relay - top view
Non-latching type,
not energized condition
J Legs
Latching type, 1 coil
reset condition
Page 3 (11)
108-98001 Rev. D
J Legs
IM Relay
Coil Data (values at 23°C)
Nominal
voltage
Unom
Vdc
Operate/set voltage range
Minimum
Maximum
voltage Umin
voltage Umax
Vdc
Vdc
Ordering Information
Release/
reset voltage
Minimum
Coil
power
Vdc
mW
Coil
Resistance
Relay
code
Tyco part
number
Ω / ± 10 %
THT Standard non-latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
3.6
7.2
10.8
12.1
14.5
21.7
28.9
48.5
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
145
178
257
574
1028
2880
IM00TS
IM01TS
IM02TS
IM03TS
IM04TS
IM05TS
IM06TS
IM07TS
3-1462037-5
0-1462037-4
1-1462037-3
1-1462037-8
4-1462037-1
2-1462037-2
2-1462037-7
3-1462037-0
3.6
7.2
10.8
12.1
14.5
21.7
28.9
48.5
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
145
178
257
574
1028
2880
IM00NS
IM01NS
IM02NS
IM03NS
IM04NS
IM05NS
IM06NS
IM07NS
1-1462038-0
1-1462038-1
1-1462038-2
1-1462038-3
1-1462038-4
1-1462038-5
1-1462038-6
1-1462038-7
3.6
7.2
10.8
12.1
14.5
21.7
28.9
48.5
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
145
178
257
574
1028
2880
IM00JR
IM01JR
IM02JR
IM03JR
IM04JR
IM05JR
IM06JR
IM07JR
3-1462037-9
4-1462037-0
1-1462037-1
1-1462037-6
4-1462037-4
4-1462037-5
4-1462037-6
4-1462037-8
0.15
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
200
16
64
145
178
257
574
1028
2880
IM00GR
IM01GR
IM02GR
IM03GR
IM04GR
IM05GR
IM06GR
IM07GR
3-1462037-7
0-1462037-1
0-1462037-9
1-1462037-4
4-1462037-2
3-1462037-4
2-1462037-3
4-1462037-7
0.30
0.45
0.50
0.90
1.20
2.40
140
140
140
140
140
200
64
145
178
574
1028
2880
IM01CGR
IM02CGR
IM03CGR
IM05CGR
IM06CGR
IM07CGR
0-1462038-4
0-1462038-1
0-1462038-2
0-1462038-3
9-1462037-9
0-1462039-2
0.45
0.50
140
140
145
178
IM02DGR
IM03DGR
9-1462038-8
9-1462038-9
THT Narrow non-latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
SMT J-Legs non-latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
SMT Gull Wings non-latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
3.6
7.2
10.8
12.1
14.5
21.7
28.9
48.5
High Dielectric Version
SMT Gull Wings non-latching 1 coil
3
4.5
5
9
12
24
2.25
3.38
3.75
6.75
9.00
18.00
7.2
10.8
12.1
21.7
28.9
48.5
High Current Version
SMT Gull Wings non-latching 1 coil
4.5
5
3.38
3.75
10.8
12.1
Further coil versions are available on request.
Page 4 (11)
108-98001 Rev. D
IM Relay
Coil Data (values at 23°C)
Nominal
voltage
Unom
Vdc
Operate/set voltage range
Minimum
Maximum
voltage Umin
voltage Umax
Vdc
Vdc
Ordering Information
Release/
reset voltage
Minimum
Coil
power
Vdc
mW
Coil
Resistance
Relay
code
Tyco part
number
Ω / ± 10 %
High Sensitive Version
SMT Gull Wings non-latching 1 coil
3
4.5
5
12
24
2.40
3.60
4.00
9.60
19.20
8.7
13.1
14.6
35.0
57.8
0.30
0.45
0.50
1.20
2.40
100
100
100
110
140
91
194
238
1315
4120
IM11GR
IM12GR
IM13GR
IM16GR
IM17GR
9-1462038-5
0-1462039-3
0-1462039-4
0-1462039-5
0-1462039-6
4.3
8.6
12.9
14.3
17.1
25.7
34.3
48.5
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
203
250
380
810
1440
2880
IM40TS
IM41TS
IM42TS
IM43TS
IM44TS
IM45TS
IM46TS
IM47TS
5-1462037-0
5-1462037-3
5-1462037-6
5-1462037-8
6-1462037-1
3-1462037-2
6-1462037-6
6-1462037-9
4.3
8.6
12.9
14.3
17.1
25.7
34.3
48.5
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
203
250
380
810
1440
2880
IM40NS
IM41NS
IM42NS
IM43NS
IM44NS
IM45NS
IM46NS
IM47NS
1-1462038-8
1-1462038-9
2-1462038-0
2-1462038-1
2-1462038-2
2-1462038-3
2-1462038-4
2-1462038-5
4.3
8.6
12.9
14.3
17.1
25.7
34.3
48.5
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
203
250
380
810
1440
2880
IM40JR
IM41JR
IM42JR
IM43JR
IM44JR
IM45JR
IM46JR
IM47JR
5-1462037-2
5-1462037-5
5-1462037-7
6-1462037-0
6-1462037-3
6-1462037-5
6-1462037-8
7-1462037-1
4.3
8.6
12.9
14.3
17.1
25.7
34.3
48.5
-1.13
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
100
200
23
90
203
250
380
810
1440
2880
IM40GR
IM41GR
IM42GR
IM43GR
IM44GR
IM45GR
IM46GR
IM47GR
5-1462037-1
5-1462037-4
3-1462037-1
5-1462037-9
6-1462037-2
6-1462037-4
6-1462037-7
7-1462037-0
14.3
-3.75
100
250
IM43CGR
9-1462038-7
THT Standard latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
THT Narrow latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
SMT J-Legs latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
SMT Gull Wings latching 1 coil
1.5
3
4.5
5
6
9
12
24
1.13
2.25
3.38
3.75
4.50
6.75
9.00
18.00
High Dielectric Version
SMT Gull Wings latching 1 coil
5
3.75
Page 5 (11)
108-98001 Rev. D
IM Relay
Coil operating range
3.4
3
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
2.8
2.6
2.4
2.2
2
1.8
1.6
Umax. at 0 A
1.4
1.2
1
Unom. nominal coil voltage
2.6
0.2
2.4
2.2
2
1.8
1.6
1.4
1.2
1
Unom. nominal coil voltage
0.8
Uop. min.
Urel. min.
0.6
Uop. min.
Urel. min.
0.4
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
2.8
0.8
0.6
140 mW
3.2
Coil Voltage [U/Unom]
3
Coil Voltage [U/Unom]
3.4
110 mW
200 mW
3.2
0.4
0.2
0
0
-60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90 100 110 120
-40 -30 -20 -10
Ambient Temperature [°C]
3.4
Umax. - 5 % coil duty at 2 x 2 A (100 mW)
3
2.8
Coil Voltage [U/Unom]
2.6
2.4
10 20 30
40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
200 mW Latching
100 mW Latching
3.2
0
Unom =
Nominal coil voltage
Umax. =
Upper limit of the operative range of
the coil voltage (limiting voltage) when coils are
continously energized
Uop. min. =
Lower limit of the operative range of
the coil voltage (reliable operate voltage)
Urel. min. =
Lower limit of the operative range of
the coil voltage (reliable release voltage)
Umax. - 100 % coil duty at 0 A (100 mW)
Umax. - 100 % coil duty at 0 A (200 mW)
2.2
2
1.8
1.6
1.4
Umax. - 5 % coil duty at 0 A (100 mW)
Umax. - 5 % coil duty at 0 A (200 mW)
1.2
1
Unom. nominal coil voltage
0.8
0.6
Uset min.
0.4
Umax. - 5 % coil duty at 2 x 1 A (100 mW)
0.2
0
-60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90 100 110 120 130 140
Ambient Temperature [°C]
DC Voltage [Vdc]
Max. DC load breaking capacity
DC current [A]
Page 6 (12)
108-98001 Rev. D
IM Relay
Contact Data
Number of contacts and type
Contact assembly
Contact material
Limiting continuous current at max. ambient temperature
Maximum switching current
Maximum swichting voltage
Maximum switching capacity
Thermoelectric potential
Minimum switching voltage
Initial contact resistance / measuring condition: 10 mA / 20 mV
Electrical endurance at contact application 0
(£ 30 mV / £ 10 mA)
cable load open end
Resistive load
at 125Vdc / 0.24 A - 30 W
at 220 Vdc / 0.27 A - 60 W
at 250 Vac / 0.25 A - 62.5 VA
at 30 Vdc / 1 A - 30 W
at 30 Vdc / 2 A - 60 W
2 changeover contacts
Bifurcated contacts
Palladium-ruthenium, gold-covered
2A
2A
220 Vdc
250 Vac
60 W, 62.5 VA
< 10 mV
100 mV
< 50 mW
min. 2.5 x 106 operations
min. 2.0 x 106 operations
min. 5 x 105 operations
min. 1 x 105 operations
min. 1 x 105 operations
min. 5 x 105 operations
min. 1 x 105 operations
Mechanical endurance
UL contact ratings
typ. 108 operations
220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Insulation
Standard Version
Insulation resistance at 500 VDC
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
High Dielectric Version
> 10 W
> 109 W
1800 Vrms
1000 Vrms
1000 Vrms
1800 Vrms
1800 Vrms
1500 Vrms
2500 V
1500 V
1500 V
2500 V
2500 V
2500 V
2500 V
1500 V
1500 V
2500 V
2500 V
2500 V
9
Surge voltage resistance
according to Bellcore TR-NWT-001089 (2 / 10 ms)
between coil and contacts
between adjacent contact sets
between open contacts
according to FCC 68 (10 / 160 ms)
between coil and contacts
between adjacent contact sets
between open contacts
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 2 pF
max. 2 pF
max. 1 pF
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
- 37.0 dB / - 18.8 dB
- 0.03 dB / - 0.33 dB
1.06 / 1.49
* High Dielectric Version „C“
Page 7 (12)
108-98001 Rev. D
IM Relay
General data
1 ms / 3 ms
1 ms /3 ms
1 ms / 3 ms
3 ms / 5 ms
1 ms / 5 ms
50 operations/s
-40° C ... +85° C
< 150 K/W
125° C
20 G
10 to 1000 Hz
50 G (function)
500 G (damage)
immersion cleanable, IP 67 / RT V
application time 20 s, no burning and glowing
any
Ultrasonic cleaning is not recommended
max. 0.75 g
NiPdAu
Operate time at Unom typ. / max.
Reset time (latching) at Unom , typ. / max.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
Shock resistance, half sinus, 11 ms
half sinus, 0.5 ms
Degree of protection / Environmental protection
Needle flame test
Mounting position
Processing information
Weight (mass)
Terminal surface
MSL 3
260° C / 10 s
Moisture sensitive level (JEDEC J-STD-020B)
Resistance to soldering heat
All data refers to 23° C unless otherwise specified.
Recommended soldering conditions
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Temperature °C
240° C
Full line:
typical
Dotted line: process limits
180° C
130° C
forced
cooling
100° C
Temperature °C
20 - 40 sec
Recommended reflow soldering profile
Time (s)
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
Vapor Phase Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Temperature °C
Resistance to soldering heat - Reflow profile
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
Page 8 (11)
108-98001 Rev. D
IM Relay
Packing
Dimensions in mm
Tube for THT version - 50 relays per tube, 1000 relays per box
Tape and reel for SMT version - 1’000 relays / reel, 1’000 or 5’000 relays / box
Reel dimension
Page 9 (11)
108-98001 Rev. D
IM Relay
IM Relays
4th generation slim line – low profile polarized 2 c/o telecom relay with
bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption
of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay
is available as through hole and surface mount type (J-Legs and Gull
Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is
CECC/IECQ approved and certified in accordance with IEC/EN 60950
and UL1950. Dimensions approx. 10 x 6 mm board space and
5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 24 V, coil power consumption 140 mW,
latching relays with 1 coil 70 mW. The P2 Relay is available as through
hole or surface mount type and capable to switch currents up to 5
A. Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FX Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW. The FX2 relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/
IECQ approved and certified in accordance with IEC/EN 60950 and
UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm
height.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as
through hole and surface mount type. Dielectric strength fulfills the
Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved
and certified in accordance with IEC/EN 60950 and UL1950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW
for the high sensitive version, 140... 300 mW for the standard version,
latching relays with 1 coil 100 mW.. The FP2 Relay is available as
through hole type and capable to switch loads up to
30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /
160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.
14 x 9 mm board space and 5 mm height.
MT2 / MT4
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and
signal relay with bifurcated contacts. Nominal voltage range from 4.5 ...
48 V, coil power consumption 150/200/300/400 and
550 mW, and 300 mW (MT4). Dielectric strength fulfills the
requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both
and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)
the MT4 only.
Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,
MT4 approx. 20 x15 mm board space and 11 mm height.
Page 10 (11)
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various
other applications. Nominal voltage range from 3 ... 48 V, coil power
consumption from 150 .... 500 mW. The D2n relay is capable to
switch currents up to 3 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
20 x10 mm board space and 11,5 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for
a wide range of applications, available as non latching or latching relay
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay
is available as through hole or surface mount type and capable to
switch currents up to 1 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for
SMT version.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW,
sensitive versions 200 mW. The W11 relay is capable to switch
currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.
15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal
voltage range from 5 ... 24 V, coil power consumption 50...280 mW
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays
are available in DIP or SIL housing and capable to switch currents up to
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm
height for SIL version.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various
signal switching applications. Available as non polarized, polarized
/ latching and relay with AC coil. The benefit is the possibility of
combining various contact sets from 1 up to 6 poles, single and
bifurcated contacts, different contact materials with a coil voltage
range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust
protected and hermetically sealed versions, with plug in or solder
terminals and are capable to switch currents up to 5 A. Forcibly
guided (linked) contact sets optional. Dielectric strength 500 Vrms.
Dimensions from approx. 19 x 24 to 19x35 mm board space and
30 mm height.
Other Relays
We offer a variety of different relay families for maintenance and
replacement purposes. These relays are up to 60 years old now, such
as Card Relay SN (V23030 / V23031 series), Small General Purpose
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067
and V23163 ... V23167 series). Accessories like sockets, hold down
springs, etc. optional.
HF3 Relay
High performance low cost RF relay with excellent RF characteristics.
Available with an impedance of 50 and 75 Ohm. Suitable for frequencies up to 3 GHz. Actually smallest RF relay available combining small
size, excellent RF performance and SMD solderability. Available as non
latching or latching relay with 1 or 2 coils and a nominal coil voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.
108-98001 Rev. D
Tyco Electronics AXICOM Ltd.
Seestrasse 295 - P.O. Box 220
CH-8804 Au-Wädenswil / Switzerland
Phone +41 1 782 9111
Fax +41 1 782 9080
E-mail: [email protected]
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: [email protected]
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: [email protected]
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
Page 11 (11)
108-98001 Rev. D
Similar pages