TE IMB07CGR Signal relay Datasheet

Signal Relays
AXICOM
IM - B Relay
n
n
n
n
n
n
n
Minimum board-space 60mm2
Slim line 10x6mm (0.39x0.24”) and low profile 5.65mm (0.222”)
Switching power 60W/62.5VA
Switching voltage 220VDC/250VAC
Switching current 2A
Bifurcated contacts
High mechanical shock resistance
IM_AB
Typical applications
Telecommunication, access and transmission equipment, optical network
terminals, modems, office and business equipment, consumer electronics,
measurement and Test equipment, industrial control, medical equipment
U
Approvals
UL 508 File No. E 111441
Technical data of approved types on request
AXICOMÊSignalÊRelays
Contact Data
108-98001 Rev. M
Mechanical endurance
IM Relay
110VDC, 0.3A, 33W
220VDC, 0.27A, 60W
125VAC, 0.5A, 62.5W
250VAC, 0.25A, 62.5W
108 operations
Contact arrangement
1 form A (1 NO)
Max. switching voltage
220VDC, 250VAC
Contact Data
Rated current
2A
Limiting continuous current
2A
IM-B
IM-C
IM-D
IM-E
Switching power
60W,IM-A
62.5VA
Number of contacts and type
1ÊPoleÊbreak
1ÊPoleÊmake
1ÊPoleÊÊ
2ÊPoleÊbreak
2ÊPoleÊmake
Contact material
PdRu
Coil
Data
changeover
Au covered
Magnetic system
monostable, bistable
Contact assembly
BifurcatedÊcontacts
Contact style
twin contacts
Coil voltage range
1.5 to 24VDC
Contact material
Palladium-ruthenium,Êgold-covered
Minimum switching
100µV
125°C
Limiting voltage
continuous current
2ÊA
2ÊA
4ÊA Max. coil temperature
2ÊA
2ÊA
at max. ambient temperature
Initial contact resistance
<100mΩ at 10mA/30mV
Thermal resistance
<150K/W
switching current
2ÊA
2ÊA
3ÊA
2ÊA
2ÊA
ThermoelectricMaximum
potential
<10µV
Maximum swichting voltage
220ÊVdc
Operate time
typ. 1ms, max. 3ms
Coil versions, standard version, monostable, 1 coil
250ÊVac
Release time Maximum switching capacity
Coil
Rated
Operate
Release
Coil
Rated coil
60ÊW,Ê62.5ÊVA
without diode
in
parallel
typ.
1ms,
max.
3ms
code
voltage
voltage
voltage
resistance
power
Thermoelectric potential
<Ê10ʵV
with diode in
parallel
typ. 3ms, max. 5ms
VDC
VDC
VDC
Ω±10%
mW
Minimum
switching voltage
100ʵV
Bounce time max.
typ. 1ms,
5ms
01
0.30
64
140
Initial contact resistance /
< 100 max.
mΩ
< 100 mΩ
NO < 100 mΩ
< 50 mΩ 3.0
< 50 mΩ 2.25
measuring condition: 10 mA / 20 mV
Electrical endurance
02
4.5
3.38
0.45
145
140
Electrical
Contact category 0
at contact application
0 CC0
03
5.0
3.75
0.50
178
140
endurance
(≤ 30 mV / ≥ 10 mA)
min.Ê2.5ÊxÊ106Êoperations
(≤ 30mV / ≤ 10mA)
06
12.0
9.00
1.20
1029
140
cable load open end min. 2.5x106 operations
min.Ê2.0ÊxÊ106Êoperations
All figures are given for coil without pre-energization, at ambient temperature +23°C
cable load open end
min. 2.0x106 operations
Resistive load
at 125 Vdc / 0.24 A - 30 W
5 Êoperations
min.Ê5ÊxÊ10
resistive, 125VDC / 0.24A
- 30W
5x105 operations
at 220
Vdc / 0.27 A - 60min.
W
min.Ê1ÊxÊ105Êoperations
at 250
Vac / 0.25 A - 62.5
resistive, 220 VDC / 0.27A
- 60W
min. 1x105 operations
Insulation
C*
min.Ê1ÊxÊ105Êoperations
VA
5
min.Ê5ÊxÊ105Êoperations
resistive, 250VAC / 0.25A
- 62.5VA
min. 1x10 operations
at 30 Vdc / 1 A - 30 W
min.Ê1ÊxÊ105Êoperations
5
resistive, 30VDC / 1A - 30W
at 30 Vdc / 2 A - 60 W min. 5x10 operations
Mechanical
endurance
typ.Ê108Êoperations
resistive, 30VDC
/ 2A
- 60W
min. 1x105 operations
Coil operating range
UL contact ratings
Contact data (continued)
UL contact rating
30VDC, 2A, 60W, NO only
220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
high
Max. DC Load Breaking Capacity
Max. DC load breaking capacity
DC Voltage [Vdc]
resistive load
DC current [A]
All specifications subject to change. Consult Tyco Electronics for latest specifications.
01-2016, Rev. 0116
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
21 of 28
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
Signal Relays
AXICOM
Assignment
IM - B RelayTerminal
(Continued)
Relay – top view
Non-Latching Type
Latching Type, 1 Coil
dielectric version
Terminal assignment
not energized condition
Initial dielectric strength
TOP view on relay
between open contacts
2500Vrms
between contact and coil
3500Vrms
IM-B, 1 form A (NO)
Initial surge withstand voltage
between open contacts
3500V
between
contact and coil
4900V
Terminal
Assignment
Initial insulation resistance
Relay
– topinsulated
view
between
elements
>109Ω
Capacitance
Non-Latching Type
Latching Type, 1 Coil
between open contacts
max. 1pF
notbetween
energized
condition
reset condition
contact
and coil
max. 2pF
between adjacent contacts
max. 2pF
reset condition
Contacts are shown in reset
condition. Contact position might
change during transportation and
must be reset before use.
*this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength
enhancement, SF6 is hermetically sealed in relay without leaks to air during normal application as recommended per the applicable product specification. It is clarified that the usage
of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local
sales or field engineer for further information and detailed material declaration.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
RF Data
Isolation at 100MHz/900MHz
Insertion loss at 100MHz/900MHz
Voltage standing wave ratio (VSWR)
at 100MHz/900MHz
37.0dB/18.8dB
0.03dB/0.33dB
1.06/1.49
Dimensions
Other Data
0.4
5.4±0.15
3.2
3.2
0.4
5.4±0.15
5.08±0.1
H
T
T1
T2
D1
D2
Tw
S
5.65ÊÐÊ0.20
3.2
N/A
5.08ʱÊ0.10
3.20ʱÊ0.15
5.08±0.1
2.20ʱÊ0.15
0.40
0.75
H
T
T1
T2
D1
D2
Tw
S
5.65ÊÐÊ0.20
0.222ÊÐÊ0.008
3.2
0.125
N/A
N/A
5.08ʱÊ0.10
0.200ʱÊ0.004
3.20ʱÊ0.15
0.126ʱÊ0.006
2.20ʱÊ0.15
0.087ʱÊ0.006
0.40
0.015
0.75
0.029
Holelayout
Layout
Mounting HoleMounting
LayoutPCB
0.222ÊÐÊ0.008
ÊÊ5.65ÊÐÊ0.20
0.125
N/A
N/A
7.50ʱÊ0.30
0.200ʱÊ0.004
5.08ʱÊ0.10
0.126ʱÊ0.006
3.20ʱÊ0.15
0.087ʱÊ0.006
2.20ʱÊ0.15
0.015
0.4
0.029
N/A
ÊÊ5.65ÊÐÊ0.20
0.222ÊÐÊ0.008
N/A
7.50ʱÊ0.30
0.295ʱÊ0.011
5.08ʱÊ0.10
0.200ʱÊ0.004
3.20ʱÊ0.15
0.126ʱÊ0.006
2.20ʱÊ0.15
0.087ʱÊ0.006
0.4
0.015
N/A
0.222ÊÐÊ0.008
N/A
0.295ʱÊ0.011
0.4
0.200ʱÊ0.004
5.4±0.15
0.126ʱÊ0.006
Coplanarity ≤0.1mm
0.087ʱÊ0.006
0.015
N/A
0.4
5.08±0.1
5.65-0.2
0.75
5.65-0.2
0.75
5.65-0.2
All specifications
subjectEU
to change.
Consult
TycoRoHS,
Electronics
for latest
specifications.
Material
compliance:
RoHS/ELV,
China
REACH,
Halogen
content
THT version
Standard version 12 of 28
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-40°C to +85°C
Thermal resistance < 150K/W
Category of environmental protection
IEC 61810 RT V - hermetically sealed
Degree of protection
IEC 60529 IP 67, immersion cleanable
Vibration resistance (functional)
20g, 10 to 500Hz
108-98001 R
108-98001 Rev. M
AXICOMÊSignalÊRelays
AXICOMÊSignalÊRelays
Shock resistance (functional), half sinus 11ms
50g
Shock resistance (destructive), half sinus 0.5ms
500g
IM-A
Relay
1 Pole
/ 1/ Form
/ SPST NC
IM-A Relay
1 Pole
Break
/ 1 Break
Form B
SPST B
NC
Weight
max. 0.75g
Resistance to soldering heat THT
SMT version
Gull wings
IM-A
Dimensions in mm
DimensionsDimensions
IM-A
Dimensions in mm
IEC 60068-2-20
265°C/10s
Resistance to soldering heat SMT
IEC 60068-2-58
265°C/10s THT VersionTHT Version
SMT VersionSMT Version
Moisture sensitive level, JEDEC J-Std-020D
MSL3
Standard
Version
Standard
Version
Ultrasonic cleaning
not recommended
IMÊTHT
IMÊSMT
IMÊTHT
IMÊSMT
Packaging/unit
Standard
GullÊWings
Standard
GullÊWings
mm
inch
mm
inch
mm
inch
mm
inch
THT version
tube/50pcs., box/1000 pcs.
10.0±0.08
10.0±0.08
6.0±0.08
6.0±0.0
10.0±0.08
10.0±0.08
6.0±0.08
6.0±0.08
10.00ʱÊ0.08
0.393ʱÊ0.003
10.00ʱÊ0.08
0.393ʱÊ0.003
L
10.00ʱÊ0.08 L
0.393ʱÊ0.003
10.00ʱÊ0.08
0.393ʱÊ0.003
SMT version
reel/1000 pcs., box/1000 or 5000 pcs.
6.00ʱÊ0.08
0.236ʱÊ0.003
ÊÊ6.00ʱÊ0.08
0.236ʱÊ0.003
W
6.00ʱÊ0.08 W
0.236ʱÊ0.003
ÊÊ6.00ʱÊ0.08
0.236ʱÊ0.003
5.4±0.15
7.5±0.3
Coplanarity ≤0.1mm
5.08±0.
7.5±0.
Coplanarity ≤ 0.1mm
Coplanarity ≤ 0.1mm
Solder Pad Layout
Solder Pad Layout
TOP view on component side of PCB
View onto the
component
the PCB (top view)
View onto the
component
the PCB (top view
View onto the component
side
of the PCBside
(topofview)
View onto the component
side
of the PCBside
(topofview)
THT mounting holes
2
01-2016, Rev. 0116
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
SMT - solder pads
Terminal
Assignment
Terminal Assignment
Datasheets and product specification
Datasheets
and product data is subject to the
Datasheets, product data, ‘Definitions’ secRelay –terms
top view
according to IEC 61810-1 andRelay
to be– used
of the disclaimer and all chapters of
tion, application notes and all specifications
top view
only together with the ‘Definitions’ section. Non-Latching
the ‘Definitions’
are subject to change.
Type section, available at
Non-Latching Type
Latching Type,Latching
1 Coil Type, 1 Coil
http://relays.te.com/definitions
not energized condition
not energized condition
reset conditionreset condition
Dottedline: processlimits
Temperature °C
Temperature °C
240°C
180°C
Packing
130°C
180°C
100°C
130°C
Dimensions in
forced
cooling
forced
Signal
Relays
AXICOM
cooling
100°C
AXICOMÊSignalÊRelays
Vapor Phase Soldering: Temperature/Time
Profile
IM - B Relay (Continued) (Lead and Housing Peak AXICOMÊSignalÊRelays
Temperature)
IM Relay
Time (s)
IM Relay
Vapor Phase Soldering: Temperature/Time
Profile
(Lead and Housing Peak Temperature)
Processing Recommended soldering
Time (s) conditions
Packing
Packing
Packing
Recommended Reflow Soldering Profile
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020D
Tube for THT version
50 relays per tube, 1000 relays per box
Recommended Reflow Soldering Profile
Temperature °C
Temperature °C
Tube for THT version
50 relays per tube
1,000 relays per box
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
Time (s)
Resistance to Soldering Heat - Reflow Infrared
Profile
Soldering: temperature/
Resistance to soldering heat - Reflow profile
time profile (lead and housing
peak temperature)
1,00
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Tape and reel for SMT version
1000 relays per reel, 1000 or 5000 relays per box
Tape and reel for SMT version
1,000 relays per reel
1,000 or 5,000 relays per box
Resistance to Soldering Heat - Reflow Profile
Temperature °C
Temperature °C
Tube fo
Tub
50 relay
50re
r
1,000
Reel Dimension
Tape an
1,000 re
Tap
1,000
o
Infrared Soldering: Temperature/Time Profile
Reel Dimension
(Lead and Housing Peak Temperature)
Infrared
Soldering: Temperature/Time Profile
Reel
dimensions
(Lead and Housing Peak Temperature)
Time (s)
Time
(s)
Recommended reflow soldering
profile
1,00
1,00
Reel Dimension
Reel Dimension
All specifications subject to change. Consult Tyco Electronics for latest specifications.
25 of 28
All specifications subject to change. Consult Tyco Electronics for latest specifications.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
25 of 28
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Vapor Phase Soldering:
temperature/time profile (lead
and housing peak temperature)
All specifications subject to change. Consult Tyco Electronics for latest specifications.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
01-2016, Rev. 0116
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
3
Signal Relays
AXICOM
IM - B Relay (Continued)
Product code structure
IM
Typical product code
B
03
G
R
Type
IM
Signal Relays IM Series IMA/IMB
Contact arrangement
B 1 form A, 1 NO
Coil
Coil code: please refer to coil versions table
Performance type
Blank Standard version
Terminals
T THT - standard
Packing
S Tube
Product code
IMB01CGR
IMB01CTS
IMB02CGR
IMB02CTS
IMB03CGR
IMB03CTS
IMB04CGR
IMB06CGR
IMB06CTS
IMB07CGR
IMB07CTS
IMB42CGR
IMB42CTS
4
Arrangement
1 form A,
1 NO
contact
C
High Dielectric Version
G
SMT-gull wing
R
Reel
Perf. type
High dielectric
Coil
3VDC
Coil type
Monostable
4.5VDC
5VDC
6VDC
12VDC
24VDC
4.5VDC
Bistable
Terminals
SMT gull wing
THT standard
SMT gull wing
THT standard
SMT gull wing
THT standard
SMT gull wing
THT standard
SMT gull wing
THT standard
SMT gull wing
THT standard
Part number
1462041-1
1462041-4
1462041-2
1462041-5
1462041-7
1462041-8
1462041-9
1462041-3
1462041-6
1-1462041-3
1-1462041-4
1-1462041-6
1-1462041-5
01-2016, Rev. 0116
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
Similar pages