IK Semicon IN7406 Hex inverter buffers/drivers with open-collector high-voltage output Datasheet

TECHNICAL DATA
Hex Inverter Buffers/Drivers with Open-Collector IN7406
High-Voltage Outputs
The IN7406 monolithic TTL hex inverter buffers/drivers feature
high-voltage open collector outputs for interfacing with high-level
circuits (such as MOS) or for driving high-current loads (such as lamps
or relays), and are also characterized for use as inverter buffers for
driving TTL inputs.
•
•
•
•
•
Minimum breakdown Voltages is 30 V
Maximum sink Current is 40 mА
Converts TTL Voltage Levels to MOS Levels
Open-Collector Driver for Indicator Lamps and Relays
Inputs Fully Compatible with MOST TTL Circuits.
ORDERING INFORMATION
IN7406N Plastic
IN7406D
SOIC
TA = -10° to 70° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs
Output
A
Y
L
Z
H
L
Z = High Impedance
Y=Ā
PIN 14 =VCC
PIN 7 = GND
1
IN7406
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
VCC
Supply Voltage
7.0
V
VIN
Input Voltage
5.5
V
VOUT
Output Voltage
30
V
Tstg
Storage Temperature Range
-65 to +150
°C
*
Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max
Unit
5.25
V
VCC
Supply Voltage
4.75
VIH
High Level Input Voltage
2.0
VIL
Low Level Input Voltage
0.8
V
UOH
High Level Output Voltage
30
V
IOL
Low Level Output Current
40
mA
TA
Ambient Temperature Range
+70
°C
-10
V
DC ELECTRICAL CHARACTERISTICS
Guaranteed Limit
Symbol
Parameter
Test Conditions
Min
Max
Unit
VIK
Input Clamp Voltage
VCC = 4.75V, IIN = -12 mA
-1.5
V
IOH
High Level Output Current
VCC = 4.75V, VOH =30V
0.25
mA
VOL
Low Level Output Voltage
VCC = 4.75V, IOL = 16 mA
0.4
V
VCC = 4.75V, IOL = 40 mA
0.7
IIH
High Level Input Current
VCC = 5.25V, VIN = 2.4 V
0.04
mA
IIL
Low Level Input Current
VCC = 5.25V, VIN = 0.4 V
-1.6
mA
ICC
Supply Current
VCC = 5.25V
Outputs High
48
mA
Outputs Low
51
2
IN7406
AC ELECTRICAL CHARACTERISTICS (T = 25°C, VCC = 5.0 V, CL = 15 pF,
RL = 110 Ω, Input tr = tf = 10 ns)
Symbol
Parameter
tPLH
tPHL
Min
Max
Unit
Propagation Delay Time, Low to High Level Output (from
Input to Output)
18
ns
Propagation Delay Time, High to Low Level Output (from
Input to Output)
28
ns
Figure 1. Switching Waveforms
* Includes all probe and jig capacitance
Figure 2. Test Circuit
3
IN7406
N SUFFIX PLASTIC DIP
(MS - 001AA)
A
Dimension, mm
8
14
B
7
1
Symbol
MIN
MAX
A
18.67
19.69
B
6.1
7.11
5.33
C
F
L
C
-T- SEATING
PLANE
N
G
M
K
J
H
D
0.25 (0.010) M T
NOTES:
1. Dimensions “A”, “B” do not include mold flash or protrusions.
Maximum mold flash or protrusions 0.25 mm (0.010) per side.
D
0.36
0.56
F
1.14
1.78
G
2.54
H
7.62
J
0°
10°
K
2.92
3.81
L
7.62
8.26
M
0.2
0.36
N
0.38
D SUFFIX SOIC
(MS - 012AB)
Dimension, mm
A
14
8
H
B
1
G
P
7
R x 45
C
-TK
D
SEATING
PLANE
M
Symbol
MIN
MAX
A
8.55
8.75
B
3.8
4
C
1.35
1.75
D
0.33
0.51
F
0.4
1.27
G
1.27
H
5.27
J
0°
8°
K
0.1
0.25
1. Dimensions A and B do not include mold flash or protrusion.
M
0.19
0.25
2. Maximum mold flash or protrusion 0.15 mm (0.006) per side
for A; for B ‑ 0.25 mm (0.010) per side.
P
5.8
6.2
R
0.25
0.5
J
0.25 (0.010) M T C M
NOTES:
F
4
Similar pages