IRF IRHQ567110P Radiation hardened 100v, combination 2n-2p-channel power mosfet surface mount (lcc-28) Datasheet

PD - 94057B
IRHQ567110
RADIATION HARDENED 100V, Combination 2N-2P-CHANNEL
RAD-Hard HEXFET
POWER MOSFET
SURFACE MOUNT (LCC-28)
4# TECHNOLOGY
®
™
Product Summary
Part Number Radiation Level RDS(on)
IRHQ567110 100K Rads (Si) 0.27Ω
IRHQ563110 300K Rads (Si) 0.29Ω
IRHQ567110 100K Rads (Si)
0.96Ω
IRHQ563110 300K Rads (Si)
0.98Ω
ID
4.6A
4.6A
-2.8A
-2.8A
CHANNEL
N
N
P
P
International Rectifier’s RAD-HardTM HEXFET® MOSFET
Technology provides high performance power MOSFETs
for space applications. This technology has over a decade
of proven performance and reliability in satellite applications. These devices have been characterized for both
Total Dose and Single Event Effects (SEE). The combination of low RDS(on) and low gate charge reduces the power
losses in switching applications such as DC to DC converters and motor control. These devices retain all of the
well established advantages of MOSFETs such as voltage
control, fast switching, ease of paralleling and temperature stability of electrical parameters.
LCC-28
Features:
n
n
n
n
n
n
n
n
n
n
Single Event Effect (SEE) Hardened
Low RDS(on)
Low Total Gate Charge
Proton Tolerant
Simple Drive Requirements
Ease of Paralleling
Hermetically Sealed
Ceramic Package
Surface Mount
Light Weight
Absolute Maximum Ratings ( Per Die)
Parameter
ID @ VGS = ±12V, TC = 25°C
ID @ VGS = ±12V, TC = 100°C
IDM
PD @ TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
T STG
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current ➀
Max. Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy
Avalanche Current ➀
Repetitive Avalanche Energy ➀
Peak Diode Recovery dv/dt
Operating Junction
Storage Temperature Range
Pckg. Mounting Surface Temp.
Weight
Pre-Irradiation
N-Channel
P-Channel
4.6
2.9
18.4
12
0.1
±20
47 ➁
4.6
1.2
6.1 ➂
Units
-2.8
-1.8
-11.2
12
W
0.1
W/°C
±20
70 ⑦
-2.8
1.2
7.1 ⑧
A
V
mJ
A
mJ
V/ns
-55 to 150
o
300 (for 5s)
0.89 (Typical)
C
g
For footnotes refer to the last page
www.irf.com
1
07/25/01
IRHQ567110
Pre-Irradiation
Electrical Characteristics For Each N-Channel Device @ Tj = 25°C (Unless Otherwise Specified)
Min
Typ Max Units
100
—
—
V
—
0.13
—
V/°C
—
—
2.0
3.3
—
—
—
—
—
—
—
—
0.31
0.27
4.0
—
10
25
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.1
100
-100
13
4.0
3.9
20
24
32
90
—
C iss
C oss
C rss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
—
—
—
371
108
3.0
—
—
—
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
VGS = 12V, ID = 4.6A ➃
VGS = 12V, ID = 2.9A
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 2.9A ➃
VDS= 80V, VGS=0V
VDS = 80V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS = 12V, ID = 4.6A
VDS = 50V
Ω
V
S( )
Ω
Parameter
BVDSS
Drain-to-Source Breakdown Voltage
∆BV DSS/∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
VGS(th)
Gate Threshold Voltage
g fs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
µA
nA
nC
VDD = 50V, ID = 4.6A,
VGS = 12V, RG = 7.5Ω
ns
nH
Measured from the center of
drain pad to center of source pad
VGS = 0V, VDS = 25V
f = 1.0MHz
pF
Source-Drain Diode Ratings and Characteristics (Per Die)
Parameter
Min Typ Max Units
IS
ISM
VSD
t rr
Q RR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) ➀
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
ton
Forward Turn-On Time
—
—
—
—
—
—
—
—
—
—
4.6
18.4
1.2
173
863
Test Conditions
A
V
nS
nC
Tj = 25°C, IS = 4.6A, VGS = 0V ➃
Tj = 25°C, IF = 4.6A, di/dt ≤ 100A/µs
VDD ≤ 50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance (Per Die)
Parameter
R thJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max Units
—
—
—
—
11.8
60
°C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com
Pre-Irradiation
IRHQ567110
Electrical Characteristics For Each P-Channel Device @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
Drain-to-Source Breakdown Voltage
-100
—
—
V
—
-0.13
—
V/°C
—
—
-2.0
1.9
—
—
—
—
—
—
—
—
1.2
0.96
-4.0
—
-10
-25
Ω
∆BV DSS /∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
VGS(th)
Gate Threshold Voltage
g fs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
Typ Max Units
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.1
-100
100
11
3.0
4.2
20
24
32
90
—
C iss
C oss
C rss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
—
—
—
377
102
7.0
—
—
—
V
S( )
Ω
BVDSS
µA
nA
nC
Test Conditions
VGS = 0V, ID = -1.0mA
Reference to 25°C, ID = -1.0mA
VGS = -12V, ID = -2.8A ➃
VGS = -12V, ID = -1.8A
VDS = VGS, ID = -1.0mA
VDS > -15V, IDS = -1.8A ➃
VDS= -80V, VGS=0V
VDS = -80V,
VGS = 0V, TJ = 125°C
VGS = -20V
VGS = 20V
VGS = -12V, ID = -2.8A
VDS = -50V
VDD = -50V, ID = -2.8A,
VGS = -12V, RG = 7.5Ω
ns
nH
Measured from the center of
drain pad to center of source pad
pF
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics (Per Die)
Parameter
Min Typ Max Units
IS
ISM
VSD
t rr
Q RR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) ➀
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
ton
Forward Turn-On Time
—
—
—
—
—
—
—
—
—
—
-2.8
-11.2
-5.0
138
555
Test Conditions
A
V
nS
nC
Tj = 25°C, IS = -2.8A, VGS = 0V ➃
Tj = 25°C, IF = -2.8A, di/dt ≤ -100A/µs
VDD ≤ -50V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance (Per Die)
Parameter
R thJC
RthJA
Junction-to-Case
Junction-to-Ambient
Min Typ Max Units
—
—
—
—
11.8
60
°C/W
Test Conditions
Typical socket mount
For footnotes refer to the last page
www.irf.com
3
IRHQ567110
Pre-Irradiation
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics For Each N-Channel Device @ Tj = 25°C, Post Total Dose Irradiation ➄➅
Parameter
BVDSS
VGS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
100K Rads(Si)1
Min Max
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source ➃
On-State Resistance (TO-39)
Static Drain-to-Source ➃
On-State Resistance (LCC-28)
Diode Forward Voltage ➃
300K Rads (Si)2 Units
Min
Max
100
2.0
—
—
—
—
—
4.0
100
-100
10
0.226
100
2.0
—
—
—
—
—
4.0
100
-100
10
0.246
—
0.27
—
—
1.2
—
Test Conditions
µA
Ω
VGS = 0V, ID = 1.0mA
VGS = VDS, ID = 1.0mA
VGS = 20V
VGS = -20 V
VDS= 80V, VGS =0V
VGS = 12V, ID = 2.9A
0.29
Ω
VGS = 12V, ID = 2.9A
1.2
V
VGS = 0V, IS = 4.6A
V
nA
1. Part number IRHQ567110
2. Part number IRHQ563110
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area (Per Die)
Ion
Energy
(MeV)
309
341
350
VDS
Br
I
Au
LET
MeV/(mg/cm2))
36.7
59.8
82.3
VDS (V)
Range
(µm) @VGS=0V @VGS=-5V @VGS= -8V @VGS=-10V @VGS=-15V
39.5
100
100
100
100
100
32.5
100
100
100
100
35
28.4
100
100
100
80
25
120
100
80
60
40
20
0
@VGS=-20V
100
25
—
Br
I
Au
0
-5
-10
-15
-20
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
4
www.irf.com
Pre-Irradiation
IRHQ567110
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics For Each P-Channel Device @ Tj = 25°C, Post Total Dose Irradiation ➄➅
Parameter
BVDSS
V GS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
100K Rads(Si)1
Min
Max
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source ➃
On-State Resistance (TO-39)
Static Drain-to-Source ➃
On-State Resistance (LCC-28)
Diode Forward Voltage ➃
300K Rads (Si)2
Min
Max
Units
Test Conditions
-100
- 2.0
—
—
—
—
—
-4.0
-100
100
-10
0.916
-100
- 2.0
—
—
—
—
—
-4.0
-100
100
-10
0.936
µA
Ω
VGS = 0V, ID = -1.0mA
VGS = VDS, ID = -1.0mA
VGS = -20V
VGS = 20 V
VDS= -80V, VGS =0V
VGS = -12V, ID = -1.8A
—
0.96
—
0.98
Ω
VGS = -12V, ID = -1.8A
—
-5.0
—
-5.0
V
nA
V
VGS = 0V, IS = -2.8A
1. Part number IRHQ567110
2. Part number IRHQ563110
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area (Per Die)
Ion
VDS (V)
Range
(µm) @VGS=0V @VGS=5V @VGS=10V @VGS=15V @VGS=17.5V @VGS=20V
-100
36.8
-100
-100
-100
-100
-100
32.7
-100
-100
-100
-100
-75
-25
28.5
-100
-100
-100
-30
—
—
Energy
(MeV)
285
344
351
VDS
Br
I
Au
LET
MeV/(mg/cm2))
37.3
59.9
82.3
-120
-100
-80
-60
-40
-20
0
Br
I
Au
0
5
10
15
20
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
5
IRHQ567110
Pre-Irradiation
N-Channel
Q1,Q4
100
100
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
10
1
5.0V
20µs PULSE WIDTH
T = 25 C
1
10
5.0V
1
10
2.5
10
TJ = 25 ° C
1
V DS = 25V
20µs PULSE WIDTH
9.0
10.0
VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
6
R DS(on) , Drain-to-Source On Resistance
(Normalized)
I D , Drain-to-Source Current (A)
TJ = 150 ° C
8.0
10
100
Fig 2. Typical Output Characteristics
100
7.0
1
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
6.0
°
J
0.1
0.1
100
VDS , Drain-to-Source Voltage (V)
0.1
5.0
20µs PULSE WIDTH
T = 150 C
°
J
0.1
0.1
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
TOP
TOP
ID = 4.6A
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 12V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature( ° C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
IRHQ567110
N-Channel
Q1,Q4
VGS =
Ciss =
Crss =
Coss =
600
20
0V,
f = 1MHz
Cgs + Cgd , Cds SHORTED
Cgd
Cds + Cgd
VGS , Gate-to-Source Voltage (V)
C, Capacitance (pF)
800
Ciss
400
Coss
200
Crss
10
VDS = 80V
VDS = 50V
VDS = 20V
12
8
4
FOR TEST CIRCUIT
SEE FIGURE 13
0
100
0
VDS , Drain-to-Source Voltage (V)
4
8
12
16
Q G , Total Gate Charge (nC)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
100
100
ID, Drain-to-Source Current (A)
ISD , Reverse Drain Current (A)
16
0
1
ID = 4.6A
10
TJ = 150 ° C
TJ = 25 ° C
1
V GS = 0 V
0.1
0.4
0.6
0.8
1.0
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
1.2
OPERATION IN THIS AREA
LIMITED BY R DS(on)
10
1ms
1
Tc = 25°C
Tj = 150°C
Single Pulse
10ms
0.1
1
10
100
1000
VDS , Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
7
IRHQ567110
Pre-Irradiation
N-Channel
Q1,Q4
5.0
RD
V DS
VGS
I D , Drain Current (A)
4.0
D.U.T.
RG
+
-V DD
VGS
3.0
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
2.0
Fig 10a. Switching Time Test Circuit
VDS
1.0
90%
0.0
25
50
75
100
125
150
TC , Case Temperature ( ° C)
10%
VGS
td(on)
Fig 9. Maximum Drain Current Vs.
Case Temperature
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJA )
100
D = 0.50
0.20
10
0.10
0.05
P DM
0.02
1
t1
0.01
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJA + TA
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
8
www.irf.com
Pre-Irradiation
IRHQ567110
N-Channel
Q1,Q4
15V
D R IV E R
L
VDS
D .U .T.
RG
IA S
VGS
20V
tp
+
V
- DD
0 .01 Ω
Fig 12a. Unclamped Inductive Test Circuit
A
EAS , Single Pulse Avalanche Energy (mJ)
100
TOP
80
BOTTOM
60
40
20
0
25
V (B R )D S S
ID
2.1A
2.9A
4.6A
50
75
100
125
150
Starting TJ , Junction Temperature( ° C)
tp
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
IAS
Current Regulator
Same Type as D.U.T.
Fig 12b. Unclamped Inductive Waveforms
50KΩ
QG
12V
.2µF
.3µF
12 V
QGS
QGD
+
V
- DS
VGS
VG
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
D.U.T.
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
9
IRHQ567110
Pre-Irradiation
P-Channel
Q2,Q3
100
100
VGS
-15V
-12V
-10V
-9.0V
-8.0V
-7.0V
-6.0V
BOTTOM -5.0V
-I D , Drain-to-Source Current (A)
-I D , Drain-to-Source Current (A)
10
-5.0V
1
20µs PULSE WIDTH
T = 25 C
°
J
0.1
0.1
1
10
100
-5.0V
1
20µs PULSE WIDTH
T = 150 C
°
J
1
10
100
-VDS , Drain-to-Source Voltage (V)
-VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
2.5
TJ = 25 ° C
10
TJ = 150 ° C
1
5.0
V DS = -50V
20µs PULSE WIDTH
6.0
7.0
8.0
9.0
10.0
-VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
R DS(on) , Drain-to-Source On Resistance
(Normalized)
-I D , Drain-to-Source Current (A)
10
0.1
0.1
100
10
VGS
-15V
-12V
-10V
-9.0V
-8.0V
-7.0V
-6.0V
BOTTOM -5.0V
TOP
TOP
ID = -2.8A
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = -12V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
IRHQ567110
P-Channel
Q2,Q3
VGS
Ciss
Crss
Coss
C, Capacitance (pF)
500
=
=
=
=
0V,
f = 1MHz
Cgs + Cgd , Cds SHORTED
Cgd
Cds + Cgd
C iss
400
300
Coss
200
100
20
-VGS , Gate-to-Source Voltage (V)
600
12
8
4
FOR TEST CIRCUIT
SEE FIGURE 13
0
0
10
0
100
2
4
6
8
10
12
Q G , Total Gate Charge (nC)
-VDS , Drain-to-Source Voltage (V)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
100
100
-I D, Drain-to-Source Current (A)
-ISD , Reverse Drain Current (A)
VDS = -80V
VDS = -50V
VDS = -20V
16
C
rss
1
ID = -2.8A
10
TJ = 150 ° C
TJ = 25 ° C
1
V GS = 0 V
0.1
1.0
2.0
3.0
4.0
5.0
-VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
6.0
OPERATION IN THIS AREA
LIMITED BY R DS(on)
10
1ms
1
10ms
Tc = 25°C
Tj = 150°C
Single Pulse
0.1
1
10
100
1000
-VDS , Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
11
IRHQ567110
Pre-Irradiation
P-Channel
Q2,Q3
3.0
VGS
2.5
-ID , Drain Current (A)
RD
V DS
D.U.T.
RG
+
2.0
V DD
VGS
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
1.5
1.0
Fig 10a. Switching Time Test Circuit
0.5
td(on)
tr
t d(off)
tf
VGS
10%
0.0
25
50
75
100
125
150
TC , Case Temperature ( ° C)
90%
VDS
Fig 9. Maximum Drain Current Vs.
Case Temperature
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJA )
100
D = 0.50
0.20
10
0.10
0.05
P DM
0.02
1
t1
0.01
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJA + TA
SINGLE PULSE
(THERMAL RESPONSE)
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
12
www.irf.com
Pre-Irradiation
IRHQ567110
P-Channel
Q2,Q3
L
VDS
D .U .T.
RG
IA S
VGS
-20V
tp
VD D
A
D R IV E R
0.0 1Ω
15V
Fig 12a. Unclamped Inductive Test Circuit
EAS , Single Pulse Avalanche Energy (mJ)
150
ID
-1.3A
-1.8A
BOTTOM -2.8A
TOP
120
90
60
30
0
25
IAS
50
75
100
125
150
Starting TJ , Junction Temperature ( ° C)
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
tp
V (BR)DSS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator
Same Type as D.U.T.
50KΩ
QG
-12V
12V
.2µF
.3µF
-12V
QGS
QGD
D.U.T.
+VDS
VGS
VG
-3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
13
IRHQ567110
Pre-Irradiation
Footnotes:
➀ Repetitive Rating; Pulse width limited by
➄ Total Dose Irradiation with VGS Bias.
maximum junction temperature.
➁ VDD = 25V, starting TJ = 25°C, L= 4.4mH,
Peak IL = 4.6A, VGS =12V
➂ ISD ≤ 4.6A, di/dt ≤ 300A/µs,
VDD ≤ 100V, TJ ≤ 150°C
➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2%
12 volt VGS applied and VDS = 0 during
irradiation per MIL-STD-750, method 1019, condition A
➅ Total Dose Irradiation with VDS Bias.
80 volt VDS applied and VGS = 0 during
irradiation per MlL-STD-750, method 1019, condition A
⑦ VDD = - 25V, starting TJ = 25°C, L=17.8mH,
Peak IL = - 2.8A, VGS = -12V
⑧ ISD ≤ - 2.8A, di/dt ≤ - 263A/µs,
VDD ≤ -100V, TJ ≤ 150°C
Case Outline and Dimensions — LCC-28
Q2
Q1
Q3
Q4
Q3
Q4
Q2
Q1
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 07/01
14
www.irf.com
Similar pages