Everlight IRM-8608S-1 Infrared remote-control receiver module Datasheet

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Infrared Remote-control Receiver Module
IRM-8608S-1
Features
‧High protection ability against EMI .
‧Oval lens to improve the receive angles.
‧Line-up for various center carrier frequencies.
‧Low voltage and low power consumption.
‧High immunity against ambient light.
‧Photodiode with integrated circuit.
‧TTL and CMOS compatibility.
‧Long reception distance.
‧High sensitivity.
Descriptions
The device is a miniature type infrared remote control
system receiver which has been developed and designed by
utilizing the most updated IC technology. The PIN diode
and preamplifier are assembled on lead frame, the epoxy
package is designed as an IR filter. The demodulated
output signal can directly be decoded by a microprocessor.
Applications
1. Optical switch
2. Light detecting portion of remote control
․AV instruments such as Audio, TV, VCR, CD, MD, etc.
․Home appliances such as Air-conditioner, Fan , etc.
․The other equipments with wireless remote control.
․CATV set top boxes
․Multi-media Equipment
Device Selection Guide
PART
MATERIAL
COLOR
Chip
Silicon
------
Metal can
Tinplate
Silver-white
Package
Epoxy
Black
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 1 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Package Dimensions
3.8
6.8
3.5
3.8
4.5
14.9
1.2
5.5
0.5
1
2
2.54
2.54
5.4
4.4
9.2
2.9
R2
.2
0.4
3
1.0
R2
.8
1 OUTPUT
2 GND
3 Vcc
1.3
3.4
Notes: 1.All dimensions are in millimeters.
2.Tolerances unless dimensions ±0.3mm.
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Supply Voltage
Vcc
0~6
V
Operating Temperature
Topr
-25 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +85
℃
Soldering Temperature
Tsol
260
℃
Notice
4mm from mold body
less than 10 seconds
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 2 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Recommended Operating Condition
Supply Voltage Rating: Vcc 4.5V to 5.5V
Electro-Optical Characteristics (Ta=25℃, and Vcc=5 V)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
Condition
Consumption Current
Icc
---
---
3
mA
No signal input
B.P.F Center Frequency
Fo
---
32.8
---
KHz
Peak Wavelength
λp
---
940
---
nm
L0
8
---
---
L45
4
---
---
Half Angle(Horizontal)
Θh
---
45
---
deg
Half Angle(Vertical)
Θv
---
45
---
deg
High Level Pulse Width
TH
400
---
800
μs
Low Level Pulse Width
TL
400
---
800
μs
High Level Output Voltage
VH
4.5
---
---
V
Low Level Output Voltage
VL
---
0.2
0.5
V
Reception Distance
m
At the ray axis
*1
At the ray axis
*2
Notes:
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°.
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 3 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Test Method:
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
cMeasurement place
A place that is nothing of extreme light reflected in the room.
dExternal light
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee≦10Lux)
eStandard transmitter
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).
(Standard light / Light source temperature 2856°K).
fMeasuring system
According to the measuring system shown in Fig.-3
Fig.-1
Transmitter Wave Form
D.U.T output Pulse
Carrier frequency is adjusted to
center frequency of each product.
IR TANSMITTER
OUTPUT WAVE FORM
OUTPUT PULSE
OF DEVICE
Duty=0.5
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 4 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Fig.-2
Measuring Method
Fig.-3
Measuring System
20cm
10k
+5.0± 0.1V
L: Transmission Distance
Vcc
10uF
θ θ
OUT
Standard Transmitter
D.U.T
Vout
Standard Transmitter
100k
Vout
GND
Oscilloscope
θ: Angle Of Horizontal & Vertical Direction
Block Diagram:
Application Circuit:
RC Filter should be connected closely between Vcc pin and GND pin.
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 5 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Typical Electro-Optical Characteristics Curves
Fig.-4 Relative Spectral Sensitivity vs.
Wavelength
Fig.-5 Relative Transmission Distance vs.
Direction
θ
Fig.-6 Output Pulse Length vs. Arrival Distance
Fig.-7 Arrival Distance vs. Supply Voltage
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 6 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Typical Electro-Optical Characteristics Curves
Fig.-8 Relative Transmission Distance
vs. Center Carrier Frequency
Fig.-9 Arrival Distance vs. Ambient Temperature
12.5
10.0
7.5
5.0
2.5
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 7 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Reliability Test Item And Condition
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test Items
1 cycle
Temperature cycle
Failure Judgement
Criteria
Test Conditions
-25℃
Samples(n)
Defective(c)
+85℃
(30min)(5min)(30min)
300 cycle test
n=22,c=0
Temp: +85℃
High temperature test Vcc:5V
1000hrs
Low temperature
storage
High temperature
High humidity
Solder heat
L0≦ L×0.8
L45≦ L×0.8
Temp: -40℃
n=22,c=0
n=22,c=0
1000hrs
Ta: 85℃,RH:85%
L: Lower
specification limit
n=22,c=0
1000hrs
Temp: 260±5℃ 10sec
n=22,c=0
4mm From the bottom of the package.
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 8 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-8608S-1
Packing Quantity Specification
1. 1000 PCS/1Box
2. 10 Boxes/1Carton
Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
IRM-8608S-1
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 1.1
Page: 9 of 9
Device No:DMO-860-075
Prepared date:08-19-2004
Prepared by:CarryllHsu
Similar pages