Ohmite IS175 Ultra low profile power resistor Datasheet

IS Series
Ultra Low Profile Power Resistors
F e at u r e s
• Heatsinkable
• Rugged construction
• Low profile
• Ultra low profile thick• High power
film on steel
• Pulse handling capability • 175W to 270W sizes
• Non-flammable
• Single fixing heatsink
mountable
• Low inductances
• Available with fast-on terminals or wire leads
uses
• Braking resistors
• In-rush current limiter
• Bleeder resistor
• Power switching
• Soft charging
S ERIE S S P ECI F ICATI O N S
Power Resistance
Rating
Range
Type (watts)
(Ω)
Tolerance
IS175 175 5Ω to 10KΩ 10%, 20%
IS200 200 5Ω to 10KΩ 10%, 20%
IS250 250 5Ω to 10KΩ 10%, 20%
IS270 270 5Ω to 10KΩ 10%, 20%
Construction
Dielectric Termination
Glass Overcoat
Resistive Glaze
Stainless Steel
characteristics
TCR <250ppm (surface temp less than 150°C)
Derating
Maximum element 365°C
temperature
Over-voltage rating 5X rated power for up to for up to 1 second
Resistive element
Film
Derating element surface temp. at 100% to 0% power
at 200°C surface temp.
% Rated Power
Working voltage Not to exceed 300V
120
100
80
60
40
20
Power rating dependent on mounting and heatsink thermal capacity
0
Hot spot surface 200°C max.
temperature
Pulsed load at full Max. 1%ΔR; (see Fig 1)
pulse power rating Mounted on a 0.06°C/W heatsink with
1,000 cycles forced air cooling, air temperature 25°C (ref
AH32430 12" long)
Solder Silver solder is recommended for IS Series
resistors. Leaching of the silver in the termination will occur if non-silver solder is used.
60/40 tin-lead solders are not recommended
for use with the IS Series product.
Screw torque 3.5 Nm
0
50
100
150
200
Resistor Surface Temp., oC
250
THIS PRODUCT IS
DESIGNED FOR USE WITH
PROPER HEATSINKING.
Maximum base plate temperature of
the resistor must be monitored and
kept within specified limits to establish the power rating. Best technique
is to attach a thermocouple to the
side of the base plate of the resistor.
(continued)
136
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]
IS Series
Ultra Low Profile Power Resistors
d i m e ns i ons
(in/mm)
Thickness: 0.050 in. ±.015 / 1.27mm
L
Type
Wattage L ±0.2mm
W ±0.2mm
IS175
175 1.94/49.30 1.41/35.90
IS200
200 2.40/61.00 1.60/40.60
IS250
250 4.00/101.60 2.76/70.00
IS270
270 4.80/122.00 2.76/70.00
ØD nom. Wt. nom (oz/g)
0.13/3.20 0.44/12.60
0.21/5.30 0.60/17.10
0.21/5.30 1.78/50.80
0.21/5.30 2.12/60.70
W
D
T e r m i n a t i on O p t i ons
Solder pad only
SnAg (96S)
Flying leads
Push-on
connectors
9mm
0.250"
9mm
10" 14AWG
O R D ERI N G I N F O R M ATI O N
Tolerance
K = 10% RoHS
M = 20% Compliant
IS200C47RKE
Series
Wattage Termination
Resistance
Insulated 175
A = Tinned pad
3 digits
Steel
200
B = Soldered lead 47R = 47Ω
250
C = Fast on terminal
270
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]
137
0.032"
Similar pages