Lattice ISPLSI1016EA-200LJ44 In-system programmable high density pld Datasheet

ispLSI 1016EA
®
In-System Programmable High Density PLD
Functional Block Diagram
• HIGH-DENSITY PROGRAMMABLE LOGIC
— 2000 PLD Gates
— 32 I/O Pins, One Dedicated Input
— 96 Registers
— High-Speed Global Interconnect
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— Functionally Compatible with ispLSI 1016E
• NEW FEATURES
— 100% IEEE 1149.1 Boundary Scan Testable
— ispJTAG™ In-System Programmable via IEEE 1149.1
(JTAG) Test Access Port
— User-Selectable 3.3V or 5V I/O Supports MixedVoltage Systems (VCCIO Pin)
— Open-Drain Output Option
B7
D Q
A2
Logic
A3
Array
B6
B5
D Q
D Q
GLB
B4
B3
A4
D Q
EW
Output Routing Pool
A0
A1
Output Routing Pool
Features
A5
A6
Global Routing Pool (GRP)
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
N
A7
B2
B1
B0
CLK
E2CMOS®
TECHNOLOGY
• HIGH-PERFORMANCE
— fmax = 200 MHz Maximum Operating Frequency
— tpd = 4.5 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— Electrically Erasable and Reprogrammable
— Non-Volatile
— 100% Tested at Time of Manufacture
— Unused Product Term Shutdown Saves Power
0139C/1016EA
Description
The ispLSI 1016EA is a High Density Programmable
Logic Device containing 96 Registers, 32 Universal I/O
pins, one Dedicated Input pin, two Dedicated Clock Input
pins, one Global OE input pin and a Global Routing Pool
(GRP). The GRP provides complete interconnectivity
between all of these elements. The ispLSI 1016EA features 5V in-system programmability (ISP™) and in-system
diagnostic capabilities via an IEEE 1149.1 Test Access
Port. The ispLSI 1016EA offers non-volatile
reprogrammability of the logic, as well as the interconnect to provide truly reconfigurable systems. A functional
superset of the ispLSI 1016 architecture, the ispLSI
1016EA device adds user-selectable 3.3V or 5V I/O and
open-drain output options.
• IN-SYSTEM PROGRAMMABLE
— Increased Manufacturing Yields, Reduced Time-toMarket and Improved Product Quality
— Reprogram Soldered Device for Faster Prototyping
SE
is
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Three Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
U
The basic unit of logic on the ispLSI 1016EA device is the
Generic Logic Block (GLB). The GLBs are labeled A0,
A1...B7 (Figure 1). There are a total of 16 GLBs in the
ispLSI 1016EA device. Each GLB has 18 inputs, a
programmable AND/OR/Exclusive OR array, and four
outputs which can be configured to be either combinatorial or registered. Inputs to the GLB come from the GRP
and a dedicated input. All of the GLB outputs are brought
back into the GRP so that they can be connected to the
inputs of any other GLB on the device.
Copyright © 2007 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
1016ea_02.1
1
April 2007
Specifications ispLSI 1016EA
Functional Block Diagram
Figure 1. ispLSI 1016EA Functional Block Diagram
VCCIO
Generic
Logic Blocks
(GLBs)
GOE 0
I/O 31
I/O 30
I/O 29
I/O 28
I/O 12
I/O 13
I/O 14
I/O 15
B5
A2
A3
Global
Routing
Pool
(GRP)
A4
B4
B3
B2
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
Input Bus
I/O 8
I/O 9
I/O 10
I/O 11
Output Routing Pool (ORP)
I/O 4
I/O 5
I/O 6
I/O 7
A5
lnput Bus
B6
A1
Output Routing Pool (ORP)
A0
N
EW
B7
I/O 0
I/O 1
I/O 2
I/O 3
I/O 27
I/O 26
I/O 25
I/O 24
I/O 23
I/O 22
I/O 21
I/O 20
I/O 19
I/O 18
I/O 17
I/O 16
B1
A6
B0
A7
TDI
Clock
Distribution
Network
TMS
TCK
Y0
Y1/RESET*
Megablock
TDO
*Note: Y1 and RESET are multiplexed on the same pin
U
SE
is
The device also has 32 I/O cells, each of which is directly
connected to an I/O pin. Each I/O cell can be individually
programmed to be a combinatorial input, registered
input, latched input, output or bi-directional
I/O pin with 3-state control. The signal levels are TTL
compatible voltages and the output drivers can source
2 mA or sink 8 mA. Each output can be programmed
independently for fast or slow output slew rate to minimize overall output switching noise. By connecting the
VCCIO pin to a common 5V or 3.3V power supply, I/O
output levels can be matched to 5V or 3.3V-compatible
voltages.
Eight GLBs, 16 I/O cells, a dedicated input (if available)
and one ORP are connected together to make a
Megablock (see Figure 1). The outputs of the eight GLBs
are connected to a set of 16 universal I/O cells by the
ORP. Each ispLSI 1016EA device contains two
Megablocks.
The GRP has, as its inputs, the outputs from all of the
GLBs and all of the inputs from the bi-directional I/O cells.
All of these signals are made available to the inputs of the
GLBs. Delays through the GRP have been equalized to
minimize timing skew.
CLK 0
CLK 1
CLK 2
IOCLK 0
IOCLK 1
0139/1016EA
Clocks in the ispLSI 1016EA device are selected using
the Clock Distribution Network. Two dedicated clock pins
(Y0 and Y1) are brought into the distribution network, and
five clock outputs (CLK 0, CLK 1, CLK 2, IOCLK 0 and
IOCLK 1) are provided to route clocks to the GLBs and
I/O cells. The Clock Distribution Network can also be
driven from a special clock GLB (B0 on the ispLSI
1016EA device). The logic of this GLB allows the user to
create an internal clock from a combination of internal
signals within the device.
Programmable Open-Drain Outputs
In addition to the standard output configuration, the
outputs of the ispLSI 1016EA are individually programmable, either as a standard totem-pole output or an
open-drain output. The totem-pole output drives the
specified Voh and Vol levels, whereas the open-drain
output drives only the specified Vol. The Voh level on the
open-drain output depends on the external loading and
pull-up. This output configuration is controlled by a programmable fuse. The default configuration when the
device is in bulk erased state is totem-pole configuration.
The open-drain/totem-pole option is selectable through
the Lattice software tools.
2
Specifications ispLSI 1016EA
Boundary Scan
Figure 2. Boundary Scan Waveforms and Timing Specifications
TMS
Tbtsu
Tbtch
N
EW
TDI
Tbth
Tbtcl
Tbtcp
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
TCK
Tbtvo
TDO
Tbtco
Valid Data
Tbtcpsu
Data to be
captured
Tbtoz
Valid Data
Tbtcph
Data Captured
Tbtuov
Data to be
driven out
Tbtuco
Valid Data
Parameter
is
Symbol
Tbtuoz
Valid Data
Min
Max
Units
TCK [BSCAN test] clock pulse width
100
–
ns
tbtch
TCK [BSCAN test] pulse width high
50
–
ns
tbtcl
TCK [BSCAN test] pulse width low
50
–
ns
tbtsu
TCK [BSCAN test] setup time
20
–
ns
TCK [BSCAN test] hold time
25
–
ns
TCK [BSCAN test] rise and fall time
50
–
mV/ns
tbtco
TAP controller falling edge of clock to valid output
–
25
ns
tbtoz
TAP controller falling edge of clock to data output disable
–
25
ns
tbtvo
TAP controller falling edge of clock to data output enable
–
25
ns
tbtcpsu
BSCAN test Capture register setup time
40
–
ns
tbtcph
BSCAN test Capture register hold time
25
–
ns
tbtuco
BSCAN test Update reg, falling edge of clock to valid output
–
50
ns
tbtuoz
BSCAN test Update reg, falling edge of clock to output disable
–
50
ns
tbtuov
BSCAN test Update reg, falling edge of clock to output enable
–
50
ns
trf
U
tbth
SE
tbtcp
3
Specifications ispLSI 1016EA
Absolute Maximum Ratings 1
Supply Voltage VCC ................................ -0.5 to +7.0V
Input Voltage Applied ........................ -2.5 to VCC +1.0V
Off-State Output Voltage Applied ..... -2.5 to VCC +1.0V
Storage Temperature ................................ -65 to 150°C
Case Temp. with Power Applied .............. -55 to 125°C
N
EW
Max. Junction Temp. (TJ) with Power Applied ... 150°C
1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional
operation of the device at these or at any other conditions above those indicated in the operational sections of this specification
is not implied (while programming, follow the programming specifications).
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
DC Recommended Operating Conditions
PARAMETER
SYMBOL
VCC
Supply Voltage
MIN.
MAX.
UNITS
4.75
5.25
V
5V
4.75
5.25
V
3.3V
3.0
3.6
V
0.8
V
Vcc+1
V
Commercial
TA = 0°C to + 70°C
VCCIO
Supply Voltage: Output Drivers
VIL
VIH
Input Low Voltage
0
Input High Voltage
2.0
Table 2-0005/1016EA
Capacitance (TA=25oC, f=1.0 MHz)
SYMBOL
PARAMETER
TYPICAL
UNITS
TEST CONDITIONS
Dedicated Input, I/O, Y1, Y2, Y3, Clock Capacitance
(Commercial)
8
pf
VCC = 5.0V, VPIN = 2.0V
C2
Y0 Clock Capacitance
10
pf
VCC = 5.0V, VPIN = 2.0V
SE
is
C1
Table 2-0006/1016EA
Erase/Reprogram Specifications
U
PARAMETER
Erase/Reprogram Cycles
MINIMUM
MAXIMUM
UNITS
10000
—
Cycles
Table 2-0008/1016EA
4
Specifications ispLSI 1016EA
Switching Test Conditions
Input Pulse Levels
Figure 3. Test Load
GND to 3.0V
Input Rise and Fall Time 10% to 90%
1.5ns
Input Timing Reference Levels
1.5V
Output Timing Reference Levels
1.5V
Output Load
+ 5V
R1
See Figure 3
Table 2-0003/1016EA
3-state levels are measured 0.5V from
steady-state active level.
Device
Output
CL
470Ω
390Ω
35pF
B
Active High
∞
390Ω
35pF
Active Low
470Ω
390Ω
35pF
C
∞
390Ω
5pF
470Ω
390Ω
5pF
Active High to Z
at VOH -0.5V
Active Low to Z
at VOL +0.5V
N
EW
R2
*CL includes Test Fixture and Probe Capacitance.
0213a
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
R1
A
CL*
R2
Output Load Conditions (see Figure 3)
TEST CONDITION
Test
Point
Table 2-0004/1016E
DC Electrical Characteristics
Over Recommended Operating Conditions
SYMBOL
VOL
Output Low Voltage
VOH
Output High Voltage
IIL
Input or I/O Low Leakage Current
IIH
Input or I/O High Leakage Current
IIL-PU
IOS1
I/O Active Pull-Up Current
TYP.3
—
—
0.4
V
IOH = -2 mA, VCCIO = 3.0V
2.4
—
—
V
IOH = -4 mA, VCCIO = 4.75V
IOL = 8 mA
MAX. UNITS
—
—
V
—
—
-10
μA
(VCCIO - 0.2)V ≤ VIN ≤ VCCIO
—
—
10
μA
VCCIO ≤ VIN ≤ 5.25V
—
—
10
μA
0V ≤ VIN ≤ VIL
—
—
-200
μA
Output Short Circuit Current
VCCIO = 5.0V or 3.3V, VOUT = 0.5V
—
—
-240
mA
Operating Power Supply Current
VIL = 0.0V, VIH = 3.0V
fTOGGLE = 1 MHz
—
91
—
mA
SE
is
2.4
0V ≤ VIN ≤ VIL (Max.)
U
ICC2, 4, 5
MIN.
CONDITION
PARAMETER
Table 2-0007/1016EA
1. One output at a time for a maximum duration of one second. VOUT = 0.5V was selected to avoid test
problems by tester ground degradation. Characterized but not 100% tested.
2. Measured using four 16-bit counters.
3. Typical values are at VCC = 5V and TA = 25°C.
4. Unused inputs held at 0.0V.
5. Maximum ICC varies widely with specific device configuration and operating frequency. Refer to the
Power Consumption section of this data sheet and the Thermal Management section of the Lattice Semiconductor
Data Book CD-ROM to estimate maximum ICC.
5
Specifications ispLSI 1016EA
External Timing Parameters
Over Recommended Operating Conditions
4
DESCRIPTION
A
1
Data Propagation Delay, 4PT Bypass, ORP Bypass
A
2
A
3
—
4
1
—
4.5
Data Propagation Delay, Worst Case Path
—
Clock Frequency with Internal Feedback 3
200
Clock Frequency with External Feedback ( tsu2 + tco1) 143
1
(
-100
-125
MIN. MAX. MIN. MAX. MIN. MAX.
1
twh + twl
)
—
5
Clock Frequency, Max. Toggle
—
6
GLB Reg. Setup Time before Clock,4 PT Bypass
A
7
GLB Reg. Clock to Output Delay, ORP Bypass
—
—
8
GLB Reg. Hold Time after Clock, 4 PT Bypass
0.0
—
9
GLB Reg. Setup Time before Clock
3.5
—
10 GLB Reg. Clock to Output Delay
—
—
11 GLB Reg. Hold Time after Clock
0.0
A
12 Ext. Reset Pin to Output Delay
—
250
3.0
UNITS
ns
—
10.0
10.0
—
12.5
ns
—
100
—
MHz
100
—
77
—
MHz
167
—
125
—
MHz
—
7.5
6.0
—
—
125
—
—
—
4.5
—
6.0
—
ns
3.5
—
4.5
—
6.0
ns
—
0.0
—
0.0
—
ns
—
5.5
—
7.0
—
ns
4.0
—
5.5
—
7.0
ns
—
0.0
—
0.0
—
ns
5.5
—
10.0
—
13.5
ns
—
13 Ext. Reset Pulse Duration
3.5
—
5.0
—
6.5
—
ns
B
14 Input to Output Enable
—
7.0
—
12.0
—
15.0
ns
C
15 Input to Output Disable
—
7.0
—
12.0
—
15.0
ns
B
16 Global OE Output Enable
—
4.5
—
7.0
—
9.0
ns
C
17 Global OE Output Disable
—
4.5
—
7.0
—
9.0
ns
—
18 External Synchronous Clock Pulse Duration, High
2.0
—
3.0
—
4.0
—
ns
—
19 External Synchronous Clock Pulse Duration, Low
2.0
—
3.0
—
4.0
—
ns
—
20
I/O Reg. Setup Time before Ext. Sync Clock (Y1)
3.0
—
3.0
—
3.5
—
ns
—
21
I/O Reg. Hold Time after Ext. Sync. Clock (Y1)
0.0
—
0.0
—
0.0
—
ns
SE
is
Unless noted otherwise, all parameters use a GRP load of four GLBs, 20 PTXOR path, ORP and Y0 clock.
Refer to Timing Model in this data sheet for further details.
Standard 16-bit counter using GRP feedback.
Reference Switching Test Conditions section.
U
1.
2.
3.
4.
#2
N
EW
tpd1
tpd2
fmax (Int.)
fmax (Ext.)
fmax (Tog.)
tsu1
tco1
th1
tsu2
tco2
th2
tr1
trw1
tptoeen
tptoedis
tgoeen
tgoedis
twh
twl
tsu3
th3
-200
TEST
COND.
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
PARAMETER
6
Table 2-0030A/1016EA
v.2.6
Specifications ispLSI 1016EA
Internal Timing Parameters1
PARAM.
#
2
-200
DESCRIPTION
-125
-100
MIN. MAX. MIN. MAX. MIN. MAX.
UNITS
Inputs
22 I/O Register Bypass
23 I/O Latch Delay
–
0.3
0.4
ns
–
4.0
–
4.0
–
4.0
ns
–
3.0
–
3.4
–
ns
25 I/O Register Hold Time after Clock
0.0
–
0.0
–
0.0
–
ns
26 I/O Register Clock to Out Delay
–
4.0
–
4.6
–
5.0
ns
27 I/O Register Reset to Out Delay
–
28 Dedicated Input Delay
–
29 GRP Delay, 1 GLB Load
–
1.3
–
1.7
–
2.1
ns
30 GRP Delay, 4 GLB Loads
–
1.5
–
1.9
–
2.3
ns
31 GRP Delay, 8 GLB Loads
–
1.7
–
2.1
–
2.5
ns
32 GRP Delay, 16 GLB Loads
–
2.1
–
2.5
–
2.9
ns
33 4 ProductTerm Bypass Path Delay (Combinatorial)
–
1.7
–
3.4
–
4.9
ns
34 4 Product Term Bypass Path Delay (Registered)
–
1.8
–
3.1
–
4.9
ns
35 1 ProductTerm/XOR Path Delay
–
1.9
–
3.6
–
4.3
ns
36 20 Product Term/XOR Path Delay
–
1.9
–
3.6
–
4.3
ns
37 XOR Adjacent Path Delay 3
–
1.9
–
3.6
–
4.3
ns
38 GLB Register Bypass Delay
–
0.6
–
1.2
–
2.1
ns
39 GLB Register Setup Time before Clock
0.2
–
0.3
–
1.4
–
ns
40 GLB Register Hold Time after Clock
1.0
–
3.5
–
4.0
–
ns
41 GLB Register Clock to Output Delay
–
1.4
–
1.4
–
1.7
ns
42 GLB Register Reset to Output Delay
–
3.8
–
4.9
–
5.0
ns
43 GLB Product Term Reset to Register Delay
–
2.5
–
3.8
–
4.5
ns
44 GLB Product Term Output Enable to I/O Cell Delay
–
2.1
–
5.7
–
7.2
ns
1.5
2.5
2.8
3.9
3.5
4.7
ns
–
0.0
–
0.3
–
0.3
ns
47 ORP Delay
–
0.8
–
1.3
–
1.4
ns
48 ORP Bypass Delay
–
0.1
–
0.2
–
0.4
ns
4.0
–
4.6
–
5.0
ns
1.1
–
1.9
–
2.2
ns
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
is
SE
45 GLB Product Term Clock Delay
46 GLB Feedback Delay
U
ORP
torp
torpbp
–
3.0
GLB
t4ptbpc
t4ptbpr
t1ptxor
t20ptxor
txoradj
tgbp
tgsu
tgh
tgco
tgro
tptre
tptoe
tptck
tgfb
0.3
24 I/O Register Setup Time before Clock
GRP
tgrp1
tgrp4
tgrp8
tgrp16
–
N
EW
tiobp
tiolat
tiosu
tioh
tioco
tior
tdin
1. Internal Timing Parameters are not tested and are for reference only.
2. Refer to Timing Model in this data sheet for further details.
3. The XOR adjacent path can only be used by hard macros.
7
Table 2-0036A/1016EA
v.2.6
Specifications ispLSI 1016EA
Internal Timing Parameters1
PARAM.
#
-200
DESCRIPTION
-125
-100
MIN. MAX. MIN. MAX. MIN. MAX.
UNITS
Outputs
49 Output Buffer Delay
—
0.9
—
1.7
—
2.0
50 Output Buffer Delay, Slew Limited Adder
—
5.0
—
5.0
—
5.0
ns
51 I/O Cell OE to Output Enabled
—
3.1
—
4.0
—
5.1
ns
52 I/O Cell OE to Output Disabled
—
3.1
—
4.0
—
5.1
ns
53 Global OE
—
1.4
—
3.0
—
3.9
ns
Clocks
tgr
1.1
1.1
1.9
1.9
ns
0.9
0.9
0.9
1.5
1.5
ns
1.8
0.8
1.8
0.8
1.8
ns
0.0
0.0
0.0
0.0
0.0
0.0
ns
0.8
2.8
0.8
2.8
0.8
2.8
ns
—
0.0
—
2.1
—
5.1
ns
0.9
55 Clock Delay, Y1 to Global GLB Clock Line
0.9
56 Clock Delay, Clock GLB to Global GLB Clock Line
0.8
57 Clock Delay, Y1 to I/O Cell Global Clock Line
58 Clock Delay, Clock GLB to I/O Cell Global Clock Line
Global Reset
59 Global Reset to GLB and I/O Registers
U
SE
is
1. Internal Timing Parameters are not tested and are for reference only.
8
ns
0.9
54 Clock Delay, Y0 to Global GLB Clock Line (Ref. clk)
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
tgy0
tgy1
tgcp
tioy1
tiocp
N
EW
tob
tsl
toen
todis
tgoe
Table 2-0037A/1016EA
v.2.6
Specifications ispLSI 1016EA
ispLSI 1016EA Timing Model
I/O Cell
GRP
GLB
#46
Ded. In
I/O Pin
(Input)
#59
ORP
Feedback
#33
#28
Comb 4 PT Bypass
GLB Reg Bypass
ORP Bypass
#22
#30
#34
#38
#48
Input
D Register Q
RST
#23 - 27
GRP Loading
Delay
20 PT
XOR Delays
GLB Reg
Delay
ORP
Delay
#29, 31 - 32
#35 - 37
I/O Reg Bypass
GRP4
I/O Cell
Reg 4 PT Bypass
D
Q
#49, 50
#51, 52
#47
Clock
Distribution
Y1
Control RE
PTs
OE
#43 - 45 CK
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
#55 - 58
#39 - 42
N
EW
RST
#59
Reset
#54
Y0
#53
GOE 0
Derivations of tsu, th and tco from the Product Term Clock 1
=
=
=
0.9 =
Logic + Reg su - Clock (min)
(tiobp + tgrp4 + t20ptxor) + (tgsu) - (tiobp + tgrp4 + tptck(min))
(#22 + #30 + #36) + (#39) - (#22 + #30 + #45)
(0.3 + 1.5 + 1.9) + (0.2) - (0.3 + 1.5 + 1.2)
th
=
=
=
1.6 =
Clock (max) + Reg h - Logic
(tiobp + tgrp4 + tptck(max)) + (tgh) - (tiobp + tgrp4 + t20ptxor)
(#22 + #30 + #45) + (#40) - (#22 + #30 + #36)
(0.3 + 1.5 + 2.5) + (1.0) - (0.3 + 1.5 + 1.9)
tco
=
=
=
7.2 =
Clock (max) + Reg co + Output
(tiobp + tgrp4 + tptck(max)) + (tgco) + (torp + tob)
(#22 + #30 + #45) + (#41) + (#47 + #49)
(0.3 + 1.5 + 2.5) + (1.4) + (0.8 + 0.9)
is
tsu
SE
Derivations of tsu, th and tco from the Clock GLB 1
tsu
=
=
=
1.1 =
th
=
=
=
1.4 =
Clock (max) + Reg (hold) - Logic
(tgy0(max) + tgco + tgcp(max)) + (tgh) - (tiobp + tgrp4 + t20ptxor)
(#54 + #41 + #56) + (#40) - (#22 + #30 + #36)
(0.9 + 1.4 + 1.8) + (1.0) - (0.3 + 1.5 + 1.9)
tco
=
=
=
7.2 =
Clock (max) + Reg (clock-to-out) + Output
(tgy0(max) + tgco + tgcp(max)) + (tgco) + (torp + tob)
(#54 + #41 + #56) + (#41) + (#47 + #49)
(0.9 + 1.4 + 1.8) + (1.4) + (0.8 + 0.9)
U
Logic + Reg (setup) - Clock (min)
(tiobp + tgrp4 + t20ptxor) + (tgsu) - (tgy0(min) + tgco + tgcp(min))
(#22 + #30 + #36) + (#39) - (#54 + #41 + #56)
(0.3 + 1.5 + 1.9) + (0.2) - (0.9 + 1.4 + 0.8)
1. Calculations are based upon timing specifications for the ispLSI 1016EA-200.
Table 2-0042a/1016EA
v.2.6
9
0491/1016EA
I/O Pin
(Output)
Specifications ispLSI 1016EA
Maximum GRP Delay vs GLB Loads
GRP Delay (ns)
4
3
ispLSI 1016EA-100
ispLSI 1016EA-125
1
1
4
8
16
GLB Load
Power Consumption
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
GRP/GLB/1016EA
N
EW
ispLSI 1016EA-200
2
used. Figure 4 shows the relationship between power
and operating speed.
Power consumption in the ispLSI 1016EA device depends on two primary factors: the speed at which the
device is operating and the number of Product Terms
Figure 4. Typical Device Power Consumption vs fmax
150
ispLSI 1016EA
140
120
110
is
ICC (mA)
130
U
SE
100
90
80
0
50
100
150
200
250
fmax (MHz)
Notes: Configuration of four 16-bit counters
Typical current at 5V, 25°C
ICC can be estimated for the ispLSI 1016EA using the following equation:
ICC(mA) = 23 + (# of PTs * 0.52) + (# of nets * max freq * 0.004)
Where:
# of PTs = Number of product terms used in design
# of nets = Number of signals used in device
Max freq = Highest clock frequency to the device (in MHz)
The ICC estimate is based on typical conditions (VCC = 5.0V, room temperature) and an assumption of four GLB loads
on average exists and the device is filled with four 16-bit counters. These values are for estimates only. Since the
value of ICC is sensitive to operating conditions and the program in the device, the actual ICC should be verified.
0127/1016EA
10
Specifications ispLSI 1016EA
Pin Description
TQFP
PIN NUMBERS
PLCC
PIN NUMBERS
NAME
18,
22,
28,
32,
40,
44,
6,
10
10,
14,
20,
24,
32,
36,
42,
2,
11,
15,
21,
25,
33,
37,
43,
3,
12,
16,
22,
26,
34,
38,
44,
4
15,
19,
25,
29,
37,
41,
3,
7,
GOE 0/IN 31
2
40
This is a dual function pin. It can be used either as Global Output Enable for
all I/O cells or it can be used as a dedicated input pin.
TDI
14
8
Input - Functions as an input pin to load programming data into the device and
also used as one of the two control pins for the ispJTAG state machine.
TMS
36
30
Input - Controls the operation of the ISP state machine.
TDO
24
18
Output - Functions as an output pin to read serial shift register data.
TCK
33
Y0
11
Y1/RESET1
35
Input/Output Pins - These are the general purpose I/O pins used by the logic
array.
N
EW
17,
21,
27,
31,
39,
43,
5,
9,
9,
13,
19,
23,
31,
35,
41,
1,
I/O 0 - I/O 3
I/O 4 - I/O 7
I/O 8 - I/O 11
I/O 12 - I/O 15
I/O 16 - I/O 19
I/O 20 - I/O 23
I/O 24 - I/O 27
I/O 28 - I/O 31
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
16,
20,
26,
30,
38,
42,
4,
8,
DESCRIPTION
27
Input - Functions as a clock pin for the Serial Shift Register.
5
Dedicated Clock input. This clock input is connected to one of the clock inputs
of all of the GLBs on the device.
29
This pin performs two functions:
Dedicated Clock input. This clock input is brought into the clock distribution
network, and can optionally be routed to any GLB on the device.
Active Low (0) Reset pin which resets all of the GLB and I/O registers in the
device.
GND
1,
VCC
12, 34
VCCIO
13
23
17, 39
Ground (GND)
6,
VCC
7
28
Supply voltage for output drivers, 5V or 3.3V.
U
SE
is
1. Pins have dual function capability which is software selectable.
11
Table 2-0002C/1016EA
Specifications ispLSI 1016EA
Pin Configurations
I/O 20
I/O 19
I/O 21
I/O 22
I/O 23
GND
GOE 0/IN 31
I/O 24
I/O 26
I/O 25
I/O 27
ispLSI 1016EA 44-Pin PLCC Pinout Diagram
6 5 4 3 2 1 44 43 42 41 40
7
39
I/O 18
I/O 29
8
38
I/O 17
I/O 30
9
37
I/O 16
I/O 31
10
11
36
TMS
Y1/RESET1
VCC
N
EW
I/O 28
12
ispLSI 1016EA
35
34
VCCIO
13
Top View
33
TCK
TDI
14
32
I/O 15
I/O 0
15
31
I/O 14
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
Y0
VCC
I/O 1
I/O 2
16
17
30
29
I/O 13
I/O 12
I/O 11
I/O 10
I/O 9
I/O 8
TDO
GND
I/O 7
I/O 6
I/O 4
I/O 5
I/O 3
18 19 20 21 22 23 24 25 26 27 28
1. Pins have dual function capability which is software selectable.
0123A-isp1016EA
is
SE
I/O 21
I/O 20
I/O 19
I/O 22
GND
I/O 23
GOE 0/IN 31
I/O 24
44 43 42 41 40 39 38 37 36 35 34
I/O 28
I/O 29
I/O 30
I/O 31
Y0
VCC
1
2
3
4
5
ispLSI 1016EA
6
Top View
33
I/O 18
32
31
I/O 17
I/O 16
30
TMS
29
28
Y1/RESET1
VCC
VCCIO
7
27
TCK
TDI
8
26
I/O 15
I/O 0
I/O 1
9
10
I/O 14
I/O 13
I/O 2
11
25
24
23
I/O 12
I/O 9
I/O 10
I/O 11
I/O 8
GND
TDO
I/O 7
I/O 6
I/O 4
I/O 5
12 13 14 15 16 17 18 19 20 21 22
I/O 3
U
I/O 26
I/O 25
I/O 27
ispLSI 1016EA 44-Pin TQFP Pinout Diagram
1. Pins have dual function capability which is software selectable.
44 TQFP/1016EA
12
Specifications ispLSI 1016EA
Part Number Description
ispLSI 1016EA —XXX
X
XXX
X
Device Family
Grade
Blank = Commercial
Device Number
Package
J44 = PLCC
T44 = TQFP
Speed
200 = 200 MHz fmax
125 = 125 MHz fmax
100 = 100 MHz fmax
N
EW
Power
L = Low
0212/1016EA
pM
5V AC
H
D 4
ES A
IG 5 F
N O
S R
ispLSI 1016EA Ordering Information
COMMERCIAL
FAMILY
fmax (MHz)
200
200
125
ispLSI
125
100
100
Revision History
—
April 2007
02.1
PACKAGE
4.5
ispLSI 1016EA-200LJ44
44-Pin PLCC
4.5
ispLSI 1016EA-200LT44
44-Pin TQFP
7.5
ispLSI 1016EA-125LJ44
44-Pin PLCC
7.5
ispLSI 1016EA-125LT44
44-Pin TQFP
10
ispLSI 1016EA-100LJ44
44-Pin PLCC
10
ispLSI 1016EA-100LT44
44-Pin TQFP
Table 2-0041A/1016EA
Change Summary
Previous Lattice releases.
is
Version
—
ORDERING NUMBER
Internal Timing Parameters table - Corrected value for tGSU in the -100 speed grade.
U
SE
Date
tpd (ns)
13
Similar pages