IXYS IXDN609CI 9a peak source/sink drive current Datasheet

IXD_609
9-Ampere Low-Side
Ultrafast MOSFET Drivers
INTEGRATED CIRCUITS DIVISION
Features
Description
• 9A Peak Source/Sink Drive Current
• Wide Operating Voltage Range: 4.5V to 35V
• -40°C to +125°C Extended Operating Temperature
Range
• Logic Input Withstands Negative Swing of up to 5V
• Matched Rise and Fall Times
• Low Propagation Delay Time
• Low, 10A Supply Current
• Low Output Impedance
The IXDD609/IXDI609/IXDN609 high-speed gate
drivers are especially well suited for driving the latest
IXYS MOSFETs and IGBTs. The IXD_609
high-current output can source and sink 9A of peak
current while producing voltage rise and fall times of
less than 25ns. The input is CMOS compatible, and is
virtually immune to latch up. Proprietary circuitry
eliminates cross-conduction and current
“shoot-through.” Low propagation delay and fast,
matched rise and fall times make the IXD_609 family
ideal for high-frequency and high-power applications.
Applications
•
•
•
•
•
•
Efficient Power MOSFET and IGBT Switching
Switch Mode Power Supplies
Motor Controls
DC to DC Converters
Class-D Switching Amplifiers
Pulse Transformer Driver
The IXDD609 is configured as a non-inverting driver
with an enable, the IXDN609 is configured as a
non-inverting driver, and the IXDI609 is configured as
an inverting driver.
The IXD_609 family is available in a standard 8-pin
DIP (PI); an 8-pin SOIC (SIA); an 8-pin Power SOIC
with an exposed metal back (SI); an 8-pin DFN (D2); a
5-pin TO-263 (YI); and a 5-pin TO-220 (CI).
Ordering Information
Part Number
IXDD609D2TR
IXDD609SI
IXDD609SITR
IXDD609SIA
IXDD609SIATR
IXDD609PI
IXDD609CI
IXDD609YI
IXDI609SI
IXDI609SITR
IXDI609SIA
IXDI609SIATR
IXDI609PI
IXDI609CI
IXDI609YI
IXDN609SI
IXDN609SITR
IXDN609SIA
IXDN609SIATR
IXDN609PI
IXDN609CI
IXDN609YI
DS-IXD_609-R06
Logic
Configuration
IN
OUT
EN
IN
OUT
IN
OUT
Package Type
Packing
Method
Quantity
8-Pin DFN
8-Pin Power SOIC with Exposed Metal Back
8-Pin Power SOIC with Exposed Metal Back
8-Pin SOIC
8-Pin SOIC
8-Pin DIP
5-Pin TO-220
5-Pin TO-263
8-Pin Power SOIC with Exposed Metal Back
8-Pin Power SOIC with Exposed Metal Back
8-Pin SOIC
8-Pin SOIC
8-Pin DIP
5-Pin TO-220
5-Pin TO-263
8-Pin Power SOIC with Exposed Metal Back
8-Pin Power SOIC with Exposed Metal Back
8-Pin SOIC
8-Pin SOIC
8-Pin DIP
5-Pin TO-220
5-Pin TO-263
Tape & Reel
Tube
Tape & Reel
Tube
Tape & Reel
Tube
Tube
Tube
Tube
Tape & Reel
Tube
Tape & Reel
Tube
Tube
Tube
Tube
Tape & Reel
Tube
Tape & Reel
Tube
Tube
Tube
2000
100
2000
100
2000
50
50
50
100
2000
100
2000
50
50
50
100
2000
100
2000
50
50
50
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
IXD_609
1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Pin Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5 Electrical Characteristics: TA = 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.6 Electrical Characteristics: TA = - 40°C to +125°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.7 Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3
3
3
3
4
4
5
2. IXD_609 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Timing Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Characteristics Test Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Block Diagrams & Truth Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 IXDD609 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 IXDI609 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 IXDN609 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
6
6
4. Typical Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1 Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 ESD Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3 Soldering Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4 Mechanical Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
www.ixysic.com
10
10
10
10
11
R06
IXD_609
INTEGRATED CIRCUITS DIVISION
1 Specifications
1.1 Pin Configurations
1.2 Pin Definitions
IXDD609 D2 / PI / SI / SIA
IXDD609 CI / YI
Pin Name
VCC
1
8
VCC
IN
2
7
OUT
EN
3
6
OUT
GND
4
5
GND
VCC
1
OUT
2
GND
3
IN
4
EN
5
IXDI609 PI / SI / SIA
VCC
1
8
VCC
IN
2
7
OUT
NC
GND
3
6
OUT
4
5
GND
IN
NC
GND
1
2
8
7
VCC
OUT
3
6
OUT
4
5
GND
IN
Logic Input
EN
Output Enable - Drive pin low to disable output,
and force output to a high impedance state
OUT
Output - Sources or sinks current to turn-on or
turn-off a discrete MOSFET or IGBT
OUT
Inverted Output - Sources or sinks current to
turn-on or turn-off a discrete MOSFET or IGBT
VCC
Supply Voltage - Provides power to the device
GND
Ground - Common ground reference for the
device
IXDI609 CI / YI
VCC
1
OUT
2
GND
3
IN
4
NC
5
IXDN609 PI / SI / SIA
VCC
Description
NC
IXDN609 CI / YI
VCC
1
OUT
2
GND
3
IN
4
NC
5
Not connected
1.3 Absolute Maximum Ratings
Parameter
Supply Voltage
Input Voltage
Output Current
Junction Temperature
Storage Temperature
Symbol
Minimum
Maximum
Units
VCC
-0.3
40
V
VIN, VEN
-5
VCC+0.3
V
IOUT
TJ
TSTG
-
±9
-55
+150
A
°C
-65
+150
°C
Unless stated otherwise, absolute maximum electrical ratings are at 25°C
Absolute maximum ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device.
Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not
implied.
1.4 Recommended Operating Conditions
Parameter
Supply Voltage
Operating Temperature Range
R06
Symbol
Range
Units
VCC
TA
4.5 to 35
V
-40 to +125
°C
www.ixysic.com
3
IXD_609
INTEGRATED CIRCUITS DIVISION
1.5 Electrical Characteristics: TA = 25°C
Test Conditions: 4.5V < VCC < 35V (unless otherwise noted).
Parameter
Conditions
Symbol
Minimum
Typical
Maximum
Input Voltage, High
4.5V < VCC < 18V
VIH
3.0
-
-
Input Voltage, Low
4.5V < VCC < 18V
VIL
-
-
0.8
0V < VIN < VCC
IIN
±10
A
IXDD609 only
VENH
2/3VCC
-
EN Input Voltage, High
-
EN Input Voltage, Low
IXDD609 only
VENL
-
V
Output Voltage, High
-
VOH
VCC-0.025
1/3VCC
-
-
Output Voltage, Low
-
VOL
-
-
0.025
Output Resistance, High State
VCC=18V, IOUT=-100mA
ROH
-
0.6
1
Output Resistance, Low State
ROL
-
0.4
0.8
IDC
-
-
±2
Rise Time
VCC=18V, IOUT=100mA
Limited by package power
dissipation
VCC=18V, CLOAD=10nF
tr
-
22
35
Fall Time
VCC=18V, CLOAD=10nF
tf
-
15
25
On-Time Propagation Delay
VCC=18V, CLOAD=10nF
tondly
-
40
60
Off-Time Propagation Delay
Enable to Output-High Delay Time
(IXDD609 Only)
Disable to High Impedance State Delay Time
(IXDD609 Only)
Enable Pull-Up Resistor
VCC=18V, CLOAD=10nF
toffdly
-
42
60
tENOH
-
25
60
tDOLD
-
35
60
REN
-
200
1
<1
<1
2
10
10
Input Current
Output Current, Continuous
Power Supply Current
VCC=18V
VCC=18V
VCC=18V, VIN=3.5V
VCC=18V, VIN=0V
VCC=18V, VIN=VCC
ICC
Units
V
V

A
ns
k
mA
A
1.6 Electrical Characteristics: TA = - 40°C to +125°C
Test Conditions: 4.5V < VCC < 35V unless otherwise noted.
Conditions
Symbol
Minimum
Input Voltage, High
Parameter
4.5V < VCC < 18V
VIH
Maximum
3.3
-
Input Voltage, Low
4.5V < VCC < 18V
VIL
-
0.65
0V < VIN < VCC
IIN
-
VOH
VCC-0.025
±10
Output Voltage, High
Output Voltage, Low
-
VOL
-
0.025
Output Resistance, High State
VCC=18V, IOUT=-100mA
ROH
-
2
Output Resistance, Low State
ROL
-
1.5
IDC
-
±1
Rise Time
VCC=18V, IOUT=100mA
Limited by package power
dissipation
VCC=18V, CLOAD=10nF
tr
-
40
Fall Time
VCC=18V, CLOAD=10nF
tf
-
30
On-Time Propagation Delay
VCC=18V, CLOAD=10nF
tondly
-
75
Off-Time Propagation Delay
VCC=18V, CLOAD=10nF
toffdly
-
75
Enable to Output-High Delay Time
IXDD609 only, VCC=18V
tENOH
-
75
Disable to High Impedance State Delay Time
IXDD609 only, VCC=18V
VCC=18V, VIN=3.5V
VCC=18V, VIN=0V
VCC=18V, VIN=VCC
tDOLD
-
75
2.5
150
150
Input Current
Output Current, Continuous
Power Supply Current
4
www.ixysic.com
ICC
-
Units
V
A
V

A
ns
mA
A
R06
IXD_609
INTEGRATED CIRCUITS DIVISION
1.7 Thermal Characteristics
Package
Parameter
Symbol
Rating
D2 (8-Pin DFN)
35
CI (5-Pin TO-220)
36
PI (8-Pin DIP)
125
JA
Thermal Resistance, Junction-to-Ambient
SI (8-Pin Power SOIC)
85
SIA (8-Pin SOIC)
120
YI (5-Pin TO-263)
46
CI (5-Pin TO-220)
Units
°C/W
3
JC
Thermal Resistance, Junction-to-Case
SI (8-Pin Power SOIC)
10
YI (5-Pin TO-263)
°C/W
2
2 IXD_609 Performance
2.1 Timing Diagrams
VIH
IN
VIH
IN
VIL
tondly
VIL
toffdly
toffdly
tondly
90%
OUT
OUT
10%
90%
10%
tf
tr
tf
tr
2.2 Characteristics Test Diagram
+
0.1μF
10μF
OUT
VCC
EN
VIN
R06
VCC
IN
VCC
-
GND
CLOAD
www.ixysic.com
Tektronix
Current Probe
6302
5
IXD_609
INTEGRATED CIRCUITS DIVISION
3 Block Diagrams & Truth Tables
3.1 IXDD609
3.3 IXDN609
VCC
VCC
IN
OUT
IN
OUT
GND
EN
GND
IN
EN
OUT
IN
OUT
0
1 or open
0
0
0
1
1 or open
1
1
1
x
0
Z
3.2 IXDI609
VCC
OUT
IN
GND
6
IN
OUT
0
1
1
0
www.ixysic.com
R06
IXD_609
INTEGRATED CIRCUITS DIVISION
4 Typical Performance Characteristics
Rise Time vs. Supply Voltage
(Input=0-5V, f=10kHz, TA=25ºC)
60
60
CL=10nF
CL=5.4nF
CL=1.5nF
50
40
30
20
30
20
10
0
0
5
10
15
20
25
Supply Voltage (V)
30
CL=10nF
CL=5.4nF
CL=1.5nF
40
10
0
35
5
10
15
20
25
Supply Voltage (V)
VCC=4.5V
VCC=8V
VCC=12V
VCC=18V
VCC=25V
VCC=30V
VCC=35V
40
30
Fall Time (ns)
Rise Time (ns)
50
20
4000
6000
8000
Load Capacitance (pF)
-40 -20
35
40
30
0
20 40 60 80
Temperature (ºC)
100 120 140
20
150
toffdly
tondly
10000
0
2000
4000
6000
8000
Load Capacitance (pF)
Propagation Delay vs. Input Voltage
(VIN=5V, VCC=12V, f=1kHz, CL=5.4nF)
180
160
tondly
140
120
100
80
toffdly
60
40
20
30
Input Threshold Voltage
vs. Temperature
(VCC=18V, CL=2.5nF)
50
toffdly
45
40
tondly
35
30
2
35
10000
Propagation Delay
vs. Temperature
(VCC=18V, f=1kHz, CL=5.4nF)
55
0
10
15
20
25
Supply Voltage (V)
4
6
8
Input Voltage (V)
10
-40 -20
12
Input Threshold vs. Supply Voltage
0
20 40 60 80
Temperature (ºC)
100 120 140
Enable Threshold vs. Supply Voltage
3.5
25
2.7
2.6
2.5
Min VIH
2.4
2.3
2.2
2.1
Max VIL
2.0
3.0
Enable Threshold (V)
Input Threshold (V)
Input Threshold Voltage (V)
30
Propagation Delay (ns)
Propagation Delay vs. Supply Voltage
(VIN=0-5V, f=1kHz, CL=5.4nF)
Propagation Delay (ns)
Propagation Delay (ns)
2000
0
Min VIH
2.5
Max VIL
2.0
1.5
1.0
1.9
-40 -20
R06
6
0
0
2.8
tf
7
10
0
5
8
VCC=4.5V
VCC=8V
VCC=12V
VCC=18V
VCC=25V
VCC=30V
VCC=35V
50
10
0
tr
9
60
60
50
10
Fall Time vs. Load Capacitance
Rise Time vs. Load Capacitance
100
Rise and Fall Times vs. Temperature
(VIN=0-5V, VCC=18V, f=10kHz, CL=2.5nF)
5
0
70
200
11
50
Fall Time (ns)
Rise Time (ns)
Fall Time vs. Supply Voltage
(Input=0-5V, f=10kHz, TA=25ºC)
Rise & Fall Times (ns)
70
0
20 40 60 80
Temperature (ºC)
100 120 140
20
Min VENH
15
Max VENL
10
5
0
0
5
10
15
20
25
Supply Voltage (V)
www.ixysic.com
30
35
0
5
10
15
20
25
Supply Voltage (V)
30
35
7
IXD_609
INTEGRATED CIRCUITS DIVISION
300
200
100
0
1000
150
100
50
150
100
50
0
1000
10000
10000
Load Capacitance (pF)
Supply Current vs. Frequency
(VCC=18V)
Supply Current vs. Frequency
(VCC=12V)
Supply Current vs. Frequency
(VCC=8V)
1000
1
1000
CL=10nF
CL=5.4nF
CL=1.5nF
100
10
1
10
100
1000
Frequency (kHz)
10000
1
10
100
1000
Frequency (kHz)
1.0
0.8
0.6
0.4
0.2
VIN=0V & 18V
0
1
0.1
20 40 60 80
Temperature (ºC)
10000
1
10
100
1000
Frequency (kHz)
10000
0.60
0.55
0.50
0.45
0.40
0.35
-40 -20
100 120 140
Output Source Current
vs. Supply Voltage
(f=422Hz, CL=66nF)
-25
-20
-15
-10
-5
0
20 40 60 80
Temperature (ºC)
100 120 140
Output Sink Current
vs. Supply Voltage
(f=422Hz, CL=66nF)
30
Output Sink Current (A)
-30
Output Source Current (A)
0.65
VIN=3.5V
VIN=5V
VIN=10V
1.2
Supply Current (mA)
Supply Current (mA)
1.4
-40 -20
10
Dynamic Supply Current
vs. Temperature
(VIN=5V, VCC=18V, f=1kHz, CL=1.5nF)
Quiescent Supply Current
vs. Temperature
0.0
CL=10nF
CL=5.4nF
CL=1.5nF
100
0.01
0.1
0.1
25
20
15
10
5
0
0
0
8
f=2MHz
f=1MHz
f=500kHz
f=100kHz
f=50kHz
f=10kHz
f=1kHz
Load Capacitance (pF)
10
1
Supply Current vs. Load Capacitance
(VCC=8V)
Load Capacitance (pF)
CL=10nF
CL=5.4nF
CL=1.5nF
100
200
0
1000
10000
Supply Current (mA)
Supply Current (mA)
1000
200
f=2MHz
f=1MHz
f=500kHz
f=100kHz
f=50kHz
f=10kHz
f=1kHz
250
Supply Current (mA)
400
Supply Current vs. Load Capacitance
(VCC=12V)
Supply Current (mA)
f=2MHz
f=1MHz
f=500kHz
f=100kHz
f=50kHz
f=10kHz
f=1kHz
300
Supply Current (mA)
Supply Current (mA)
500
Supply Current vs. Load Capacitance
(VCC=18V)
5
10
15
20
25
Supply Voltage (V)
30
35
0
www.ixysic.com
5
10
15
20
25
Supply Voltage (V)
30
35
R06
IXD_609
INTEGRATED CIRCUITS DIVISION
Output Source Current
vs. Temperature
(VCC=18V, f=422Hz, CL=66nF)
14.0
Output Sink Current (A)
Output Source Current (A)
-12.0
-11.5
-11.0
-10.5
-10.0
-9.5
-9.0
-40 -20
13.0
12.5
12.0
11.5
11.0
10.5
100 120 140
-40 -20
1.0
0.5
0
20 40 60 80
Temperature (ºC)
100 120 140
Low State Output Resistance
vs. Supply Voltage
(IOUT= +10mA )
1.1
Output Resistance (Ω)
Output Resistance (Ω)
20 40 60 80
Temperature (ºC)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.0
0
R06
13.5
10.0
0
High State Output Resistance
vs. Supply Voltage
(IOUT= -10mA)
1.5
Output Sink Current
vs. Temperature
(VCC=18V, f=422Hz, CL=66nF)
5
10
15
20
25
Supply Voltage (V)
30
35
0
www.ixysic.com
5
10
15
20
25
Supply Voltage (V)
30
35
9
IXD_609
INTEGRATED CIRCUITS DIVISION
5 Manufacturing Information
5.1 Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the
latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee
proper operation of our devices when handled according to the limitations and information in that standard as well as
to any limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to
the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
IXD_609 All Versions
MSL 1
5.2 ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard
JESD-625.
5.3 Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of
J-STD-020 must be observed.
10
Device
Maximum Temperature x Time
Maximum Reflow Cycles
IXD_609CI
IXD_609YI
IXD_609PI
IXD_609SI / IXD_609SIA / IXD_609D2
245°C for 30 seconds
245°C for 30 seconds
250°C for 30 seconds
260°C for 30 seconds
3
3
www.ixysic.com
R06
IXD_609
INTEGRATED CIRCUITS DIVISION
5.4 Mechanical Dimensions
5.4.1 SIA (8-Pin SOIC)
1.270 REF
(0.050)
Pin 8
PCB Land Pattern
0.60
(0.024)
0.762 ± 0.254
(0.030 ± 0.010)
3.937 ± 0.254
(0.155 ± 0.010)
5.994 ± 0.254
(0.236 ± 0.010)
1.55
(0.061)
5.40
(0.213)
Pin 1
0.406 ± 0.076
(0.016 ± 0.003)
1.346 ± 0.076
(0.053 ± 0.003)
4.928 ± 0.254
(0.194 ± 0.010)
1.27
(0.050)
0.559 ± 0.254
(0.022 ± 0.010)
Dimensions
mm
(inches)
0.051 MIN - 0.254 MAX
(0.002 MIN - 0.010 MAX)
5.4.2 SI (8-Pin Power SOIC with Exposed Metal Back)
3.80
(0.150)
0.762 ± 0.254
(0.030 ± 0.010)
3.937 ± 0.254
(0.155 ± 0.010)
5.994 ± 0.254
(0.236 ± 0.010)
5.40
2.75
(0.209) (0.108)
1.55
(0.061)
Pin 1
0.406 ± 0.076
(0.016 ± 0.003)
1.27
(0.050)
1.270 REF
(0.050)
4.928 ± 0.254
(0.194 ± 0.010)
0.60
(0.024)
Recommended PCB Land Pattern
1.346 ± 0.076
(0.053 ± 0.003)
2.540 ± 0.254
(0.100 ± 0.010)
7º
0.051 MIN - 0.254 MAX
(0.002 MIN - 0.010 MAX)
3.556 ± 0.254
(0.140 ±0.010)
Dimensions
mm
(inches)
Note: The exposed metal pad on the back of the SI package should be connected to GND. It is not suitable for
carrying current.
R06
www.ixysic.com
11
IXD_609
INTEGRATED CIRCUITS DIVISION
5.4.3 Tape & Reel Information for SI and SIA Packages
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
W=12.00
(0.472)
B0=5.30
(0.209)
A0=6.50
(0.256)
K0= 2.10
(0.083)
P=8.00
(0.315)
Dimensions
mm
(inches)
User Direction of Feed
Embossed Carrier
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Embossment
5.4.4 YI (5-Pin TO-263)
14.605 / 15.875
(0.575 / 0.625)
1.143 / 1.651
(0.045 / 0.065)
1.143 / 1.397
(0.045 / 0.055)
9.652 / 10.312
(0.380 / 0.406)
4.318 / 4.597
(0.170 / 0.181)
Recommended PCB Pattern
10.40
(0.409)
8.636 / 9.144
(0.340 / 0.360)
3.65
(0.144)
1 2 3 4 5
6.35
(0.250)
3.95
(0.156)
0º - 8º
1.70 BSC
(0.067 BSC)
0.737 / 0.889
(0.029 / 0.035)
9.30
(0.366)
1.70
(0.067)
2.286 / 2.794
(0.090 / 0.110)
1.00
(0.039)
6.223 MIN
(0.245 MIN)
0.000 / 0.305
(0.000 / 0.012)
6.858 MIN
(0.270 MIN)
DIMENSIONS
mm MIN / mm MAX
(inches MIN / inches / MAX)
6
NOTES:
1. All metal surfaces are solder-plated except trimmed area.
2. No. 3 lead is connected to No. 6 lead (bottom heat sink) internally.
12
www.ixysic.com
R06
IXD_609
INTEGRATED CIRCUITS DIVISION
5.4.5 PI (8-Pin DIP)
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
8-0.800 DIA.
(8-0.031 DIA.)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
3.302 ± 0.051
(0.130 ± 0.002)
7.239 TYP.
(0.285)
4.064 TYP
(0.160)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
0.254 ± 0.0127
(0.010 ± 0.0005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
5.4.6 CI (5-Pin TO-220)
1.14 / 1.40
(0.045 / 0.055)
4.32 / 4.83
(0.170 / 0.190)
9.91 / 10.54
(0.390 / 0.415)
14.73 / 15.75
(0.580 / 0.620)
11.94 / 12.95
(0.470 / 0.510)
7.823
(0.308)
12.387
(0.487)
8.64 / 9.40
(0.340 / 0.370)
6.299
(0.248)
3
1 2 3 4 5
6.502
(0.256)
25.27 / 26.54
(0.995 / 1.045)
0.64 / 1.02
(0.025 / 0.040)
DIMENSIONS
mm MIN / mm MAX
(inches MIN / inches / MAX)
1.70 BSC
(0.067 BSC)
0.38 / 0.64
(0.015 / 0.025)
2.29 / 2.92
(0.090 / 0.115)
NOTES:
1. This drawing will meet all dimensions requirement of
JEDEC outlines TS-001AA and 5-lead version TO-220AB.
2. Mounting hole diameter: 3.53 / 3.96 (0.139 / 0.156)
3. The metal tab is connected to pin 3 (GND).
R06
7.620
(0.300)
12.70 / 14.73
(0.50 / 0.58)
Recommended Hole Pattern
Finished Hole Diameter = 1.45mm (0.057 in.)
1.70mm (0.067 in.)
www.ixysic.com
13
IXD_609
INTEGRATED CIRCUITS DIVISION
5.4.7 D2 (8-Pin DFN)
5.00 BSC
(0.197 BSC)
0.80 / 1.00
(0.031 / 0.039)
0.20 REF
(0.008 REF)
Pin 1
4.00 BSC
(0.157 BSC)
0.35 x 45º
(0.014 x 45º)
0.95
(0.037)
4.50
(0.177)
3.10
(0.122)
0.45
(0.018)
0.10
(0.004)
2.60
(0.102)
1.20
(0.047)
0.74 / 0.83
(0.029 / 0.033)
Recommended PCB Land Pattern
3.03 / 3.10
(0.119 / 0.122)
Dimensions
mm MIN / mm MAX
(inches MIN / inches MAX)
0.30 / 0.45
(0.012 / 0.018)
0.95 BSC
(0.037 BSC)
Pin 1
Pin 8
2.53 / 2.60
(0.100 / 0.102)
0.35 / 0.45 x 45º
(0.014 / 0.018 x 45º)
NOTE:
The exposed metal pad on the back of the D2 package should
be connected to GND. Pad is not suitable for carrying current.
5.4.8 Tape & Reel Information for D2 Package
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
∅1.55 ± 0.05
4.00 ± 0.10 See Note #2
2.00 ± 0.05
R0.75 TYP
1.75 ± 0.10
(0.05)
5º MAX
5.50 ± 0.05
(0.05)
B0=5.40 ± 0.10
12.00 ± 0.30
Embossed Carrier
K0=1.90 ± 0.10
8.00 ± 0.10
5º MAX
A0=4.25 ± 0.10
Embossment
0.30 ± 0.05
∅1.50 (MIN)
NOTES:
1. A0 & B0 measured at 0.3mm above base of pocket.
2. 10 pitches cumulative tol. ± 0.2mm
3. ( ) Reference dimensions only.
4. Unless otherwise specified, all dimensions in millimeters.
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-IXD_609-R06
©Copyright 2014, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
9/25/2014
14
www.ixysic.com
R06
Similar pages