Micro Electronics JAN7905T Negative fixed voltage regulator Datasheet

SG7900A/SG7900 SERIES
SG7900A/SG7900
NEGATIVE FIXED VOLTAGE REGULATOR
DESCRIPTION
FEATURES
The SG7900A/SG7900 series of negative regulators offer self-contained,
fixed-voltage capability with up to 1.5A of load current. With a variety of
output voltages and four package options this regulator series is an
optimum complement to the SG7800A/SG7800, SG140 line of three
terminal regulators.
•
•
•
•
•
•
•
•
These units feature a unique band gap reference which allows the
SG7900A series to be specified with an output voltage tolerance of ±1.5%.
The SG7900A versions also offer much improved line regulation characteristics.
All protective features of thermal shutdown, current limiting, and safe-area
control have been designed into these units and since these regulators
require only a single output capacitor (SG7900 series) or a capacitor and
5mA minimum load (SG120 series) for satisfactory performance, ease of
application is assured.
Although designed as fixed-voltage regulators, the output voltage can be
increased through the use of a simple voltage divider. The low quiescent
drain current of the device insures good regulation when this method is
used, especially for the SG120 series.
Output voltage set internally to ±1.5% on SG7900A
Output current to 1.5A
Excellent line and load regulation
Foldback current limiting
Thermal overload protection
Voltages available: -5V, -12V, -15V
Contact factory for other voltage options
Available in surface mount package
HIGH RELIABILITY FEATURES
- SG7900A/SG7900
♦ Available to MIL-STD - 883
♦ MIL-M38510/11501BXA - JAN7905T
♦ MIL-M38510/11505BYA - JAN7905K
♦ MIL-M38510/11502BXA - JAN7912T
♦ MIL-M38510/11506BYA - JAN7912K
♦ MIL-M38510/11503BXA - JAN7915T
♦ MIL-M38510/11507BYA - JAN7915K
♦ LMI level "S" processing available
These devices are available in hermetically sealed TO-257, TO-3, TO-39
and LCC package.
SCHEMATIC DIAGRAM
**
**
For normal
operation the (VOS)
Sense Pin must be
externally
connected to the
load.
LINFINITY
05/01 Rev 1.5
Copyright  1999
1
Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞FAX: (714) 893-2570
SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
ABSOLUTE MAXIMUM RATINGS (Note 1)
Device
Output Voltage
-5V
-12V
-15V
Input Voltage
-35V
-35V
-40V
Operating Junction Temperature
Hermetic (K, T, IG & L - Packages) ........................
Input Voltage Differential
(Output shorted to ground)
35V
35V
35V
Storage Temperature Range .......................... -65°C to 150°C
Lead Temperature (Soldering, 10 Seconds) ................. 300°C
150°C
Note 1. Values beyond which damage may occur.
THERMAL DATA
K Package:
Thermal Resistance-Junction to Case, θJC ................. 3.0°C/W
Thermal Resistance-Junction to Ambient, θJA ............... 35°C/W
T Package:
Thermal Resistance-Junction to Case, θJC .................. 15°C/W
Thermal Resistance-Junction to Ambient, θJA ............ 120°C/W
IG Package:
Thermal Resistance-Junction to Case, θJC ................. 3.5°C/W
Thermal Resistance-Junction to Ambient, θJA .............. 42°C/W
L Package:
Thermal Resistance-Junction to Case, θJC .................. 35°C/W
Thermal Resistance-Junction to Ambient, θJA ............ 120°C/W
RECOMMENDED OPERATING CONDITIONS
Note A. Junction Temperature Calculation: TJ = TA + (PD x θJA).
Note B. The above numbers for θJC are maximums for the limiting thermal
resistance of the package in a standard mounting configuration.
The θJA numbers are meant to be guidelines for the thermal
performance of the device/pc-board system. All of the above
assume no ambient airflow.
(Note 2)
Operating Junction Temperature Range:
SG7900A/7900 ............................................. -55°C to 150°C
Note 2. Range over which the device is functional.
CHARACTERISTIC CURVES
FIGURE 1.
MAXIMUM AVERAGE POWER DISSIPATION
FIGURE 2.
QUIESCENT CURRENT VS. LOAD
LINFINITY
05/01 Rev 1.5
Copyright  1999
FIGURE 3.
TEMPERATURE COEFFICIENT
2
Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞FAX: (714) 893-2570
SG7900A/SG7900 SERIES
CHARACTERISTIC CURVES
NEGATIVE REGULATOR
(continued)
FIGURE 4.
SHORTCIRCUIT CURRENT VS. VIN
FIGURE 5.
QUIESCENT CURRENT VS. VIN
FIGURE 7.
DROPOUT CHARACTERISTICS
FIGURE 6.
SHORT CIRCUIT CURRENT VS. VIN
FIGURE 8.
RIPPLE REJECTION VS. FREQUENCY
APPLICATIONS
FIGURE 10 - CIRCUIT FOR INCREASING OUTPUT VOLTAGE
FIGURE 9 - FIXED OUTPUT REGULATOR
NOTE: C3 optional for improved transient response and ripple rejec
NOTE: 1. C1 is required only if regulator is separated from rectifier filter.
2. Both C1 and C2 should be low E.S.R. types such as solid
tantalum. If aluminum electrolytics are used, at least 10 times
values shown should be selected.
3. If large output capacities are used, the regulators must be
protected from momentary input shorts. A high current diode
VOUT = V (REGULATOR)
R2 =
LINFINITY
05/01 Rev 1.5
Copyright  1999
R 1 + R2
R1
3
V(REG)
15mA
Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞FAX: (714) 893-2570
SG7900A/SG7900 SERIES
-5.0V NEGATIVE REGULATOR
ELECTRICAL SPECIFICATIONS
(Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7905A/SG7905 with -55°C ≤ TA ≤ 150°C,
VIN = -10V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1.0µF. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7905A/SG7905
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Total Output Voltage
Tolerance
Quiescent Current
Quiescent Current Change
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
TJ = 25°C
VIN = -7.5V to -25V, TJ = 25°C
VIN = -8V to -12V, TJ = 25°C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C
IO = 250mA to 750mA, TJ = 25°C
T - Pkg: IO = 5mA to 500mA, TJ = 25°C
VIN = -8V to -20V
Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W
T - Pkg: IO = 5mA to 500mA, P ≤ 2W
Over Temperature Range
TJ = 25°C
with Line: VIN = -8V to -25V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
∆VO = 100mV, TJ = 25°C
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25°C
T - Pkg: TJ = 25°C
Power Pkgs: VIN = -35V, TJ = 25°C
T - Pkg: VIN = -35V, TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
IO = 5mA
SG7905A
SG7905
Min. Typ. Max. Min. Typ. Max.
-4.92 -5.00 -5.08 -4.8 -5.0 -5.2
5
25
50
3
3
12
1
25
15
75
100
15
15
25
15
25
5
30
5
100
-4.85 -5.00 -5.15 -4.70 -5.00 -5.30
-4.85 -5.00 -5.15 -4.70 -5.00 -5.30
2.5
2.5
2.0
2.0
1.3
1.3
0.5
0.5
0.5
0.5
1.1
1.5
0.5
2.3
3.3
1.4
1.2
0.6
54
1.1
2.3
3.3
1.4
1.2
0.6
25
20
175
80
1.5
0.5
54
25
20
175
80
Units
V
mV
mV
mV
mV
mV
V
V
mA
mA
mA
mA
mA
V
A
A
A
A
dB
µV/V
mV
°C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
LINFINITY
05/01 Rev 1.5
Copyright  1999
4
Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞FAX: (714) 893-2570
SG7900A/SG7900 SERIES
-12V NEGATIVE REGULATOR
ELECTRICAL SPECIFICATIONS
(Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7912A/SG7912 with -55°C ≤ TA ≤ 150°C,
VIN = -19V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1.0µF. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7912A/SG7912
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Total Output Voltage
Tolerance
Quiescent Current
Quiescent Current Change
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
TJ = 25°C
VIN = -14.5V to -30V, TJ = 25°C
VIN = -16V to -22V, TJ = 25°C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C
IO = 250mA to 750mA, TJ = 25°C
T - Pkg: IO = 5mA to 500mA, TJ = 25°C
VIN = -14.5V to -27V
Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W
T - Pkg: IO = 5mA to 500mA, P ≤ 2W
Over Temperature Range
TJ = 25°C
with Line: VIN = -14.5V to -30V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
∆VO = 100mV, TJ = 25°C
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25°C
T - Pkg: TJ = 25°C
Power Pkgs: VIN = -35V, TJ = 25°C
T - Pkg: VIN = -35V, TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
IO = 5mA
SG7912A
SG7912
Min. Typ. Max. Min. Typ. Max.
-11.8 -12.0 -12.2 -11.5 -12.0 -12.5
4
60
10
120
30
3
3
60
12
20
90
120
40
4
10
60
10
10
40
240
-11.7 -12.0 -12.3 -11.4 -12.0 -12.6
-11.7 -12.0 -12.3 -11.4 -12.0 -12.6
4
4
3
3
1.0
1.0
0.5
0.5
0.5
0.5
1.1
1.5
0.5
2.3
3.3
1.4
1.2
0.6
1.1
2.3
3.3
1.4
0.2
0.6
25
60
175
80
1.5
0.5
54
54
25
60
175
80
Units
V
mV
mV
mV
mV
mV
V
V
mA
mA
mA
mA
mA
V
A
A
A
A
dB
µV/V
mV
°C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
LINFINITY
05/01 Rev 1.5
Copyright  1999
5
Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞FAX: (714) 893-2570
SG7900A/SG7900 SERIES
-15V NEGATIVE REGULATOR
ELECTRICAL SPECIFICATIONS
(Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7915A/SG7915 with -55°C ≤ TA ≤ 150°C,
VIN = -23V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2µF, and COUT = 1.0µF. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7915A/SG7915
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Total Output Voltage
Tolerance
Quiescent Current
Quiescent Current Change
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
TJ = 25°C
VIN = -17.5V to -30V, TJ = 25°C
VIN = -20V to -25V, TJ = 25°C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C
IO = 250mA to 750mA, TJ = 25°C
T - Pkg: IO = 5mA to 500mA, TJ = 25°C
VIN = -18.5V to -30V
Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W
T - Pkg: IO = 5mA to 500mA, P ≤ 2W
Over Temperature Range
TJ = 25°C
with Line: VIN = -18.5V to -30V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
∆VO = 100mV, TJ = 25°C
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25°C
T - Pkg: TJ = 25°C
Power Pkgs: VIN = -35V, TJ = 25°C
T - Pkg: VIN = -35V, TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
IO = 5mA
SG7915A
SG7915
Min. Typ. Max. Min. Typ. Max.
-14.8 -15.0 -15.2 -14.4 -15.0 -15.6
5
75
11
150
3
40
3
75
30
100
12
150
4
50
4
75
10
50
10
240
-14.6 -15.0 -15.4 -14.25 -15.00 -15.75
-14.6 -15.0 -15.4 -14.25 -15.00 -15.75
4
4
3
3
1.0
1.0
0.5
0.5
0.5
0.5
1.1
1.5
0.5
2.3
3.3
1.4
1.2
0.6
54
1.1
2.3
3.3
1.4
1.2
0.6
25
60
175
80
1.5
0.5
54
25
60
175
80
Units
V
mV
mV
mV
mV
mV
V
V
mA
mA
mA
mA
mA
V
A
A
A
A
dB
µV/V
mV
°C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
LINFINITY
05/01 Rev 1.5
Copyright  1999
6
Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞FAX: (714) 893-2570
SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
CONNECTION DIAGRAMS & ORDERING INFORMATION
Package
3-TERMINAL TO-3
METAL CAN
K-PACKAGE
3-PIN TO-39 METAL CAN
T-PACKAGE
3-PIN HERMETIC TO-257
IG-PACKAGE (Isolated)
20-PIN CERAMIC
LEADLESS CHIP CARRIER
L- PACKAGE
Note 1.
2.
3.
4.
5.
6.
Part No.
(See Notes Below)
Ambient
Temperature Range
SG79XXAK/883B
SG7905AK/DESC
SG7912AK/DESC
SG7915AK/DESC
SG79XXAK
SG79XXK/883B
JAN7905K
JAN7912K
JAN7915K
SG79XXK
SG79XXK
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
0°C to 125°C
SG79XXAT/883B
SG7905AT/DESC
SG7912AT/DESC
SG7915AT/DESC
SG79XXAT
SG79XXT/883B
JAN7905T
JAN7912T
JAN7915T
SG79XXT
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
SG79XXAIG/883B
SG7905AIG/DESC
SG7912AIG/DESC
SG7915AIG/DESC
SG79XXAIG
SG79XXIG/883B
SG79XXIG
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
SG79XXL/883B
SG79XXL
SG7905AL/DESC
SG7912AL/DESC
SG7915AL/DESC
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
-55°C to 125°C
Connection Diagram
GROUND
1
2
CASE IS VIN
VOUT
GROUND
1
VOUT
2
3
VIN
CASE IS VIN
VOUT
VIN
GROUND
(See Notes 5 & 6)
1. N.C.
2. VIN
3. N.C.
4. VO
5. VO
6. N.C.
7. VO SENSE
8. N.C.
9. N.C.
10. N.C.
3
2
1
20 19
4
18
5
17
6
16
7
15
8
14
9
10 11 12 13
11. N.C.
12. N.C.
13. N.C.
14. N.C.
15. GND
16. N.C.
17. GND
18. N.C.
19. N.C.
20. VIN
Contact factory for JAN and DESC product availability.
All parts are viewed from the top.
"XX" to be replaced by output voltage of specific fixed regulator.
Some products will be available in hermetic flat pack (F). Consult factory for price and availability.
Both inputs and outputs must be externally connected together at the device terminals.
For normal operation, the VO SENSE pin must be externally connected to the load.
LINFINITY
05/01 Rev 1.5
Copyright  1999
7
Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
(714) 898-8121 ∞FAX: (714) 893-2570
Similar pages