MIC JAR701 Jumbo button automotive rectifier Datasheet

JUMBO BUTTON AUTOMOTIVE RECTIFIER
JAR7005 THRU JAR706
VOLTAGE RANGE
50 to 600 Volts
CURRENT
70.0 Amperes
JAR
FEATURES
•
•
•
•
.406(10.3)DIA
.394(10.0)TYP
Low Leakage
Low forward voltage drop
High current capability
High forward surge current capacity
.275(7.0)
.169(6.7)
.185(4.7)
.169(4.3)
.245(6.2)
.230(5.9)
MECHANICAL DATA
•
•
•
•
•
•
.228(5.8)
.220(5.6)
Case: transfer molded plastic
Epoxy: UL94V-0 rate flame retardant
Lead: Plated slug , solderable per MIL-STD-202E
method 208C
Polarity: Color ring denotes cathode end
Mounting Position: any
Weight: 0.085 ounces, 2.40 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60HZ, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
JAR7005
JAR701
JAR702
JAR704
JAR706
UNIT
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
Volts
Maximum Average Forward Rectified Current,
At Tc=110℃
IO
70.0
Amps
IFSM
700
Amps
VF
1.05
Volts
Peak Forward Surge Current
3.3mS single half sine wave superimposed on
Rated load (JEDEC method)
Maximum instantaneous Forward Voltage at 100A
Maximum DC Reverse Current at Rated TA=25℃
5.0
IR
DC Blocking Voltage per element TA=100℃
Typical Thermal Resistance
RθJC
Operating and Storage Temperature Range
Yellow
Enough heatsink must be considered in application.
E-mail: [email protected]
℃
(-65 to +175)
Red
Notes:
1.
℃/W
0.8
TJ,TSTG
Polarity and voltage demotion color band
UA
400
Web Site: www.cnmic.com
Silver
Orange
Green
JUMBO BUTTON AUTOMOTIVE RECTIFIER
JAR7005 THRU JAR706
VOLTAGE RANGE
50 to 600 Volts
CURRENT
70.0 Amperes
RATINGS AND CHARACTERISTIC CURVES JAR7005 THRU JAR706
F1G.1 TYPICAL FORWARD CURRENT
DERATING GURVE
F1G.2 MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
800
PEAK FORWARD SURGE
CURRENT,(A)
AVERAGE FORWARD CURRENT,
(A)
70
60
50
40
30
Single Phase
Half Wave 60Hz
20
Resistive or
8.3ms Single Half Sine-Wave
600
(JEDEC Method) Tj=Tj max
500
400
300
200
Inductive Load
10
700
1 Cycle
0.375″(9.5mm) Lead Length
100
1
0
0
25
50
75
110
100
125
150
175
2
4
6
8 10
20
40
60
100
NUMBER OF CYCLES AT 60 Hz
CASE TEMPERATURE, (℃)
F1G.3 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
F1G.4 FORWARD ROWER DISSIPATION
AVERAGE POWER DISSIPATION
(W)
INSTANTANEOUS FORWARD CURRENT,
(A)
1000
100
10
T1=25℃
PULSE WIDTH=300μS
1%DUTY CYCLE
60
40
SQUARE WAVE
20
0
0
10
0.8
1.0
1.2
1.4
1.6
50
70
AVERAGE FORWARD CURRENT, (A)
1.0
0.1
0.6
30
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE,(V)
E-mail: [email protected]
Web Site: www.cnmic.com
90
Similar pages