MA-COM JH-139PIN Quadrature hybrid, 250 - 500 mhz Datasheet

JH- / JHS-139
Quadrature Hybrid,
250 - 500 MHz
Rev. V3
Features
FP-2 (JH-139)
•
•
•
•
•
Octave Bandwidth
Low VSWR: 1.1:1 Typical
High Isolation: 30 dB Typical
Impedance: 50 Ohms Nominal
Input Power: 4 Watts Max.@ 25°C, Derated to 1
Watt @ 85oC
• MIL-STD-202 Screening Available
Description
3 dB Hybrids are ideal for dividing a signal into two
signals of equal amplitude and a constant 90o or
180o phase differential and for Quadrature
combining or performing summation/differential
combining.
SF-1 (JHS-139)
Pin Configuration (JH-139)
Pin No.
Function
Pin No.
Function
1
A
5
D
2
GND
6
GND
3
GND
7
GND
4
B
8
C
Pin Configuration (JHS-139)
Pin No.
Function
Pin No.
Function
1
A
3
D
2
B
4
C
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
JH- / JHS-139
Quadrature Hybrid,
250 - 500 MHz
Rev. V3
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Less Coupling
250 - 500 MHz
dB
—
—
0.5
Isolation
—
250 - 500 MHz
dB
15
—
—
Amplitude Balance
—
250 - 500 MHz
dB
—
—
1.0
VSWR
—
250 - 500 MHz
Ratio
—
—
1.5:1
Deviation from
Quadrature
—
250 - 500 MHz
°
—
—
4
Insertion Loss
2
1. All specifications apply with 50 ohm source and load impedance.
2. Average of coupled output less 3 dB.
This product contains elements protected by United States Patent Number 3,484,724
Phasing Diagram
OUT
A
Typical Performance Curves
B
C
D
ISO
0°
-90°
-90°
0°
IN
A
B
ISO
C
0°
90°
D
-90°
0°
ISO
ISO
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
JH- / JHS-139
Quadrature Hybrid,
250 - 500 MHz
Rev. V3
Typical Performance Curves
Ordering Information
Part Number
Package
JH-139 PIN
FP-2
JHS-139 PIN
SF-1
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages