TI JM10405BEA Dual differential line driver Datasheet

SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
D
D
D
D
D
D
D
D
D
D
D
Choice of Open-Collector, Open-Emitter, or
3-State Outputs
High-Impedance Output State for
Party-Line Applications
Single-Ended or Differential AND/NAND
Outputs
Single 5-V Supply
Dual Channel Operation
Compatible With TTL
Short-Circuit Protection
High-Current Outputs
Common and Individual Output Controls
Clamp Diodes at Inputs and Outputs
Easily Adaptable to SN55114 and SN75114
Applications
Designed for Use With SN55115 and
SN75115
description
SN55113 . . . J OR W PACKAGE
SN75113 . . . N PACKAGE
(TOP VIEW)
1ZP
1ZS
1YS
1YP
1A
1B
1C
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
2ZP
2ZS
2YS
2YP
2A
2C
CC
SN55113 . . . FK PACKAGE
(TOP VIEW)
1ZS
1ZP
NC
VCC
2ZP
D
1YS
1YP
NC
1A
1B
4
3 2 1 20 19
18
5
17
6
16
7
15
2ZS
2YS
NC
2YP
2A
1C
GND
NC
CC
2C
The SN55113 and SN75113 dual differential line
14
8
drivers with 3-state outputs are designed to
9 10 11 12 13
provide all the features of the SN55114 and
SN75114 line drivers with the added feature of
driver output controls. Individual controls are
provided for each output pair, as well as a
NC – No internal connection
common control for both output pairs. If any output
is low, the associated output is in a high-impedance state and the output can neither drive nor load the bus. This
permits many devices to be connected together on the same transmission line for party-line applications.
The output stages are similar to TTL totem-pole outputs, but with the sink outputs, YS and ZS, and the
corresponding active pullup terminals, YP and ZP, available on adjacent package pins.
The SN55113 is characterized for operation over the full military temperature range of – 55°C to 125°C. The
SN75113 is characterized for operation over the temperature range of 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
FUNCTION TABLE
INPUTS
OUTPUTS
DATA
OUTPUT
C
CONTROL
CC
A
B†
AND
Y
NAND
Z
L
X
X
X
Z
Z
X
L
X
X
Z
Z
H
H
L
X
L
H
H
H
X
L
L
H
H
H
H
H
H
L
H = high level, L = low level, X = irrelevant,
Z = high impedance (off)
† B input and 4th line of function table are applicable only to
driver number 1.
logic symbol‡
1C
CC
2C
1A
1B
7
logic diagram (positive logic)
1C
&
EN1
9
10
5
CC
&
EN2
&
1
1
6
1
1
2
2A
11
2
2
2
4
3
1
2
12
13
15
14
2C
1YP
1YS
1A
1ZP
1B
7
9
10
5
6
1ZS
2A
2ZP
2
12
15
14
2ZS
POST OFFICE BOX 655303
1
1YP
1YS
1ZP
1ZS
2YP
2YS
11
‡ This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Pin numbers shown are for the J, N, and W packages.
2
3
13
2YP
2YS
4
• DALLAS, TEXAS 75265
2ZP
2ZS
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
schematic
Input 1B Input 1A
5
6
16 V
CC
1 kΩ
600 Ω †
4 kΩ
V
V
†
600 Ω
9Ω
1 kΩ
To
Other
Driver
600 Ω
4 kΩ
4 kΩ
‡
AND 4
Pullup
1YP
900 Ω
900 Ω
†
AND
Sink 3
Output
1YS
100 Ω
333 Ω
90 Ω
5 kΩ
500 Ω
V
4 kΩ
Output 7
Control
1C
1.6 kΩ
100 Ω
90 Ω
†
5 kΩ
12
13
15
14
1 kΩ
100 Ω
NAND
Pullup
1ZP
NAND
2 Sink
Output
1ZS
500 Ω
100 Ω
Common Output 9
Control CC
10
Output Control 2C
11
Input 2A
9Ω
1
8
AND Pullup 2YP
AND Output 2YS
NAND Pullup 2ZP
NAND Output 2ZS
GND
V ... VCC bus
† These components are common to both drivers. Resistor values shown are nominal and in ohms.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Off-state voltage applied to open-collector outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Continuous total power dissipation (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: SN55113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
SN75113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: N package . . . . . . . . . . . . . . . . . . . . . 260°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package . . . . . . . . . . . . . . . . 300°C
‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 125°C
POWER RATING
FK
1375 mW
11.0 mW/°C
880 mW
275 mW
275 mW
J
1375 mW
11.0 mW/°C
880 mW
N
1150 mW
9.2 mW/°C
736 mW
N/A
W
1000 mW
8.0 mW/°C
640 mW
200 mW
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
recommended operating conditions
SN55113
Supply voltage, VCC
High-level input voltage, VIH
SN75113
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.75
5
5.25
2
V
2
Low-level input voltage, VIL
High-level output current, IOH
Low-level output current, IOL
Operating free-air temperature, TA
UNIT
– 55
V
0.8
0.8
V
– 40
– 40
mA
40
40
mA
70
°C
125
0
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
TEST CONDITIONS†
PARAMETER
VIK
Input clamp voltage
VCC = MIN,
II = – 12 mA
VOH
High-level
g
output
voltage
VCC = MIN,,
VIL = 0.8 V
VIH = 2 V,,
VOL
Low-level output
voltage
VCC = MIN,,
IOL = 40 mA
VIH = 2 V,,
VOK
Output clamp voltage
VCC = MAX,
IO = – 40 mA
Off-state
IO(
open-collector
collector output
ff) open
O(off)
current
IOZ
Off state
Off-state
(high-impedance-state)
output current
Input current
at maximum
input voltage
A, B, C
II
TA = 25°C
TA = 70°C
IIH
High-level
g
input current
A, B, C
IIL
Low-level
input current
A, B, C
IOS
ICC
TA = MAX
VI = 5
5.5
5V
VCC = MAX
MAX,
VI = 2
2.4
4V
VCC = MAX
MAX,
VI = 0
0.4
4V
Short-circuit
output current§
VCC = MAX
MAX,
VO = 0
0,
Supply
y current
(both drivers)
All inputs at 0 V, No load,
TA = 25°C
CC
CC
MIN
– 1.5
SN75113
TYP‡
MAX
– 0.9
2.4
3.4
2.4
3.4
2
3.0
2
3.0
VIL = 0.8 V,
VOH = 5.25
5 25 V
VCC = MAX
MAX,
CC
IOH = –10 mA
IOH = – 40 mA
VOH = 12 V
TA = 25°C,
SN55113
TYP‡
MAX
– 0.9
TA = 25°C
TA = 125°C
VCC = MAX
VCC = MAX,
O t t
Output
controls at
0.8 V
MIN
– 1.5
UNIT
V
V
0 23
0.23
04
0.4
0 23
0.23
04
0.4
V
–1.1
–1.5
–1.1
–1.5
V
1
10
1
10
200
µA
20
± 10
± 10
– 150
– 20
VO = 0.4 V
VO = 2.4 V
± 80
± 20
± 80
± 20
VO = VCC
80
20
1
1
2
2
40
40
80
80
– 1.6
– 1.6
– 3.2
– 3.2
VO = 0 to VCC
VO = 0
µA
mA
TA = 25°C
– 40
VCC = MAX
VCC = 7 V
– 90
– 120
47
65
– 40
– 90
– 120
65
47
65
85
65
85
µA
mA
mA
mA
† All parameters with the exception of off-state open-collector output current are measured with the active pullup connected to the sink output. For
conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at TA = 25°C and VCC = 5 V, with the exception of VCC at 7 V.
§ Only one output should be shorted at a time, and duration of the short-circuit should not exceed one second.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25°C
PARAMETER
SN55113
TEST CONDITIONS
MIN
SN75113
TYP
MAX
13
12
MIN
UNIT
TYP
MAX
20
13
30
ns
20
12
30
ns
tPLH
tPHL
Propagation delay time, low-to-high level output
tPZH
tPZL
Output enable time to high level
RL = 180 Ω, See Figure 2
7
15
7
20
ns
Output enable time to low level
RL = 250 Ω, See Figure 3
14
30
14
40
ns
tPHZ
tPLZ
Output disable time from high level
RL = 180 Ω, See Figure 2
10
20
10
30
ns
Output disable time from low level
RL = 250 Ω, See Figure 3
17
35
17
35
ns
See Figure 1
Propagation delay time, high-to-low-level output
PARAMETER MEASUREMENT INFORMATION
1 kΩ
5V
AND
Output
Input
CL = 30 pF
(see Note B)
Pulse
Generator
(see Note A)
NAND
Output
50 Ω
CL = 30 pF
(see Note B)
TEST CIRCUIT
≤ 5 ns
≤ 5 ns
90%
Input
3V
90%
1.5 V
1.5 V
10%
10%
tPHL
NAND
Output
1.5 V
VOH
1.5 V
VOL
tPLH
AND
Output
0V
tPLH
tPHL
1.5 V
VOH
1.5 V
VOL
VOLTAGE WAVEFORMS
NOTES: A. The pulse generator has the following characteristics: ZO = 50 Ω, PRR ≤ 500 kHz, tw = 100 ns.
B. CL includes probe and jig capacitance.
Figure 1. Test Circuit and Voltage Waveforms tPLH and tPHL
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
PARAMETER MEASUREMENT INFORMATION
Input
Pulse
Generator
(see Note A)
5V
50 Ω
AND
Output
CL = 30 pF
(see Note B)
NAND
Output
CL = 30 pF
(see Note B)
1 kΩ
5V
TEST CIRCUIT
≤ 5 ns
≤ 5 ns
90%
Input
3V
90%
1.5 V
1.5 V
10%
10%
0V
tPZH
VOH
Output
1.5 V
0.5 V
tPHZ
Voff ≈ 0 V
VOLTAGE WAVEFORMS
NOTES: A. The pulse generator has the following characteristics: ZO = 50 Ω, PRR ≤ 500 kHz, tw = 100 ns.
B. CL includes probe and jig capacitance.
Figure 2. Test Circuit and Voltage Waveforms tPZH and tPHZ
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
RL
180 Ω
Output
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
PARAMETER MEASUREMENT INFORMATION
Input
Pulse
Generator
(see Note A)
5V
50 Ω
5V
1 kΩ
CL = 30 pF
(see Note B)
NAND
Output
AND
Output
RL
250 Ω
Output
CL = 30 pF
(see Note B)
TEST CIRCUIT
≤ 5 ns
≤ 5 ns
90%
Input
1.5 V
3V
90%
1.5 V
10%
10%
0V
tPZL
tPLZ
5V
Output
1.5 V
0.5 V
VOL
VOLTAGE WAVEFORMS
NOTES: A. The pulse generator has the following characteristics: ZO = 50 Ω, PRR ≤ 500 kHz, tw = 100 ns.
B. CL includes probe and jig capacitance.
Figure 3. Test Circuit and Voltage Waveforms, tPZL and tPLZ
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
TYPICAL CHARACTERISTICS†
OUTPUT VOLTAGE
vs
DATA INPUT VOLTAGE
OUTPUT VOLTAGE
vs
DATA INPUT VOLTAGE
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
6
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
6
VCC = 5 V
No Load
No Load
TA = 25°C
ÁÁ
ÁÁ
ÁÁ
5
VO
VO – Output Voltage – V
VO
VO – Output Voltage – V
5
VCC = 5.5 V
4
VCC = 5 V
VCC = 4.5 V
3
ÁÁ
ÁÁ
2
1
0
4
3
TA = 25°C
TA = – 55°C
2
1
0
0
1
2
3
4
0
1
VI – Data Input Voltage – V
2
3
4
VI – Data Input Voltage – V
Figure 5
Figure 4
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
6
6
Load = 500 Ω to GND
TA = 25°C
VO
VO – Output Voltage – V
VCC = 5.5 V
4
VCC = 5 V
VCC = 4.5 V
3
ÁÁÁ
ÁÁÁ
ÁÁ
ÁÁ
2
Disabled
1
VCC = 5 V
Load = 500 Ω to GND
5
5
VO
VO – Output Voltage – V
TA = 125°C
High
TA = 125°C
4
3
TA = 25°C
TA = – 55°C
2
High
Disabled
1
0
0
0
1
2
3
4
VI – Input Voltage (Output Control) – V
0
1
2
3
4
VI – Input Voltage (Output Control) – V
Figure 6
Figure 7
† Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
TYPICAL CHARACTERISTICS†
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
VCC = 5.5 V
VCC = 5 V
5
VO
VO – Output Voltage – V
VCC = 4.5 V
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Load = 500 Ω to VCC
VCC = 5 V
5
4
3
ÁÁ
ÁÁ
ÁÁ
ÁÁ
2
Disabled
Low
1
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
6
Load = 500 Ω to VCC
TA = 25°C
VO
VO – Output Voltage – V
6
4
TA = 25°C
3
2
TA = 125°C
1
Disabled
Low
0
0
0
1
2
3
VI – Input Voltage (Output Control) – V
0
4
3
1
2
VI – Input Voltage (Output Control) – V
HIGH-LEVEL OUTPUT VOLTAGE
vs
OUTPUT CURRENT
OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
5
4
3.2
VCC = 4.5 V
TA = 25°C
VO – High-Level Output Voltage – V
3.6
4
Figure 9
Figure 8
VO
VO – Output Voltage – V
TA = – 55°C
VOH(IOH = – 10 mA)
2.8
2.4
2
VOH(IOH = – 40 mA)
ÁÁ
ÁÁ
1.6
1.2
0
–75 – 50
VCC = 5 V
3
2
VCC = 4.5 V
ÁÁ
ÁÁ
0.8
0.4
VCC = 5.5 V
4
VOL(IOL = 40 mA)
1
0
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
125
0
– 20
–100
– 40
– 60
– 80
IOH – Output Current – mA
–120
Figure 11
Figure 10
† Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
TYPICAL CHARACTERISTICS†
SUPPLY CURRENT
(BOTH DRIVERS)
vs
SUPPLY VOLTAGE
LOW-LEVEL OUTPUT VOLTAGE
vs
OUTPUT CURRENT
TA = 25°C
No Load
TA = 25°C
70
ICC
ICC – Supply Current – mA
0.5
VOL
VOL – Output Voltage – V
ÁÁÁÁ
ÁÁÁÁ
80
0.6
VCC = 4.5 V
0.4
0.3
VCC = 5.5 V
ÁÁÁ
ÁÁÁ
60
Inputs Grounded
50
Inputs Open
40
ÁÁ
ÁÁ
0.2
0.1
30
20
10
0
0
20
40
50
80
100
0
120
0
1
2
3
4
5
6
VCC – Supply Voltage – V
IOL – Output Current – mA
50
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
100
VCC = 5 V
Inputs Grounded
No Load
90
80
ICC
ICC – Supply Current – mA
ICC
ICC – Supply Current – mA
52
40
100
SUPPLY CURRENT
(BOTH DRIVERS)
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
(BOTH DRIVERS)
vs
OUTPUT CURRENT
54
8
Figure 13
Figure 12
56
7
48
46
44
ÁÁÁ
ÁÁÁ
70
60
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
VCC = 5 V
RL = ∞
CL = 30 pF
Inputs: 3-V Square Wave
TA = 25°C
50
40
ÁÁ
ÁÁ
42
40
30
20
10
38
36
– 75 – 50 – 25
0
25
50
75
100
125
0
0.1
0.4
TA – Free-Air Temperature – °C
1
4
10
f – Frequency – MHz
Figure 14
Figure 15
† Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
TYPICAL CHARACTERISTICS†
OUTPUT ENABLE AND DISABLE TIMES
vs
FREE-AIR TEMPERATURE
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
20
18
30
VCC = 5 V
CL = 30 pF
See Figure 1
Output Enable and Disable Times – ns
Propagation Delay Times From Data Inputs – ns
PROPAGATION DELAY TIMES
FROM DATA INPUTS
vs
FREE-AIR TEMPERATURE
16
tPLH
14
12
tPHL
10
8
6
4
2
0
– 75 – 50 – 25
0
25
50
75
100
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
VCC = 5 V
See Figures 2 and 3
25
tPLZ
20
tPZL
15
tPHZ
10
tPZH
5
0
– 75 – 50 – 25
125
TA – Free-Air Temperature – °C
0
25
50
75
100
125
TA – Free-Air Temperature – °C
Figure 17
Figure 16
† Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
APPLICATION INFORMATION
Location 5
Location 3
RT‡
RT‡
Location 6
Location 1
Location 2
Twisted
Pair
Location 4
SN75113 Driver
SN75115 Receiver
‡ RT = ZO. A capacitor may be connected in series with RT to reduce power dissipation.
Figure 18. Basic Party-Line or Data-Bus Differential Data Transmission
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
PACKAGE OPTION ADDENDUM
www.ti.com
4-Mar-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
Lead/Ball Finish
MSL Peak Temp (3)
5962-88744012A
ACTIVE
LCCC
FK
20
1
None
5962-8874401EA
ACTIVE
CDIP
J
16
1
None
POST-PLATE Level-NC-NC-NC
A42 SNPB
Level-NC-NC-NC
5962-8874401FA
ACTIVE
CFP
W
16
1
None
A42 SNPB
Level-NC-NC-NC
JM38510/10405BEA
ACTIVE
CDIP
J
16
1
None
A42 SNPB
Level-NC-NC-NC
SN55113J
ACTIVE
CDIP
J
16
1
None
A42 SNPB
Level-NC-NC-NC
SN75113D
OBSOLETE
SOIC
D
16
None
Call TI
Call TI
SN75113DR
OBSOLETE
SOIC
D
16
None
Call TI
Call TI
SN75113N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
Level-NC-NC-NC
SN75113NSR
ACTIVE
SO
NS
16
2000
Pb-Free
(RoHS)
CU NIPDAU
Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
SNJ55113FK
ACTIVE
LCCC
FK
20
1
None
SNJ55113J
ACTIVE
CDIP
J
16
1
None
A42 SNPB
Level-NC-NC-NC
SNJ55113W
ACTIVE
CFP
W
16
1
None
A42 SNPB
Level-NC-NC-NC
POST-PLATE Level-NC-NC-NC
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments Incorporated
Similar pages